journal article·2014-09

LiCoPO4 mechanical properties evaluated by nanoindentation

J. Wolfenstine, J.L. Allen, T.R. Jow, T. Thompson, J. Sakamoto, H. Jo, H. Choe

Ceramics International· Volume 40· Issue 8
Publisher page

Abstract

Abstract LiCoPO 4 is a promising cathode material for use in high voltage Li-ion batteries. One of the problems with LiCoPO 4 is limited cycle life. One possible cause for the limited cycle life of LiCoPO 4 is mechanical degradation. As a consequence, the mechanical properties, elastic modulus, E , and fracture toughness, K IC , of hot-pressed dense (~98%) polycrystalline (15–20 μm) single phase LiCoPO 4 were investigated. E for the hot-pressed LiCoPO 4 specimen is ~137 GPa while the E value for the LiCoPO 4 specimen after annealing at 600 °C is ~106 GPa. The fracture toughness of the hot-pressed LiCoPO 4 sample is ~0.41 MPa m 1/2 , which increased to ~0.53 MPa m 1/2 after annealing. These low K IC values reveal that LiCoPO 4 is a brittle material. It is believed that the decrease in E and increase in K IC with annealing is associated with a reduction in residual stress.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced ceramic materials synthesis · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Olivine LiCoPO4 as 4.8V electrode material for lithium batteries10.1149/1.1390994 ↗
2. Preparation of LiCoPO4 for lithium battery cathodes through solution process10.5796/electrochemistry.71.1192 ↗
3. Electrochemical and structural study of LiCoPO4-based electrodes10.1007/s10008-004-0497-x ↗
4. Effect of oxygen partial pressure on the discharge capacity of LiCoPO410.1016/j.jpowsour.2004.12.013 ↗
5. Improved cycle life of Fe-substituted LiCoPO410.1016/j.jpowsour.2011.06.057 ↗
6. Cracking causing cyclic instability of LiFePO4 cathode material10.1016/j.jpowsour.2004.06.059 ↗
7. Nanomechanical quantification of elastic, plastic and fracture properties of LiCoO210.1002/aenm.201200107 ↗
8. Transmission electron microscope studies of LiNi(1/3)Mn(1/3)Co(1/3)O(2) before and after long-term aging at 70°C10.1149/1.2919713 ↗
9. Electrochemical shock of intercalation electrodes; a fracture mechanics analysis10.1149/1.3464773 ↗
10. Averting cracks caused by insertion reaction in lithium-ion batteries10.1557/JMR.2010.0142 ↗
11. Critical grain size for microcracking during lithium insertion10.1016/S0378-7753(99)00052-X ↗
12. Decrepitation model for capacity loss during cycling of alloys in rechargeable electrochemical systems10.1007/BF02375547 ↗
13. Design criteria for nanostructured Li-ion batteries10.1016/j.jpowsour.2006.10.070 ↗
14. Cyclable lithium and capacity loss in Li-ion cells10.1149/1.2185287 ↗
15. Transport properties of LiCoPO4 and Fe-substituted LiCoPO410.1016/j.jpowsour.2013.12.111 ↗
16. Comparison of different experimental techniques for determination of elastic properties of solids10.1016/j.msea.2003.09.080 ↗
17. Microstructures and mechanical properties of a directionally solidified NiAl-Mo eutectic alloy10.1016/j.actamat.2004.09.003 ↗
18. An improved technique for determining hardness and elastic-modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
19. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
20. Determination of fracture toughness from the extra penetration produced by indentation-induced pop-in10.1557/JMR.2003.0194 ↗
21. Determination of fracture toughness and energy of dissipation of SiO2-poly(methyl metacrylate) hybrid films by nanoindentation10.1016/j.tsf.2011.04.019 ↗
22. Fracture toughness from submicron derived indentation cracks10.1063/1.1711164 ↗
23. Poisson׳s ratio and modern materials10.1038/nmat3134 ↗
24. Lattice dynamics, thermodynamics and bonding strength of lithium-ion battery materials LiMPO4 (M=Mn, Fe, Co and Ni): a comparative first-principles study10.1039/C1JM13547C ↗
25. High pressure polymorphs of LiCoPO4 and LiCoAsO410.1016/j.solidstatesciences.2008.09.012 ↗
26. Barrett · 1973
27. Barsoum · 1997
28. Chiang · 1979
29. Piezospectroscopic determination of residual stresses in polycrystalline alumina10.1111/j.1151-2916.1994.tb06996.x ↗
30. The plastic resistance of crystals10.1071/PH600327a ↗
31. Hardness and bonding in A15 superconducting compounds
32. An experimental and computational study of the electrode material olivine-LiCoAs410.1149/1.2168376 ↗
33. Elastic properties of olivine LixFePO4 from first principles10.1103/PhysRevB.73.174112 ↗
34. Determination of fracture toughness of bulk materials and the thin films by nanoindentation: comparison of different models10.1080/14786435.2010.487984 ↗
35. Davidge · 1979