Piezoelectric and dielectric characteristics of lead-free BNKLBT ceramic thick film and multilayered piezoelectric actuators
Source abstract
Abstract
Abstract Lead-free piezoelectric 0.885(Bi 0.5 Na 0.5 )TiO 3 –0.05(Bi 0.5 K 0.5 )TiO 3 –0.015(Bi 0.5 Li 0.5 )TiO 3 0.05BaTiO 3 ceramics (abbreviated as BNKLBT-1.5) were prepared by a conventional mixed oxide method. The composition has a piezoelectric d 33 constant of 154 × 10 −12 C/N, an electromechanical coupling coefficient k t of 0.519, a relatively low dissipation factor (tan δ = 1.6%) at 1 kHz. BNKLBT-1.5 multilayered actuators have been fabricated using a roll-casting technique. Each single layer has dimensions of 9.0 mm × 9.0 mm × 0.2 mm. Four multilayer actuators with 5, 10, 15 and 20 layers have been fabricated. Their capacitance and displacement under an a.c. field were measured. The capacitance measured at 1 kHz is 9.64 nF, 14.69 nF, 25.36 nF, 32.59 nF and the displacement measured at 5 kHz is 867 pm/V, 1331 pm/V, 2060 pm/V, 2442 pm/V, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Acoustic Wave Resonator Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. New ferroelectrics of complex composition
2. Electrostrictive strain and pyroeffect in the region of phase coexistance in Na0.5Bi0.5TiO310.1080/00150198808223232 ↗
3. Pyroelectric properties of (Bi1/2Na1/2)TiO3 ceramics10.1080/00150198408221371 ↗
4. Bismuth(III) oxide, chemwatch material safety data sheet
5. Lead oxide, chemwatch material safety data sheet
6. Thermal depoling process and piezoelectric properties of bismuth sodium titanate ceramics10.1063/1.3115409 ↗
7. (Bi0.5Na0.5)TiO3-BaTiO3 system for lead-free piezoelectric ceramics10.1143/JJAP.30.2236 ↗
8. Dielectric and piezoelectric properties of (Bi0.5Na0.5)TiO3-(Bi0.5K0.5)TiO3 systems10.1143/JJAP.38.5564 ↗
9. Lead-free piezoelectric ceramics based on (Bi1/2Na1/2)TiO3-NaNbO3
10. Lead-free piezoelectric ceramics of (Bi1/2Na1/2)TiO3-BiFeO3 system
11. Sintering behavior and electrical properties of (Bi1/2Na1/2)0.99Ca0.01TiO3 ceramics by two-stage calcination method10.4028/www.scientific.net/MSF.439.259 ↗
12. Large piezoelectric constant and high Curie temperature of lead-free piezoelectric ceramic ternary system based on bismuth sodium titanate–bismuth potassium titanate–barium titanate near the morphotropic phase boundary10.1143/JJAP.42.7401 ↗
13. Electromechanical and ferroelectric properties of (Bi1/2Na1/2)TiO3-(Bi1/2K1/2)TiO3-BaTiO3 lead-free piezoelectric ceramics10.1063/1.1767592 ↗
14. Dielectric behavior and microstructure of (Bi1/2Na1/2)TiO3–(Bi1/2K1/2)TiO3–BaTiO3 lead-free piezoelectric ceramics10.1063/1.1890453 ↗
15. Electromechanical and ferroelectric properties of (Bi1/2Na1/2)TiO3-(Bi1/2K1/2)TiO3-(Bi1/2Li1/2)TiO3-BaTiO3 lead-free piezoelectric ceramics for accelerometer application10.1007/s00339-007-4170-y ↗
16. Lead-free ceramics for pyroelectric applications10.1063/1.2927252 ↗
17. Bismuth sodium titanate based lead-free ultrasonic transducer for microelectronics wirebonding applications10.1016/j.ceramint.2007.09.085 ↗
18. Lead-free transducer for non-destructive evaluation10.1007/s00339-007-3971-3 ↗