Studies on the synthesis and sintering of nanocrystalline yttria
Source abstract
Abstract
Abstract Nanocrystalline yttria powders were synthesized from yttrium nitrate by the citrate gel-combustion technique. The auto-ignition of five different gels with fuel to oxidant (citric acid/nitrate) ratios 0.25, 0.5, 0.75, 1.0 and 1.1 was studied. All these mixtures yielded precursors which upon calcination in air at 1073 K yielded yttria. The bulk densities, specific surface area, X-ray crystallite size, size distribution of particles as well as the residual carbon present in these powders were determined. The influence of the fuel to oxidant ratio on the powder properties was analyzed. Scanning electron microscopy (SEM) showed that these powders were porous while the high resolution transmission electron microscopy (HRTEM) revealed that they consist of randomly oriented cuboidal nanocrystallites with an average crystallite size of 25±7 nm. These powders were compacted at 120 MPa without any lubricant or binder and their sinterability was studied. Pellets with a sintered density as high as 98–99% T.D. (theoretical density) could be obtained at a relatively low sintering temperature of 1673 K. Studies on the dependence of the properties of nanocrystalline yttria powders on the composition of the initial mixture used in the citrate gel-combustion as well as the sintering characteristics of these powders are being reported for the first time. Our investigations revealed that an initial mixture comprising equimolar quantities of the nitrate and citric acid yielded a powder with characteristics most suitable for fabricating yttria crucibles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Catalytic Processes in Materials Science · Thermal and Kinetic Analysis · Catalysis and Oxidation Reactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Fabrication, optical transmittance, and hardness of IR-transparent ceramics made from nanophase yttria10.1016/j.jeurceramsoc.2007.04.006 ↗
2. Fabrication of transparent yttria ceramics at low temperature using carbonate-derived powder10.1111/j.1151-2916.1998.tb02583.x ↗
3. Polycrystalline ceramic lasers10.1063/1.1662008 ↗
4. Synthesis of transparent Nd-doped HfO2–Y2O3 ceramics using HIP10.1111/j.1151-2916.1996.tb08129.x ↗
5. Fabrication of transparent polycrystalline yttria ceramics by combination of SPS and HIP10.1016/S1002-0721(07)60365-2 ↗
6. Synthesis of yttria nanopowders for transparent yttria ceramics10.1016/j.optmat.2005.09.003 ↗
7. The selective catalytic reduction of nitric oxide with methane over scandium oxide, yttrium oxide and lanthanum oxide10.1016/S0926-3373(98)00025-3 ↗
8. Coating powdered copper catalyst with yttria sol10.1016/j.matchemphys.2011.02.025 ↗
9. Yttria ceramics: cutting tool application10.1016/j.matlet.2003.11.010 ↗
10. Surface modification of Y2O3 nanoparticles10.1021/la701653v ↗
11. Interactions between TiAl alloys and yttria refractory material in casting process10.1016/j.jmatprotec.2010.03.003 ↗
12. Molten salt attack on t'yttria-stabilised zirconia by dissolution and precipitation10.1016/j.jeurceramsoc.2013.02.022 ↗
13. J. Sure, M. Mishra, M. Tarini, A.R. Shankar, N.G. Krishna, P. Kuppusami, C. Mallika, U. Kamachi Mudali, Microstructural characterization and chemical compatibility of pulsed laser deposited yttria coatings on high density graphite, Thin Solid Films 544, 2013, 218--223.10.1016/j.tsf.2013.03.116 ↗
14. High-density yttria for practical ceramic applications10.1111/j.1151-2916.1992.tb07863.x ↗
15. Coatings on graphite crucibles used in melting uranium10.1016/0040-6090(76)90649-0 ↗
16. Liquid uranium corrosion studies of protective yttria coatings on tantalum substrate10.1016/j.jnucmat.2010.12.307 ↗
17. Kinetics of interfacial reactions in molten U/solid Y2O3 system10.1016/S0022-3115(97)00366-8 ↗
18. The reaction of aluminum titanate crucibles with molten uranium10.1016/0022-3115(73)90013-5 ↗
