journal article·2018-05

Influence of solution-precursor plasma spray (SPPS) processing parameters on the mechanical and thermodynamic properties of 8 YSZ

Matiullah Khan, Ningning Hu, Lan Zhenhua, Yongzhe Wang, Zeng Yi

Ceramics International· Volume 44· Issue 7
Publisher page

Abstract

Abstract 8 mol% yttria stabilized zirconia (8YSZ) coatings are prepared by solution precursor plasma spray (SPPS) technique under different spray conditions. Phase analysis is performed using X-ray diffraction (XRD) and Electron back scattered diffraction (EBSD) techniques. Irrespective of the processing conditions and the heat treatment temperatures, all samples displayed cubic and tetragonal zirconia phases. Vertical and horizontal cracks appeared in the microstructural analysis of the coatings. Coating prepared under spray conditions having 40 mm distance between the spray gun and the sample exhibit high hardness, both at 0 h and 10 h heat treatment holding time. To explore the suitability of the coatings for the heat insulating applications, the thermal diffusivity and thermal conductivity are calculated. The coating with 42 mm distance between the spray gun and the sample displayed lowest thermal conductivity from 400 to 1200 ℃.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. A study of damage evolution in high purity nano TBCs during thermal cycling: a fracture mechanics based modelling approach10.1016/j.jeurceramsoc.2017.02.054 ↗
2. High temperature oxidation and insulation behavior of plasma-sprayed nanostructured thermal barrier coatings10.1016/j.jallcom.2017.02.073 ↗
3. Hybrid plasma-sprayed thermal barrier coatings using powder and solution precursor feedstock10.1007/s11666-014-0075-4 ↗
4. Yttria-stabilized zirconia–alumina composite sintering temperature effect on thermal diffusivity10.1007/s10973-016-5788-9 ↗
5. Carbon nanotubes stabilize high temperature phase and toughen Al2O3 -based thermal barrier coatings10.1016/j.compositesb.2017.05.032 ↗
6. Mechanisms of spallation of solution precursor plasma spray thermal barrier coatings10.1016/j.surfcoat.2004.08.004 ↗
7. Low thermal conductivity yttria-stabilized zirconia thermal barrier coatings using the solution precursor plasma spray process10.1007/s11666-014-0082-5 ↗
8. Stabilized zirconia as a structural ceramic: an overview10.1016/j.dental.2007.05.005 ↗
9. Synthesis and thermal stability of zirconia and yttria-stabilized zirconia microspheres10.1016/j.jcis.2015.02.049 ↗
10. Thermal barrier coating materials10.1016/S1369-7021(05)70934-2 ↗
11. Formation of vertical cracks in solution-precursor plasma-sprayed thermal barrier coatings10.1016/j.surfcoat.2006.01.020 ↗
12. Suspension and solution plasma or HVOF spraying10.1007/s11666-008-9160-x ↗
13. Processing parameter effects on solution precursor plasma spray process spray patterns10.1016/j.surfcoat.2003.09.071 ↗
14. Thermal barrier coatings made by the solution precursor plasma spray process10.1007/s11666-007-9141-5 ↗
15. Microstructural characterization of spray-dried NiO-8YSZ particles as plasma sprayable anode materials for metal-supported solid oxide fuel cell10.1016/j.ceramint.2017.03.077 ↗
16. Synthesis of nanocrystalline 8YSZ powder for sintering SOFC material using green solvents and dendrimer route10.1016/j.apt.2016.06.010 ↗
17. Thermal cycling behavior of nanostructured 8YSZ,SZ/8YSZ and 8CSZ/8YSZ thermal barrier coatings fabricated by atmospheric plasma spraying10.1016/j.ceramint.2016.12.014 ↗
18. Effect of microstructure on the thermal conductivity of plasma sprayed Y2O3 stabilized zirconia (8% YSZ)10.3390/coatings7110198 ↗
19. Thermal stability of air plasma spray and solution precursor plasma spray thermal barrier coatings10.1111/j.1551-2916.2007.01864.x ↗
20. Low thermal conductivity thermal barrier coating deposited by the solution plasma spray process10.1016/j.surfcoat.2006.08.095 ↗