journal article·2017-05

Effect of TiO 2 additions on densification and mechanical properties of new mulltifunction resistant porcelains using economic raw materials

Abedelhamid Harabi, Souad Kasrani, Lazhar Foughali, Ismahan Serradj, Mohamed Tayeb Benhassine, Saida Kitouni

Ceramics International· Volume 43· Issue 7
Publisher page

Abstract

Abstract The aim of this work is to determine the effect of TiO 2 on sintering and mechanical proprieties of new multifunction resistant (MFR) porcelain prepared from local abundant raw materials. Based on a preliminary work, the new selected composition was 30 wt% kaolins (20 wt% kaolin halloysite type + 10 wt% kaolin Tamazart), 45 wt% k-feldspar and 25 wt% quartz and containing different contents of TiO 2 (3, 5 and 8 wt%). The sintering temperatures of mixtures were between 1140 and 1260 °C. Subsequently, the obtained phases in the elaborated samples were investigated by X-ray diffraction and Fourier transform infrared spectroscopy analyses, Raman spectroscopy and SEM analysis. The optimum sintering conditions gave a higher bulk density (2.47 g.cm −3 ) and excellent mechanical properties: The three point flexural strength (3PFS), Vickers micro-hardness (VMH) and apparent porosity (P A ) of porcelains sintered at 1160 °C were 238 MPa, 12.3 GPa and 2%, respectively. This obtained 3PFS value is drastically higher than that achieved for conventional porcelains (ranged between 60 and 80 MPa). Moreover, these two best 3PFS (238 MPa) and VMH (12.3 GPa) values achieved for this new MFR porcelains were considerably higher when compared to those values (3PFS=218 MPa and VMH=6.5 GPa) obtained by others for porcelain −30% ZrO 2 composite, even though their mixtures were hot pressed in vacuum at 970 °C for 2 min. Besides, the maximum value achieved for the new MFR porcelains is nearby that of the flexural strength of porcelain containing 5 wt% TiO 2 and 30 wt % alumina (about 240 MPa). In other words, the presence of 30 wt % alumina in their product well confirm the benefic effect of the used raw materials (saving 30 wt % alumina) on porcelain strengthening.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Bone Tissue Engineering Materials · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Effect of thickness and orientation of alumina fibrous thermal insulation on microwave heating in a modified domestic 2.45 GHz multi-mode cavity, Int10.1111/j.1744-7402.2011.02632.x ↗
2. Mechanical properties of sintered alumina - chromia refractories
3. Sintering and mechanical properties of porcelains prepared from Algerian raw materials10.1590/S0366-69132011000400013 ↗
4. A new and economic approach to fabricate resistant porous membrane supports using kaolin and CaCO310.1016/j.jeurceramsoc.2013.11.007 ↗
5. Effect of P2O5 on mechanical properties of porous natural hydroxyapatite derived from cortical bovine bones sintered at 1050 °C10.1080/19443994.2015.1022000 ↗
6. A modified milling system, using a bimodal distribution of highly resistant ceramics
7. Influence of composition on mechanical behaviour of porcelain tile
8. Investigation of the effects of different deflocculants on the viscosity of slips
9. A view of whitewares mechanical strength and microstructure10.1016/S0272-8842(02)00234-1 ↗
10. Effect of substitution of fly ash for quartz in triaxial kaolin–quartz–feldspar system10.1016/j.jeurceramsoc.2003.10.008 ↗
11. Porcelain-raw materials, processing, phase Evolution, and mechanical behavior10.1111/j.1151-2916.1998.tb02290.x ↗
12. Electrical resistivity of porcelain in relation to constitution10.1016/S0272-8842(98)00006-6 ↗
13. Mechanical strength of porcelain10.1111/j.1151-2916.1957.tb12626.x ↗
14. The use of a diatomite–kaolin composite coating to design the pore characteristics of a sintered diatomite membrane10.1016/j.ceramint.2013.07.140 ↗
15. Effect of titania on fired characteristics of triaxial porcelain10.1007/BF02711234 ↗
16. Van Noort · 2002 · 231
17. Preparation and characterization of new dental porcelains, using K-feldspar and quartz raw materials
18. Cornell · 2002
19. FTIR and FT-Raman spectroscopic studies of fired clay artifacts recently exacavated in tamilnadu
20. Phase changes of ceramic whiteware slip-casting bodies studied by XRD and FTIR10.1016/j.ceramint.2006.03.016 ↗
21. Effect of hydrolyzed surface layer on the cytotoxicity and chemical resistance of a low fusing porcelain10.1016/S0109-5641(02)00066-0 ↗
22. Ash melting behavior by Fourier transform infrared spectroscopy, J. china univ
23. Microstructural characterization of sanitaryware by infrared and Raman spectroscopy, the role of vitreous matrix on propierties, J. Ceram
24. J. Geophys. Res, High-temperature raman spectroscopy of SiO2 and GeO2 Polymorphs: Anharmonicity and thermodynamic properties at high-temperatures10.1029/JB095iB13p21635 ↗
25. Raman spectroscopic study of microcrystalline silica
26. Microstructural evolution in triaxial porcelain10.1111/j.1151-2916.2000.tb01692.x ↗
27. Effect of TiO2 on the mullite formation and mechanical properties of alumina porcelain10.1016/j.jeurceramsoc.2009.10.009 ↗
28. Dielectric properties and characterization of titanium dioxide obtained by different chemistry methods10.1155/2014/124814 ↗
29. Etude de la Transformation de trois nuances de kaolin en fonction de la tempe´rature
30. Porcelain tile composition: effect on the phase formation andend products
31. Nanocrystalline TiO2 studied by optical, FTIR and X-ray photoelectron spectroscopy: correlation to presence of surface states10.1016/S0040-6090(99)00722-1 ↗
32. Effects of silica sol on the microstructure and mechanical properties of CaSiO3 bioceramics
33. Effect of wollastonite addition on sintering of hard porcelain10.1016/j.ceramint.2014.12.126 ↗
34. Effect Of Addition of TiO2 As Dopant On The Physico-Mechanical Properties of Triaxial Porcelain
35. Titania doped triaxial porcelain: Enhancement of strength by controlled heat treatment10.1007/s12034-007-0041-6 ↗
36. On the mechanical properties and microstructure of zirconia-reinforced feldspar-based porcelain10.1016/j.ceramint.2016.05.195 ↗
37. Effect of alumina and titania additions on properties of porcelain bodies from murakami sericite10.1016/0272-8842(88)90024-7 ↗
38. Significance of structure – property relationship in alumina based porcelain insulators to achieve quality10.1007/BF02708538 ↗
39. Measurement of Vickers hardness on ceramic floor tiles10.1016/j.jeurceramsoc.2006.04.150 ↗
40. Crowns and extra coronal restorations: materials selection10.1038/sj.bdj.4801334 ↗