Effect of high-temperature oxidation on Si3N4 containing Ti3AlC2
Source abstract
Abstract
Abstract In this work, a dense Si3N4-based composite was fabricated by spark plasma sintering the mixture of Si3N4 and Ti3AlC2. The nitrogen atoms of Si3N4 diffused into the TiCx lattice and leaded to the in-situ formation of TiC0.3N0.7 and SiC compounds. After annealing in air at 900 °C, TiC0.3N0.7 was oxidized to form rutile-TiO2 particles (about 3–4 μm). Meanwhile, it was found that the oxidized composite displayed superior mechanical and tribological properties, compared to Si3N4 and Si3N4-based composite before oxidation. Typically, the fracture toughness reached 9.97 MPa m1/2, which was 59.5% higher than that of Si3N4. In addition to cracks branch, bridge and deflection, the surface barrier of oxides was another major toughening mechanism. Besides, due to the pinning effect of TiC0.3N0.7, sliding-induced microcracks were completely suppressed, and the composite exhibited excellent friction and wear performances. In this case, the composite is expected to be fabricated into ceramic parts for service in high temperature environment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: MXene and MAX Phase Materials · Advanced ceramic materials synthesis · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. The path towards sustainable energy10.1038/nmat4834 ↗
2. Opportunities and challenges for a sustainable energy future10.1038/nature11475 ↗
3. Advanced engineering ceramics10.1002/1521-4095(20020517)14:10<709::AID-ADMA709>3.0.CO;2-9 ↗
4. Structural ceramic nanocomposites10.1016/S0955-2219(96)00222-1 ↗
5. A tough silicon nitride ceramic with high thermal conductivity10.1002/adma.201102462 ↗
6. Densification and mechanical properties of spark plasma sintered Si3N4/ZrO2 nano-composites10.1016/j.jallcom.2018.10.243 ↗
7. Enhanced thermal conductivity in Si3N4 ceramic by addition of a small amount of carbon10.1016/j.jeurceramsoc.2018.10.006 ↗
8. Room-temperature ductile inorganic semiconductor10.1038/s41563-018-0111-8 ↗
9. Lowering coefficient of friction in Cu alloys with stable gradient nanostructures10.1126/sciadv.1601942 ↗
10. Self-Lubricating Si3N4-based composites toughened by in situ formation of silver10.1016/j.ceramint.2018.05.040 ↗
11. Transfer, mixing and associated chemical and mechanical processes during the sliding of ductile materials10.1016/S0043-1648(00)00460-9 ↗
12. UHTC composites for hypersonic applications
13. Ablation-resistant carbide Zr0.8Ti0.2C0.74B0.26 for oxidizing environments up to 3,000 °C10.1038/ncomms15836 ↗
14. Dry sliding wear behavior of beta-Sialon ceramics at wide range temperature from 25 to 800 °C10.1016/j.jeurceramsoc.2017.07.016 ↗
15. Unlubricated sliding friction and wear of various Si3N4 pairs between 22 °C and 1000 °C10.1016/0301-679X(90)90016-I ↗
16. Electromagnetic wave absorption and mechanical properties of silicon carbide fibers reinforced silicon nitride matrix composites10.1016/j.jeurceramsoc.2018.12.038 ↗
17. Tribological behavior of alpha/beta-SiAlON-TiN composites10.1016/j.jeurceramsoc.2018.01.013 ↗
18. A novel method to prepare self-lubricity of Si3N4/Ag composite: microstructure, mechanical and tribological properties10.1111/jace.15569 ↗
19. Solid lubricants: a review10.1007/s10853-012-7038-2 ↗
20. Layered machinable ceramics for high temperature applications10.1016/S1359-6462(96)00418-6 ↗
21. Thermal and electrical properties of Nb2AlC, (Ti, Nb)2AlC and Ti2AlC10.1007/s11661-002-0262-7 ↗
