Cu incorporated perovskite Na0.5Bi0.5TiO3 oxygen-defect conductor as NO2 sensor using CuO sensitive electrode
Source abstract
Abstract
Abstract In this work, perovskite Na0.5Bi0.5TiO3 is applied as oxygen-defect conductor of NO2 sensor fabricated with CuO as the sensing electrode and Pt as reference electrode. Transition metal ion Cu2+ serves as a dopant of Na0.5Bi0.5TiO3 at B site in view of its dual functions in both creating as many oxygen vacancies as possible and extending the length of the triple phase boundaries together with CuO sensing electrode. The phase transformation from the cubic to rhombohedral phase occurs in the process of increasing Cu2+ contents, resulting in greater lattice distortion and thus generating more oxygen vacancies. The expansion of the lattice volume and the overflowed Bi2O3 promote oxygen hopping in the [BO6]∝ chains of the solid electrolyte. The electrochemical results indicate that the Na0.5Bi0.5Ti0.85Cu0.15O3-δ sensor exhibits excellent response-recovery characteristics with high sensitivity (24.49 nA/ppm) upon exposed to 500 ppm NO2 at 500 °C. The possible coexistent gases affect little on the response current of the sensor towards NO2 gas. The long-term stability measurement illustrates that there is only a slight 1.36 μA drop in response current value after aging storage for one and a half months. The performances of the sensors based on non-rare-earth Cu-doped Na0.5Bi0.5TiO3 solid electrolytes exhibit the better-off application prospect with low cost at low-medium temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Analytical Chemistry and Sensors · Ferroelectric and Piezoelectric Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Amperometric NOx sensor based on oxygen pumping current by using LaGaO3-based solid electrolyte for monitoring exhaust gas10.1016/j.snb.2004.11.076 ↗
2. Electrochemical NOx sensors based on interfacing nano-sized LaFeO3 perovskite-type oxide and ionic conductors10.1149/1.1386921 ↗
3. La-doped BaFeO3−δ perovskite as a cobalt-free oxygen reduction electrode for solid oxide fuel cells with oxygen-ion conducting electrolyte10.1039/c2jm31711g ↗
4. Na0.5Bi0.5TiO3‐K0.5Bi0.5TiO3 (NBT‐KBT) system: a structural and electrical study10.1002/pssa.2211570234 ↗
5. Lead-free piezoelectric ceramics based on (Bi1/2Na1/2)TiO3-NaNbO310.1080/00150199708224156 ↗
6. Lead-free piezoelectric ceramics of (BiNa)TiO-BaTiO-BiFeO system10.1080/00150199908224350 ↗
7. Piezoelectric properties of some lead-free ferroelectric ceramics10.1080/00150199908214902 ↗
8. Dielectric and piezoelectric properties of lead-free (Bi0.5Na0.5)TiO3 -BaTiO3 ferroelectric ceramics10.3740/MRSK.2005.15.11.683 ↗
9. Present status of non-lead-based piezoelectric ceramics10.4028/www.scientific.net/KEM.157-158.57 ↗
10. A novel highly sensitive NO2 sensor based on perovskite Na0.5+xBi0.5TiO3−δ electrolyte10.1038/s41598-017-05169-4 ↗
11. Solution-based synthesis of efficient WO3 sensing electrodes for high temperature potentiometric NOx, sensors10.1016/j.snb.2008.09.017 ↗
12. Sensing properties of MOx/YSZ/Pt ( MOx = Cr2O3, SnO2, CeO2 ) potentiometric sensor for NO2 detection10.1149/1.2347104 ↗
13. Sensing mechanism of non-nernstian planar sensors based on YSZ with oxide electrodes
14. Investigation on Impedencemetric-type NO2 sensor based on La0.75Sr0.25Mn0.5Co0.5O3-δ sensing electrode10.3724/SP.J.1077.2011.00523 ↗
15. Non-nernstian planar sensors based on YSZ with a Nb2O5, electrode10.1016/j.snb.2007.09.037 ↗
16. A La10Si5NbO27.5 based electrochemical sensor using nano-structured NiO sensing electrode for detection of NO210.1016/j.matlet.2013.07.032 ↗
17. Room temperature gas sensing of p-type TeO2 nanowires
18. Manipulating the gas–surface interaction between copper (II) oxide and mono-nitrogen oxides using temperature10.1016/j.snb.2016.01.104 ↗
19. Bipolar resistive switching in p-type Co3O4 nanosheets prepared by electrochemical deposition10.1186/1556-276X-8-36 ↗
20. Impedancemetric NOx sensing using YSZ electrolyte and YSZ/Cr2O3 composite electrodes10.1149/1.2430646 ↗
21. Size-dependent catalytic performance of CuO on γ-Al2O3: NO reduction versus NH3 oxidation10.1021/cs3002463 ↗
22. Catalytic activity of dispersed CuO phases towards nitrogen oxides (N2O, NO, and NO2)10.1016/j.apcatb.2005.09.001 ↗
23. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides10.1107/S0567739476001551 ↗
24. The electronic properties and lattice dynamics of (Na0.5Bi0.5)TiO3: from cubic to tetragonal and rhombohedral phases10.1063/1.4869733 ↗
25. Crystallisation of Cu-containing K-fluor-richterite (KNaCa(Mg,Cu)5Si8O22F2) glasses
26. Pyrochlore Pr2Zr2-xMxO7+δ (M=Al, Ga, In) solid-state electrolytes: defect-mediated oxygen hopping pathways and enhanced NO2 sensing properties10.1016/j.snb.2018.04.178 ↗
27. Influence of phase transitions and defect associates on the oxygen migration in the ion conductor Na1/2Bi1/2TiO310.1039/C6TA10566A ↗
28. Bismuth based oxide electrolytes-structure and ionic conductivity10.1016/S0955-2219(99)00009-6 ↗
29. An insitu Raman-spectroscopy study of the anodic-oxidation of copper in alkaline media10.1149/1.2069234 ↗
30. Bipolar resistive switching in p-type Co3O4 nanosheets prepared by electrochemical deposition10.1186/1556-276X-8-36 ↗
31. Impedance and Raman spectroscopic studies of (Na0.5Bi0.5)TiO310.1088/0022-3727/44/35/355402 ↗
32. Morphotropic Phase boundary in BNT-BZT solid solution: a study by Raman spectroscopy and electromechanical parameters
33. Dielectric and Raman spectroscopic studies of Na0.5Bi0.5TiO3-BaSnO3 ferroelectric system10.1111/jace.12838 ↗
34. X-ray absorption fine structure glasses containing Bi2O3, with third-order non-linearities10.1016/S0022-3093(97)00417-1 ↗
35. XPS characterization and E. Coli DNA degradation using functionalized Cu/TiO2 nanobiocatalysts10.1016/j.mcat.2018.02.010 ↗
36. Highly porous SnO2 fibers by electrospinning and oxygen plasma etching and its ethanol-sensing properties10.1016/j.snb.2009.10.012 ↗
37. Manganese-lanthanum oxides modified with silver for the catalytic combustion of methane10.1016/j.jcat.2004.07.022 ↗
38. Pyrochlore Pr2Zr1.95In0.05O7+δ oxygen conductors: defect-induced electron transport and enhanced NO2 sensing performances10.1016/j.electacta.2018.09.152 ↗
39. Mixed-potential type NOx sensor using stabilized zirconia and MoO3-In2O3 nanocomposites10.1016/j.ceramint.2016.03.243 ↗