journal article·2018-04

Comparison of ZnO and Ti-doped ZnO sensing membrane applied in electrolyte-insulator-semiconductor structure

Ming Ling Lee, Jer Chyi Wang, Chyuan Haur Kao, Hsiang Chen, Chan Yu Lin, Che Wei Chang, Rama Krushna Mahanty, Chun Fu Lin, Kow Ming Chang

Ceramics International· Volume 44· Issue 6
Publisher page

Abstract

Abstract In this paper, we demonstrate electrolyte-insulator-semiconductor devices for biochemical sensing applications prepared from ZnO and Ti-doped ZnO sensing membranes deposited on Si substrates by radio frequency sputtering. The structural, morphological, and compositional features of these deposited films with multitemperature annealing were studied using X-ray diffraction, atomic force microscopy, and X-ray photoelectron spectroscopy, respectively. Sensitivity, linearity, hysteresis, and drift rate were measured to determine the sensing and reliability performance of all fabricated devices. Compared to the ZnO electrolyte-insulator-semiconductor (EIS), the Ti-doped ZnO EIS sensor annealed at 700 °C exhibits a higher sensitivity of 57.56 mV/pH, lower hysteresis of 2.79 mV, and lower drift rate of 0.29 mV/h. For Ti-doped ZnO, sensitivities of 3.62 mV/mM and 6.42 mV/mM were obtained for urea and glucose sensing, respectively. The improvements are owing to Ti-doping, which produces a rougher sensing surface, a well-crystallized grain structure, and thinner silicate and SiO2 at the silicon-oxide interface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Analytical Chemistry and Sensors · Gas Sensing Nanomaterials and Sensors · Electrochemical sensors and biosensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. (Bio)sensors for measurement of analytes implicated in food safety: a review10.1016/S0165-9936(01)00136-4 ↗
2. Modeling ISFET microsensor and ISFET-based microsystems: a review10.1016/S0925-4005(04)00107-8 ↗
3. Surface potential behavior in ISFET based bio-(chemical) sensor
4. IGZO nanoparticle-modified silicon nanowires as extended-gate field-effect transistor pH sensors10.1016/j.snb.2013.04.060 ↗
5. A novel hydrogen peroxide sensor based on horseradish peroxidase immobilized on colloidal Au modified ITO electrode10.1016/j.elecom.2003.12.004 ↗
6. Study of amorphous tin oxide thin films for ISFET applications10.1016/S0925-4005(98)00162-2 ↗
7. Recent progress in the ZnO nanostructure-based sensors10.1016/j.mseb.2011.09.005 ↗
8. Single cuprous oxide films synthesized by radical oxidation at low temperature for PV application10.1364/OE.21.011448 ↗
9. Femtosecond laser direct writing of microholes on roughened ZnO for output power enhancement of InGaN light-emitting diodes10.1364/OL.41.003463 ↗
10. Multianalyte biosensor based on pH-sensitive ZnO electrolyte-insulator- semiconductor structures10.1063/1.4874182 ↗
11. Study of TiO2 thin films for ion sensitive field effect transistor application with RF sputtering deposition10.1143/JJAP.43.61 ↗
12. Ti-doped Gd2O3 sensing membrane for electrolyte – insulator – semiconductor pH sensor10.1016/j.tsf.2011.11.063 ↗
13. Comparison of structural and sensing characteristics of Pr2O3 and PrTiO3 sensing membrane for pH-ISFET application10.1016/j.snb.2008.02.022 ↗
14. Thermodynamic investigation of Ti doping in MgAl2O4 based on the first-principles method10.1039/C5TC01593F ↗
15. High-κ Dy2TiO5 electrolyte-insulator-semiconductor urea biosensors10.1149/1.3547723 ↗
16. Effects of Ti addition and annealing on high-k Gd2O3 sensing membranes on polycrystalline silicon for extended-gate field-effect transistor applications10.1016/j.apsusc.2013.09.080 ↗
17. Interface formation during molecular beam epitaxial growth of neodymium oxide on silicon10.1063/1.2188051 ↗
18. High-k Nd2O3 and NdTiO3 charge trapping layers for nonvolatile memory metal-SiO2-high-k-SiO2-silicon devices10.1149/1.2967718 ↗
19. Structural properties and sensing performance of high-k Nd2TiO5 thin layer-based electrolyte-insulator-semiconductor for pH detection and urea biosensing10.1016/j.bios.2009.02.018 ↗
20. A general model to describe the electrostatic potential at electrolyte oxide interfaces10.1016/S0001-8686(96)00307-7 ↗
21. Structural and sensing characteristics of Gd2Ti2O7, Er2TiO5 and Lu2Ti2O7 sensing membrane electrolyte–insulator–semiconductor for bio-sensing applications10.1016/j.electacta.2012.10.099 ↗
22. Thermal stability and electrical characteristics of ultrathin hafnium oxide gate dielectric reoxidized with rapid thermal annealing10.1063/1.126214 ↗
23. Interfacial defect states in HfO2 and ZrO2 nMOS capacitors10.1109/LED.2002.805753 ↗
24. Characterizations of MoTiO5 flash memory devices with post-annealing10.1016/j.tsf.2014.02.032 ↗
25. A physical model for drift in pH ISFETs10.1016/S0925-4005(98)00040-9 ↗
26. H+, Na+, and K+ ion sensing properties of sodium and aluminum coimplanted LPCVD silicon oxynitride thin films10.1016/S0169-4332(02)01527-1 ↗
27. Biosensors for life quality – design, development and applications10.1016/j.snb.2004.04.084 ↗