Microstructural study of titanium carbonitride produced by combustion synthesis
Source abstract
Abstract
Abstract The self-propagating high-temperature synthesis (S.H.S.) process, which is promising for the fabrication of ceramic materials, was chosen to elaborate titanium carbonitride materials. The influence of parameters such as nitrogen gas pressure and carbon ratio on the microstructure was studied. A single phase product of Ti(C,N) is obtained for a carbon ratio under 15 at.% and a nitrogen pressure of 36 MPa. The increase of the carbon ratio corresponds to a decrease of the maximum temperature reached during the synthesis. Time resolved X-ray diffraction measurements (TRXRD) with the synchrotron radiation were used to determine the reaction mechanisms. We could observe that the synthesis of Ti(C,N) is preceded by the formation of titanium nitride. This reaction is initiated by the allotropic transition of α-Ti phase into β-Ti. In the final material the presence of sub-stoichiometric phases such as Ti 2 N and α-Ti was observed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Metal and Thin Film Mechanics · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Microstructural study of titanium nitride produced by high pressure combustion synthesis
2. Toth · 1971
3. Transition metal carbides, nitrides and carbonitrides
4. Structure refinement of titanium carbonitride10.1016/S0167-577X(97)00276-0 ↗
5. Ti(C, N) cermets—metallurgy and properties10.1016/0263-4368(95)00027-G ↗
6. Solid state properties of group IVb carbonitrides10.1016/0925-8388(94)01315-9 ↗
7. Combustion processes that synthesize materials10.1016/0924-0136(95)01837-9 ↗
8. Some aspects in self-propagating high-temperature synthesis10.1016/S0272-8842(03)00119-6 ↗
9. Temperature profiles analysis in combustion synthesis. I. Theory and background10.1111/j.1151-2916.1992.tb05461.x ↗
10. Theorical analysis in combustion synthesis. II. Experimental observation10.1111/j.1151-2916.1992.tb05462.x ↗
11. A new experimental setup for the time resolved X-ray diffraction study of self-propagating high-temperature synthesis10.1063/1.1435848 ↗
12. In situ synchrotron characterization of mechanically activated self-propagating high-temperature synthesis applied in Mo–Si system
13. Simultaneous IR and time-resolved X-ray diffraction measurements for studying self-sustained reactions10.1107/S0909049599013540 ↗
14. Microstructural and mechanistic analyses of SHS systems
15. Experimental evidence of the emptying core mechanism during combustion synthesis of TiC performed under isostatic gas pressure10.1023/A:1015247301495 ↗
16. Dunmead · J. Am. Ceram. Soc. · 1989 · 72 · 231810.1111/j.1151-2916.1989.tb06083.x ↗
17. The mechanism of combustion synthesis of titanium carbonitride10.1557/JMR.1994.0431 ↗