journal article·2009-09

Preparation and characterization of sol–gel Al2O3/Ni–P composite coatings on carbon steel

Laima Luo, Jipeng Yao, Jian Li, Jia Yu

Ceramics International· Volume 35· Issue 7
Publisher page

Abstract

Abstract Ceramic films have been applied to improve the resistance against high temperature oxidation of carbon steels. Alumina film was prepared on carbon steel surface by a dip coating technique. Electroless Ni–P plating film has been pre-deposited as an intermediate layer to improve the adherence of the film to carbon steel substrate. The oxidation kinetics of coated sample was investigated by measuring weight gain at 800 °C for 100 h. The surface and cross-section morphology of samples before and after oxidation were characterized by scanning electron microscopy (SEM). The composition and element distribution at the interface of the coated samples were analyzed by energy dispersive spectroscopy (EDS) and EMAX. The results show that the composite coating is uniform. The alumina coating adhesion strength to the substrate is up to 20 ± 2 N in scratch test because the alumina film presents interdiffusion of nickel and aluminum during heat treatment. The oxidation resistance test indicates higher oxidation resistance of as-coated carbon steel comparing to uncoated ones.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Corrosion Behavior and Inhibition · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. Wear and electrochemical characterization of sol–gel alumina coating on chemically pre-treated mild steel substrate10.1016/j.surfcoat.2006.03.013 ↗
2. Wear resistant alumina coatings produced by a sol–gel process10.1016/j.surfcoat.2005.11.014 ↗
3. Characterisation of electrolytically deposited alumina and yttrium modified alumina coatings on steel10.1016/S0257-8972(02)00516-9 ↗
4. Sliding and abrasive wear of composite sol–gel alumina coated Al alloys10.1016/S0257-8972(00)00964-6 ↗
5. Multilayer sol–gel coatings for corrosion protection of magnesium10.1016/j.surfcoat.2004.10.066 ↗
6. Preparation and characterization of cerium doped silica sol–gel coatings on glass and aluminum substrates10.1016/j.jnoncrysol.2004.08.141 ↗
7. Oxidation protection of mild steel by zirconia sol–gel coatings10.1016/S0167-577X(01)00311-1 ↗
8. Effect of substrate surface modification on alumina composite sol–gel coatings10.1016/j.surfcoat.2005.03.045 ↗
9. Characterizing the microstructure and mechanical and electrochemical properties of novel ceramic/polymer sandwich structural coatings10.1016/j.surfcoat.2005.09.024 ↗
10. The use of electrochemical techniques to study the corrosion behaviour of organic coatings on steel pretreated with sol–gel zirconia films10.1016/S0013-4686(01)00653-3 ↗