A sensitive lead titanate nano-structured sensor for electrochemical determination of pentoxifylline drug in real samples
Source abstract
Abstract
Nanostructured materials, because of their important characteristics have been the focus of serious interest for the last decade world-wide. In this field most of the novel and remarkable properties appear when the particle size ranges exist below 100 nm [ 1 , 2 ]. Ferroelectric compounds are a group of materials that possess low dielectric loss, high dielectric constants, high electrical resistivity and suitable electrooptical and electromechanical activates [ 3 ]. Ferroelectric materials that have perovskite structure (ABO 3 ), such as lead titanate (PbTiO 3 ) and barium titanate (BaTiO 3 ), are the most investigated ferroelectric oxide compounds due to their versatile characteristics for application in actuators, thin film capacitors, pyroelectric sensors and nonlinear optics. The materials with nano-sized dimensions have established significant research attention because of the unconventional physical and chemical behaviour at the nanoscale dimensions [ 4 , 5 ]. PbTiO 3 is usually used in numerous electronic devices due to a high pyroelectric coefficient and low permittivity [ 6 , 7 ]. Some methods have been reported for preparation of PbTiO 3 , such as sol–gel method [ 8 ], hydrothermal synthesis [ 9 ], dip-pennanolithography [ 10 ] and liquid–solid–solution route [ 11 ]. It is known that chemical synthesis routes can be provide precise composition, high chemical purity, uniform microstructures and without high formation temperature of the perovskite phase based on molecular scale mixing in the preparation of the precursor. The sol–gel method is a usually applied chemical route for preparation of homogeneous large area thin films and uniform powders in micrometer, sub-micrometer or nanometer scales [ 12 , 13 ].
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Analytical Chemistry and Sensors · Electrochemical sensors and biosensors · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Wang, J., Xu, J., Goodman, M.D., Chen, Y., Cai, M., Shinar, J., Lin, Z.Q.: A simple biphasic route to water soluble dithiocarbamate functionalized quantum dots. J. Mater. Chem. 18, 3270–3274 (2008)10.1039/b803618g ↗
2. Nafari, A., Bowland, C.C., Sodano, H.A.: Ultra-long vertically aligned lead titanate nanowire arrays for energy harvesting in extreme environments. Nano Energy 31, 168–173 (2017)10.1016/j.nanoen.2016.11.015 ↗
3. Wang, J., Pang, X., Akinc, M., Lin, Z.: Synthesis and characterization of perovskite PbTiO3 nanoparticles with solution processability. J. Mater. Chem. 20, 5945–5949 (2010)10.1039/c0jm00270d ↗
4. Shimada, T., Xu, T., Uratani, Y., Wang, J., Kitamura, T.: Unusual multiferroic phase transitions in PbTiO3 nanowires. Nano Lett. 16, 6774–6779 (2016)10.1021/acs.nanolett.6b02370 ↗
5. Shimada, T., Xu, T., Araki, Y., Wang, J., Kitamura, T.: Multiferroic dislocations in ferroelectric PbTiO3. Nano Lett. 17, 2674–2680 (2017)10.1021/acs.nanolett.7b00505 ↗
6. Wang, G.Z., Saeterli, R., Rorvik, P.M., Helvoort, A.T.J.V., Holmestad, R., Grande, T., Einarsrud, M.A.: Self-Assembled growth of PbTiO3 nanoparticles into microspheres and bur-like structures. Chem. Mater. 19, 2213–2221 (2007)10.1021/cm063047d ↗
7. Selbach, S.M., Wang, G.Z., Einarsrud, M.A., Grande, T.: Decomposition and crystallization of a sol–gel-derived PbTiO3 precursor. J. Am. Ceram. Soc. 90, 2649–2652 (2007)10.1111/j.1551-2916.2007.01789.x ↗