22. Oxidation behavior of C/SiC-Ti3SiC2 at 800-1300 °C in air10.1016/j.jeurceramsoc.2016.03.029 ↗
23. Influence of Ti3AlC2 on corrosion resistance and microstructure of Al2O3-Ti3AlC2-C refractories in contact with ladle slag10.1016/j.jeurceramsoc.2015.12.037 ↗
24. Ambient and 550 °C tribological behavior of select MAX phases against Ni-based superalloys10.1016/j.wear.2007.03.011 ↗
25. Tribological behavior of select MAX phases against Al2O3 at elevated temperatures10.1016/j.wear.2007.11.018 ↗
26. Ti3SiC2-a self-lubricating ceramic10.1016/S0167-577X(02)00379-8 ↗
27. Tribological properties of Ti3SiC2 coupled with different counterfaces10.1016/j.ceramint.2015.01.150 ↗
28. High temperature tribological properties of Ti3AlC2 ceramic against SiC under different atmospheres10.1016/j.matdes.2014.11.043 ↗
29. Effect of counterface on the tribological behavior of Ti3AlC2 at ambient10.1007/s11249-013-0269-9 ↗
30. Thickness-independent capacitance of vertically aligned liquid-crystalline MXenes10.1038/s41586-018-0109-z ↗
31. 2D MXenes: a new family of promising catalysts for the hydrogen evolution reaction10.1021/acscatal.6b02754 ↗
32. A conceptual study into the potential of M(n+1)AX(n)-phase ceramics for self-healing of crack damage10.1016/j.jeurceramsoc.2014.08.046 ↗
33. Autonomous high-temperature healing of surface cracks in Al2O3 containing Ti2AlC particles10.1111/jace.15793 ↗
34. Temperature-driven wear behavior of Si3N4-based ceramic reinforced by in situ formed TiC0.3N0.7 particles10.1111/jace.16283 ↗
35. Fracture toughness determinations by indentation10.1111/j.1151-2916.1976.tb10991.x ↗
36. Development and characterisation of SiAlON composites with TiB2, TiN, TiC and TiCN10.1023/B:JMSC.0000026939.51639.05 ↗
37. Synthesis of ZrCx with controlled carbon stoichiometry by low temperature solid state reaction10.1016/j.jeurceramsoc.2019.03.004 ↗
38. 2D metal carbides and nitrides (MXenes) for energy storage10.1038/natrevmats.2016.98 ↗
39. Summary of constitutional data on the aluminum-carbon-titanium system10.1007/BF02647559 ↗
40. In situ high-temperature diffraction study of the thermal dissociation of Ti3AlC2 in vacuum10.1111/j.1551-2916.2010.03764.x ↗
41. Synthesis, properties and thermal decomposition of the Ta4AlC3 MAX phase10.1016/j.jeurceramsoc.2019.04.021 ↗
42. Effects of yttria and magnesia on densification and thermal conductivity of sintered reaction-bonded silicon nitrides10.1111/jace.16015 ↗
43. Oxidation characteristics of Ti3AlC2 over the temperature range 500-900 °C10.1016/j.matchemphys.2009.06.016 ↗
44. Microstructural evaluation and mechanical properties of in-situ WC/W-Cu composites fabricated by rGO/W-Cu spark plasma sintering reaction10.1016/j.matdes.2018.11.004 ↗
45. Enhanced fracture toughness of silicon nitride ceramics at cryogenic temperatures10.1016/j.scriptamat.2012.02.007 ↗
46. First-principles study, fabrication and characterization of (Zr0.25Nb0.25Ti0.25V0.25)C high-entropy ceramics10.1016/j.actamat.2019.03.021 ↗
47. Effect of alpha-/beta Si3N4-phase ratio and microstructure on the tribological behaviour up to 700 °C10.1016/S0043-1648(99)00367-1 ↗
48. Enhanced wear resistance of engineered glass-ceramic by nanostructured self-lubrication10.1016/j.matdes.2019.107623 ↗
49. Synthesis, characterization, and tribological evaluation of TiO2-reinforced boron and nitrogen co-doped reduced graphene oxide based hybrid nanomaterials as efficient antiwear lubricant additives10.1021/acsami.6b01876 ↗