19. Synthesis of thermal spray grade yttrium oxide powder and its application for plasma spray deposition10.1016/j.matchemphys.2007.06.027 ↗
20. High temperature liquid metal corrosion and high temperature electrical conductivity of Y2O310.1016/S0022-3115(97)00134-7 ↗
21. Microstructure development in mechanically alloyed yttria dispersed austenitic steels10.1016/j.actamat.2008.12.026 ↗
22. Effect of yttria particle size on the microstructure and compression creep properties of nanostructured oxide dispersion strengthened ferritic (Fe–12C–2W–0.5Y2O3) alloy10.1016/j.msea.2011.02.078 ↗
23. Effect of Y2O3 crucible on contamination of directionally solidified intermetallic Ti–46Al–8Nb alloy10.1016/j.intermet.2010.11.007 ↗
24. Size and structure evolution of yttria in ODS ferritic alloy powder during mechanical milling and subsequent annealing10.1016/j.powtec.2011.10.039 ↗
25. Fabrication and microstructure characterization of inert matrix fuel based on yttria stabilized zirconia10.1016/j.jnucmat.2004.11.004 ↗
26. Fracture toughness and mechanical strength of Y–TZP/PSZ ceramics10.1016/S1359-6462(01)01020-X ↗
27. Synthesis and characteristics of nanocrystalline YSZ by homogeneous precipitation and its electrical properties10.1016/j.jallcom.2006.01.047 ↗
28. Effect of characteristics of Y2O3 / ZrO2 powders on fabrication of anode-supported solid oxide fuel cells10.1016/S0378-7753(03)00350-1 ↗
29. Yttria coating synthesized by reactive flame spray process using Y–EDTA complex10.1016/j.surfcoat.2011.01.063 ↗
30. Synthesis and characterization of Y2O3 powders by a modified solvothermal process10.3740/MRSK.2012.22.2.78 ↗
31. Nanograined highly transparent yttria ceramics10.1364/OL.34.001033 ↗
32. Preparation of Y2O3 nano-phased powders by polyacrylamide gel method10.4028/www.scientific.net/AMR.92.189 ↗
33. Preparation and characterization of porous yttrium oxide powders with high specific surface area10.1016/S1002-0721(06)60061-6 ↗
34. Precipitation synthesis and sintering of yttria nanopowders10.1016/j.matlet.2004.02.008 ↗
35. Processing of yttria powders derived from hydroxide precursors10.1016/0272-8842(85)90009-4 ↗
36. Characteristics and sintering behavior of yttria powders synthesized by the combustion process10.1023/A:1006609523568 ↗
37. Synthesis of nanocrystalline yttria by microwave assisted citrate-gel decomposition technique10.1016/j.jmatprotec.2007.06.041 ↗
38. Microwave-flash combustion synthesis of yttria nanopowders
39. Microwave assisted combustion synthesis of nanocrystalline yttria and its powder characteristics10.1016/j.powtec.2008.10.019 ↗
40. Synthesis of nanocrystalline yttria through in-situ sulphated-combustion technique10.2109/jcersj2.117.1065 ↗
41. Combustion synthesis of Y2O3 and Yb–Y2O3 part 1. Nanopowders and their characterization10.1016/j.jmatprotec.2008.01.023 ↗
42. Sintering, microstructural and mechanical characterization of combustion synthesized Y2O3 and Yb+3–Y2O310.2109/jcersj2.117.1258 ↗
43. Nanostructured yttria powders via gel combustion10.1557/JMR.1999.0204 ↗
44. Alternative method to precipitation techniques for synthesizing yttrium oxide nanopowder10.1016/j.powtec.2007.02.045 ↗
45. Combustion synthesis of nanocrystalline yttria: tailoring of powder properties10.1016/j.mseb.2006.04.006 ↗
46. Synthesis of nanocrystalline yttria by sol–gel method10.1016/S0167-577X(00)00324-4 ↗
47. Ultrafine ceria powders via glycine-nitrate combustion10.1016/S0025-5408(01)00762-0 ↗
48. Combustion synthesis of urania–thoria solid solutions10.1016/S0022-3115(99)00267-6 ↗
49. Synthesis and sintering of nanocrystalline thoria doped with CaO and MgO derived through oxalate-deagglomeration10.1016/j.jnucmat.2012.11.040 ↗
50. Combustion synthesis of thoria – a feasibility study10.1016/S0022-3115(98)00688-6 ↗
51. Densification of nanocrystalline Y2O3 ceramic powder by spark plasma sintering10.1016/j.jeurceramsoc.2008.05.043 ↗