Intrinsic permeability of refractories from gas permeability measurements: Comparison of results
Source abstract
Abstract
Abstract The gas permeability of porous materials largely depends on pressure, with the intrinsic permeability typically being determined using Klinkenberg's model, which is valid when the gas flows under viscous conditions. However, measurements performed on refractories with the outlet at atmospheric pressure often reveal inertial effects. Therefore, gas permeability is assumed to be flow-rate dependent; an alternative approach is proposed to determine the intrinsic properties using the Forchheimer number. A gas permeameter has been developed to improve measurement accuracy. It allows for the conduction of a test in viscous flow conditions or with inertial effects. The improved gas permeameter was used to compare the different approaches to the evaluation of the intrinsic permeability of four refractory materials with permeabilities ranging from 0.03 to 6 darcies. Combining a modified pressure drop method with Klinkenberg's model proved to be a reliable method for consistently evaluating refractory material permeability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Groundwater flow and contamination studies · Granular flow and fluidized beds · Drilling and Well Engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Dynamic permeability behavior during drying of refractory castables based on calcium-free alumina binders10.1111/j.1151-2916.2001.tb00644.x ↗
2. Pore pressure and drying of concrete at high temperature10.1061/JMCEA3.0002404 ↗
3. da Luz · 2015
4. A review: influence of refractories on steel quality10.1051/metal/2015028 ↗
5. Andalusite: an amazing refractory raw material with excellent corrosion resistance to sodium vapours10.1016/j.ceramint.2011.03.024 ↗
6. The effect of the addition of fine andalusite particles in refractory bricks on gaseous corrosion10.1007/s11837-008-0061-8 ↗
7. Melt corrosion of oxide and oxide-carbon refractories10.1179/095066099101528234 ↗
8. Theory, experiment and practice of slag attack of refractories
9. Fluid transport and deformation
10. Surface energy and capillarity
11. H. Darcy, Les fontaines publiques de la ville de Dijon (Éd. 1856), 1856.
12. J.A. Rushing, K.E. Newsham, P.M. Lasswell, J.C. Cox, T.A. Blasingame, Klinkenerg-corrected permeability measurements in tight gas sands: steady-state versus unsteady-state techniques, in: Proceedings of the SPE Annual Technical Conference and Exhibition, Society of Petroleum Engineers, 2004.10.2523/89867-MS ↗
13. Y. Jannot, D. Lasseux, L. Delottier, G. Hamon, A simultaneous determination of permeability and Klinkenberg coefficient from an unsteady-state pluse-decay experiment, in: Proceedings of the International Symposium of the Society of Core Analysts, Society of Core Analysts, Paper SCA2008-09, 2008, pp. 1–12.
14. ASTM C577-7, Standard Test Method for Permeability of Refractories, 2007.
15. ISO 8884, Dense, Shaped Refractory Products – Determination of Permeability to Gases, 1991.
16. Wasserbewegung durch boden
17. Klinkenberg · 1941 · 200
18. Knudsen's permeability correction for tight porous media10.1007/s11242-011-9842-6 ↗
19. Interpretation of steady linear visco-inertial gas flow data10.2118/68-01-06 ↗
20. Gas flow in porous media with Klinkenberg effects10.1023/A:1006535211684 ↗
21. How accurate is Darcy's law for refractories
22. Influence of air compressibility on the permeability evaluation of refractory castables10.1111/j.1151-2916.2000.tb01426.x ↗
23. Permeability of porous ceramics considering the Klinkenberg and inertial effects10.1111/j.1151-2916.2001.tb00772.x ↗
24. Klinkenberg permeability measurements: problems and practical solutions
25. Permeability of blast-furnace refractories10.1111/j.1151-2916.1959.tb13557.x ↗
26. E. Mayer, Oxide-Ceramic Products for High-Temperature Technology, Technical Paper, 2013.