Effect of deposition temperature on the mechanical, corrosive and tribological properties of mullite coatings
Source abstract
Abstract
Abstract Thermal-sprayed ceramic coatings are used worldwide to provide protection from corrosion and wear on components. Nevertheless, they exhibit very poor tribological performance in corrosive conditions, primarily because the high porosity and low cohesive strength, resulting in severe corrosion of metal materials and wear of coatings. Herein, a series of mullite coatings are deposited on the surface of titanium alloys under different deposition temperatures and the splats behavior, mechanical properties, corrosion and wear performance of mullite coatings are studied. Results show that adjusting the deposition temperature can modify the splats behaviors, improve the microstructure and degree of crystallinity and enhance the hardness and cohesive strength. Owing to the improvements, the specimens deposited at higher temperatures have the excellent anti-corrosion and wear-resistant ability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Plasma thermal spray of ceramic oxide coating on carbon steel with enhanced wear and corrosion resistance for oil and gas applications10.1016/j.ceramint.2014.06.017 ↗
2. Preparation of plasma sprayed mullite coating on stainless steel substrate and investigation of its environmental dependence of friction and wear behavior10.1016/j.triboint.2015.06.022 ↗
3. Bioinspired smart coating with superior tribological performance
4. Thermal oxidation behavior and tribological properties of textured TC4 surface: influence of thermal oxidation temperature and time10.1016/j.triboint.2015.10.013 ↗
5. Diffusive thermal treatments combined with PVD coatings for tribological protection of titanium alloys10.1016/j.matdes.2015.10.011 ↗
6. Effect of phosphorus-ion implantation on the corrosion resistance and biocompatibility of titanium10.1016/S0142-9612(02)00020-0 ↗
7. Titanium alloys after surface gas nitriding10.1016/j.surfcoat.2006.04.019 ↗
8. Influence of microstructure on the wear and corrosion behavior of detonation sprayed Cr2O3-Al2O3 and plasma sprayed Cr2O3 coatings10.1016/j.ceramint.2017.10.203 ↗
9. Heimann · 2008
10. Stress analysis and failure mechanisms of plasma-sprayed thermal barrier coatings
11. Excellent wear resistance of plasma-sprayed amorphous Al2O3–Y3Al5O12 ceramic coating10.1016/j.surfcoat.2017.07.038 ↗
12. Effect of sealing treatment on the corrosion resistance of thermal-sprayed ceramic coatings10.1016/j.surfcoat.2004.08.009 ↗
13. Comparative study on wear behavior of plasma sprayed Al2O3 coatings sliding against different counterparts10.1016/j.ceramint.2017.02.122 ↗
14. Influence of doping graphite on microstructure and tribological properties of plasma sprayed 3Al2O3–2SiO2 coating10.1016/j.triboint.2016.04.028 ↗
15. Thermomechanical properties and thermal cycle resistance of plasma-sprayed mullite coating and mullite/zirconia composite coatings10.1016/j.ceramint.2016.08.049 ↗
16. Water vapor corrosion of mullite containing small amount of sodium10.1016/j.ceramint.2004.03.044 ↗
17. Mullite for structural, electronic, and optical applications10.1111/j.1151-2916.1991.tb06768.x ↗
18. Effect of critical plasma spraying parameter on microstructure and wear behavior of mullite coatings10.1016/j.triboint.2015.08.031 ↗
19. Effect of spraying parameter and injector angle on the properties of in-flight particles and alumina coatings on Al alloy with PA-HT10.1016/j.ceramint.2017.11.085 ↗
20. Improving interfacial, mechanical and tribological properties of alumina coatings on Al alloy by plasma arc heat-treatment of substrate10.1016/j.apsusc.2017.03.170 ↗
21. Evaporated-gas-induced splashing model for splat formation during plasma spraying10.1016/j.surfcoat.2003.10.048 ↗
22. Microstructural and thermal properties of plasma sprayed mullite coatings10.1016/j.ceramint.2010.02.007 ↗
23. Influence of microstructure on the ionic conductivity of plasma-sprayed yttria-stabilized zirconia deposits10.1111/j.1551-2916.2008.02775.x ↗
24. Thermomechanical properties and thermal cycle resistance of plasma-sprayed mullite coating and mullite/zirconia composite coatings