Cutting characteristics of dental glass ceramics during in vitro dental abrasive adjusting using a high-speed electric handpiece
Source abstract
Abstract
Machinability is an important characteristic of dental ceramics for restorative dentistry because machining is not only commonly employed in dental CAD/CAM systems but also essential in dental adjustments for occlusal fitting and restorative quality. This paper reports on an in vitro study on machinability of dental ceramics by quantifying cutting characteristics of feldspar and leucite glass ceramics in simulated dental adjusting using a high-speed electric handpiece and diamond burs. Cutting forces, force ratio, energy, surface integrity and bur topography were evaluated as functions of clinically relevant cutting conditions. The results indicate that tangential and normal forces and specific cutting energy for both materials exhibited significant dependences (p p>0.01) but no correlations with the cutting conditions applied (p>0.05). At the slower feed rates or smaller depths of cut the cutting behaviors for the two materials were very similar in terms of cutting forces and specific cutting energy. At the deeper depths of cut or faster feed rates, normal forces for leucite glass ceramic were significantly higher than those for feldspar glass ceramic (p<0.01). However, leucite glass ceramic produced better cutting surfaces with less fracture areas compared with feldspar ceramic due to its lower index of brittleness and higher force threshold for brittle–ductile transition. This research provides a methodological qualification in evaluating cutting characteristics of dental ceramics and quality control in clinical dentistry.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dental materials and restorations · Dental Research and COVID-19 · Dental Implant Techniques and Outcomes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Ceramic materials in dentistry: historical evolution and current practice10.1111/j.1834-7819.2010.01299.x ↗
2. In vitro lifetime of dental ceramics under cyclic loading in water10.1016/j.biomaterials.2006.12.033 ↗
3. Recent advances in materials for all-ceramic restorations10.1016/j.cden.2007.04.006 ↗
4. Standardizing failure, success, and survival decisions in clinical studies of ceramic and metal–ceramic fixed dental prostheses10.1016/j.dental.2011.09.012 ↗
5. Clinical application of glass-ceramics in dentistry
6. Flexual strength and fracture toughness of dental core ceramics10.1016/S0022-3913(07)60045-6 ↗
7. Dental ceramics: an update10.4103/0972-0707.73379 ↗
8. Performance of dental ceramics: challenges for improvements10.1177/0022034510391795 ↗
9. An up to 16-year prospective study of 304 porcelain veneers
10. Porcelain laminate veneers: 6 to 12 year clinical evaluation—a retrospective study
11. Six-year follow-up with empress veneers
12. Materials design in the performance of all-ceramic crowns10.1016/j.biomaterials.2003.09.050 ↗
13. The use of cutting temperature to evaluate the machinability of titanium alloys10.1016/j.actbio.2008.08.016 ↗
14. Influence of grinding, sandblasting, polishing and heat treatment on the flexural strength of a glass-infiltrated alumina-reinforced dental ceramic10.1016/j.biomaterials.2003.08.056 ↗
15. An overview of in vitro abrasive finishing and CAD/CAM of bioceramics in restorative dentistry10.1016/j.ijmachtools.2005.07.045 ↗
16. Dental cutting: the historical development of diamond burs10.14219/jada.archive.1998.0316 ↗
17. Cracking of porcelain surfaces arising from abrasive grinding with a dental air turbine10.1111/j.1532-849X.2011.00760.x ↗
18. In vitro rapid adjustment of porcelain prostheses using a high-speed dental handpiece10.1016/j.actbio.2007.08.006 ↗
19. Effect of sandblasting on the long-term performance of dental ceramics10.1002/jbm.b.30097 ↗
20. Are electric handpieces an improvement?10.14219/jada.archive.2002.0061 ↗
21. The high-speed handpiece dilemma10.14219/jada.archive.1999.0064 ↗
22. Instruments and equipment for tooth preparation
23. S. Eikenberg, D. Roman, R. Debuque, et al., A comparison and evaluation of electric motor dental handpieces and air turbine dental handpieces, Great Lakes, Ill, United States Army Dental Research Attachment, Protocol, 451, 2000, pp. 1–75.
24. Comparison of cavity preparation quality using an electric motor handpiece and an air turbine dental handpiece10.14219/jada.archive.2005.0313 ↗
25. Comparison of cutting efficiencies between electric and air-turbine dental handpieces10.1016/S0022-3913(10)60013-3 ↗
26. In vitro comparison of the cutting efficiency and temperature production of ten different rotary cutting instruments. Part II: electric handpiece and comparison with turbine10.1016/S0022-3913(09)60064-0 ↗
27. Surface integrity and removal mechanism in simulated dental finishing of a feldspathic porcelain10.1002/jbm.b.30551 ↗
28. Mechanical characterization of dental ceramics by Hertzian contacts10.1177/00220345980770041201 ↗
29. Characterization of damage modes in dental ceramic bilayer structures10.1002/jbm.10091 ↗
30. Materials for chariside CAD/CAM-produced restorations10.14219/jada.archive.2006.0397 ↗
31. Strength and fracture pattern of monolithic CAD/CAM-generated posterior crowns10.1016/j.dental.2005.02.007 ↗
32. Performance evaluation of a dental handpiece in simulation of clinical finishing using a novel 2DOF in vitro apparatus10.1243/09544119JEIM98 ↗
33. Malkin · 1989
34. Indentation fracture toughness and dynamic elastic moduli for commercial feldspathic dental porcelain materials10.1016/S0109-5641(03)00092-7 ↗
35. Machinability and brittleness of glass-ceramics10.1016/S0924-0136(96)02275-3 ↗
36. Hardness, toughness and brittleness-indentation analysis10.1111/j.1151-2916.1979.tb19075.x ↗
37. Brittleness index of machinable dental materials and its relation to the marginal chipping factor10.1016/j.jdent.2007.07.002 ↗
38. A model for crack initiation in elastic/plastic indentation fields10.1007/BF00552240 ↗
39. Micromechanical and tribological characterization of hard amorphous carbon coatings as thin as 5nm for magnetic recording heads10.1016/S0043-1648(98)00242-7 ↗
40. I. Inasaki, H.R. Meyer, F. Klocke, J. Shibata, G. Spur, H.K. Tonshoff, H.G. Wobker, Grinding, in: I.D. Marinescu, H.K. Tonshoff, I. Inasaki (Eds.), Handbook of Ceramic Grinding and Polishing, Noyes Publications, Park Ridge, New Jersey, 2000, pp. 194–200.10.1016/B978-081551424-4.50006-8 ↗
41. Marinescu · 2004
42. High speed versus conventional grinding in high removal rate machining of alumina and alumina–titania10.1016/j.ijmachtools.2004.10.016 ↗
43. The energy requirement of the dental cutting process10.1111/j.1365-2842.1980.tb01463.x ↗
44. Upper bound analysis for specific energy in grinding of ceramics10.1016/S0043-1648(98)00283-X ↗
45. Grinding mechanisms and energy balance for ceramics10.1115/1.2833081 ↗
46. Size effect for specific energy in grinding of silicon nitride10.1016/S0043-1648(98)00406-2 ↗
47. Grinding mechanisms for ceramics10.1016/S0007-8506(07)60511-3 ↗
48. 2007
49. Surface morphology and fracture in handpiece adjusting of a leucite-reinforced glass ceramic with coarse diamond burs10.1016/j.msea.2011.11.058 ↗
50. Effect of overglazed and polished surface finishes on the compressive fracture strength of machinable ceramic materials10.4012/dmj.2010-029 ↗