8. Hernandez-Sanchez, B.A., Chang, K.-S., Scancella, M.T., Burris, J.L., Kohli, S., Fisher, E.R., Dorhout, P.K.: Examination of size-induced ferroelectric phase transitions in template synthesized PbTiO3 nanotubes and nanofibers. Chem. Mater. 17, 5909–5919 (2005)10.1021/cm0493896 ↗
9. Wang, Y.G., Xu, G., Yang, L.L., Ren, Z.H., Wei, X., Weng, W.J., Du, P.Y., Shen, G., Han, G.R.: Preparation of single-crystal PbTiO3 nanorods by phase transformation from Pb2Ti2O6 nanorods. J. Alloys Compd. 481, L27–L30 (2009)10.1016/j.jallcom.2009.03.073 ↗
10. Son, J.Y., Shin, Y.H., Ryu, S., Kim, H., Jang, H.M.: Dip-pen lithography of ferroelectric PbTiO3 nanodots. J. Am. Chem. Soc. 131, 14676–14678 (2009)10.1021/ja906871b ↗
11. Wang, X., Zhuang, J., Peng, Q., Li, Y.D.: A general strategy for nanocrystal synthesis. Nature 437, 121–124 (2005)10.1038/nature03968 ↗
12. Omanwar, S.K., Jaiswal, S.R., Bhatkar, V.B., Koparkar, K.A.: Comparative study of nano-sized Al2O3 powder synthesized by sol-gel (citric and stearic acid) and aldo-keto gel method. Optik 158, 1248–1254 (2018)10.1016/j.ijleo.2017.12.068 ↗
13. Najafi, A., Golestani-Fard, F., Rezaie, H.R.: Sol-gel synthesis and characterization of B4C nanopowder. Ceram. Int. 44, 21386–21394 (2018)10.1016/j.ceramint.2018.08.196 ↗
14. Tsvetkova, B.G., Pencheva, I.P., Peikov, P.T.: Simultaneous determination of pentoxifylline and its impurities in tablet dosage forms by RP-HPLC. Der Pharma Chemica 4, 608–612 (2012)
15. Told, R., Fuchsjäger-Mayrl, G., Wolzt, M., Popa-Cherecheanu, A., Schmetterer, L., Garhofer, G.: Interaction between leukocytes and erythrocytes in the human retina: effects of pentoxifylline on hyperoxia-induced vasoconstriction during increased neutrophil counts. Microvasc. Res. 92, 85–90 (2014)10.1016/j.mvr.2014.01.004 ↗
16. Unal, C., Sen, C., Iscen, D., Dalcic, H.: In vivo observation of leukocyte-endothelium interaction in ischemia reperfusion injury with the dorsal window chamber and the effects of pentoxifylline on reperfusion injury. J. Surg. Res. 138, 259–266 (2007)10.1016/j.jss.2006.05.019 ↗
17. Martos-Fernández, M., Saez-Barba, M., López-López, J., Estrugo-Devesa, A., María Balibrea-del-Castillo, J., Bescós-Atín, C.: Pentoxifylline, tocopherol, and clodronate for the treatment of mandibular osteoradionecrosis: a systematic review. Oral Surg. Oral Med. Oral Pathol. Oral Radiol. Endod. 125, 431–439 (2018)10.1016/j.oooo.2018.02.004 ↗
18. Tsvetkova, B.G., Pencheva, I.P., Peikov, P.T.: Simultaneous determination of pentoxifylline and its impurities in tablet dosage forms by RP-HPLC. Der Pharma Chemica 4, 608–612 (2012)
19. Saša, B., Odon, P., Stane, S., Julijana, K.: Analysis of surface properties of cellulose ethers and drug release from their matrix tablets. Eur. J. Pharm. Sci. 27, 375–383 (2006)10.1016/j.ejps.2005.11.009 ↗
20. Grozdanovic, O., Antic, D., Agbada, D.: Development of a HPTLC method for in-process purity testing of pentoxifylline. J. Sep. Sci. 28, 575–580 (2005)10.1002/jssc.200400006 ↗
21. Abbar, J., Malode, S., Nandibewoor, S.: Electrochemical determination of a hemorheologic drug, pentoxifylline at a multi-walled carbon nanotube paste electrode. Bioelectrochemistry 83, 1–7 (2012)10.1016/j.bioelechem.2011.06.008 ↗
22. Khoobi, A., Ghoreishi, S.M., Behpour, M., Shaterian, M., Salavati-Niasari, M.: Design and evaluation of a highly sensitive nanostructure-based surface modification of glassy carbon electrode for electrochemical studies of hydroxychloroquine in the presence of acetaminophen. Colloids Surf. B 123, 648–656 (2014)10.1016/j.colsurfb.2014.10.002 ↗
23. Zare, K., Sadjadi, M.S., Enhessari, M., Khanahmadzadeh, S.: Synthesis and characterization of PbTiO3 nanopowders by citric acid gel method. J. Phys. Theor. Chem. 6, 9–12 (2009)