One-pot pyro-synthesis of a high energy density LiFePO 4 -Li 3 V 2 (PO 4 ) 3 nanocomposite cathode for lithium-ion battery applications
Source abstract
Abstract
Abstract A highly crystalline carbon-coated 0.66LiFePO4•0.33Li3V2(PO4)3 (LFP-LVP) nanocomposite was synthesized by a one-pot pyro-synthetic strategy using a polyol medium at low temperature. Prior to any additional heat treatment, electron microscopy confirmed the as-synthesized composite to consist of spherical particles with average diameters in the range of 30–60 nm. A crystal growth phenomenon and particle aggregation was observed upon heat treatment at 800 °C, thus resulting in an increase in the average particle size to 200–300 nm. When tested for a lithium-ion cell, the nanocomposite electrode demonstrated impressive electrochemical properties with higher operating potentials hence enhanced energy densities. Specifically, the composite cathode delivered a high reversible capacity of 156 mAh g−1 at 0.1 C and exhibited a remarkable reversible capacity of 119 mAh g−1, corresponding to an energy density of 46.88 Wh Kg−1 at 6.4 C. When cycling was performed at 6.4 C, the electrode could recover up to 85% of the capacity observed at low current density of 0.1 C, which indicates the excellent rate capability of the nanocomposite electrode. The enhanced performance was attributed to the inclusion of the high potential LVP phase constituent in the present cathode by a simple one-pot polyol-assisted pyro strategy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. LiFePO4 nanoparticles embedded in a nanoporous carbon matrix: superior cathode material for electrochemical energy-storage devices10.1002/adma.200802998 ↗
2. LiMnPO4 as the cathode for lithium batteries10.1149/1.1475195 ↗
3. Nanostructured composites: a high capacity fast rate Li3V2(PO4)3/carbon cathode for rechargeable lithium batteries10.1002/1521-4095(20021104)14:21<1525::AID-ADMA1525>3.0.CO;2-3 ↗
4. Cathode properties of phospho-olivine LiMPO4 for lithium secondary batteries
5. Effect of structure on the Fe3+/Fe2+redox couple in iron phosphates10.1149/1.1837649 ↗
6. Lithium ion rechargeable battery
7. ARC studies of the thermal stability of three different cathode materials: licoo2; Li[Ni0.1Co0.8Mn00.1]O2; and LiFePO4, in LiPF6 and LiBoB EC/DEC electrolytes10.1016/j.elecom.2003.10.011 ↗
8. Graphene oxide wrapped amorphous copper vanadium oxide with enhanced capacitive behavior for high-rate and long-life lithium-ion battery anodes10.1002/advs.201500154 ↗
9. Acetylene black induced heterogeneous growth of macroporous CoV2O6 nanosheet for high-rate pseudocapacitive lithium-ion battery anode10.1021/acsami.6b00596 ↗
10. Effect of cathode binder on capacity retention and cycle life in transition metal phosphate of a rechargeable lithium battery10.1016/S0013-4686(02)00808-3 ↗
11. Lithium metal phosphates, power and automotive applications10.1016/j.jpowsour.2008.08.024 ↗
12. Effects of Fe3+sources on structure and properties of LiFePO4/C prepared by carbon thermal reduction method
13. A comparative structural and electrochemical study of monoclinic Li3Fe2(PO4)3and Li3V2(PO4)310.1016/S0378-7753(03)00150-2 ↗
14. Studies of Li3V2(PO4)3 additives for the LiFePO4-based Li ion batteries10.1021/jp0758014 ↗
15. Improving electrochemical properties of lithium iron phosphate by addition of vanadium10.1016/j.jpowsour.2006.10.054 ↗
16. Pyro-synthesis of functional nanocrystals10.1038/srep00946 ↗
17. Suppressing Li3PO4 impurity formation in LiFePO4/Fe2P by a nonstoichiometry synthesis and its effect on electrochemical properties.10.1016/j.matlet.2011.01.074 ↗
18. Impurities in LiFePO4 and their influence on material characteristics10.1149/1.2919105 ↗
19. High voltage LiMnPO4-LiMn2O4 nanocomposite cathode by a one-pot pyro synthesis for Li-ion batteries10.1039/c3ra44415e ↗
20. Li3V2(PO4)3cathode materials for lithium-ion batteries: a review10.1016/j.jpowsour.2014.01.126 ↗
21. Significantly improved electrochemical performance in Li3V2(PO4)3/C promoted by SiO2 coating for lithium-ion batteries10.1021/jp301127r ↗
22. Synthesis of Li3V2(PO4)3 cathode material via a fast sol-gel method based on spontaneous chemical reactions10.1016/j.jpowsour.2011.11.051 ↗
23. Solvothermal synthesis of Fe-doping LiMnPO4 nanomaterials for Li-ion batteries10.1016/j.jpowsour.2013.09.048 ↗
24. Synthesis and electrochemical performances of (1-x)LiMnPO4·xLi3V2(PO4)3/C composite cathode materials for lithium ion batteries10.1016/j.jpowsour.2013.03.063 ↗