journal article·2017-12

High pressure in-situ synthesis and physical properties of Cr3C2-Ni cermets

Wenyan Zhai, Yimin Gao, Liang Sun, Yiran Wang, Ken Niwa, Masashi Hasegawa

Ceramics International· Volume 43· Issue 18
Publisher page

Abstract

Abstract A novel Cr 3 C 2 -Ni cermets were successfully in-situ synthesized with Cr, C and Ni (20 wt%) mixed-powder at 1100 °C under 0–6 GPa isostatic pressure using a small-sized cubic-type multi-anvil press apparatus. High purity Cr 3 C 2 phase was generated in the cermets. Comparing with the conventional and reactive sintering, the sintering temperature and the average grain size of Cr 3 C 2 decreased by 200 °C and 50%, respectively. The physical properties, normalized lattice parameters and volumes of Cr 3 C 2 −20 wt%Ni cermet as a function of pressure had been studied both experimentally and by first-principles calculations for the first time.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · MXene and MAX Phase Materials · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Porosity dependence of elastic modulus of porous Cr3C2 ceramics10.1016/j.ceramint.2013.05.122 ↗
2. Liquid-phase sintering and properties of Cr3C2/NiCr cermets10.1016/S0924-0136(97)00251-3 ↗
3. Micromechanical properties and erosive wear performance of chromium carbide based cermets10.1016/j.wear.2008.12.104 ↗
4. High-pressure stability and ambient metastability of marcasite-type rhodium pernitride10.1063/1.4941436 ↗
5. High pressure synthesis of marcasite-type rhodium pernitride10.1021/ic402885k ↗
6. Prediction on structural, mechanical and thermal properties of Al4SiC4, Al4C3 and 4H-SiC under high pressure by first-principles calculation10.1142/S0217984917500804 ↗
7. Cr3C2−20% Ni cermets prepared by high energy milling and reactive sintering, and their mechanical properties10.1080/17436753.2016.1149908 ↗
8. First-principles simulation: ideas, illustrations and the CASTEP code10.1088/0953-8984/14/11/301 ↗
9. Special points for Brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
10. Generalized gradient approximation for the exchange-correlation hole of a many-electron system10.1103/PhysRevB.54.16533 ↗
11. Microstructure and tunable dielectric properties of Ba0.6Sr0.4TiO3/Y2O3 composite ceramics10.1007/s10853-016-9922-7 ↗
12. Temperature-insensitive dielectric and piezoelectric properties in (1-x)K0.5Na0.5Nb0.997Cu0.0075O3-xSrZrO3 ceramics10.1016/j.jeurceramsoc.2017.01.021 ↗
13. An organic nonvolatile resistive switching memory device fabricated with natural pectin from fruit peel10.1016/j.orgel.2016.12.037 ↗
14. Effect of Cu ions assisted conductive filament on resistive switching memory behaviors in ZnFe2O4-based devices10.1016/j.jallcom.2016.10.008 ↗
15. Mechanical stability of possible structures of PtN investigated using first-principles calculations10.1103/PhysRevB.73.104118 ↗
16. Crystal structures and elastic properties of superhard IrN2 and IrN3 from first principles10.1103/PhysRevB.76.054115 ↗