Calcium niobate based piezo-resistive materials for high temperature sensor application
Source abstract
Abstract
Abstract A2B2O7 (A= Ca2+, Sr2+, B = Nb5+) based perovskite layered structure (PLS) materials are well known for high piezo-resistive properties. These materials display linear behaviour of electric resistance over wide range of temperature ranging from room temperature (RT) to 1000 °C or more, therefore, are promising candidates for high temperature sensor applications. In the present study, the following compositions were prepared by solid state reaction method: (i) pure calcium niobate (CNO) (Ca2Nb2O7), (ii) CNO + 0.03 mol% of tungsten trioxide (WO3), (iii) CNO + 0.03 mol% of cerium dioxide (CeO2) and (iv) CNO + 0.03 mol% of neodymium (III) oxide (Nd2O3). The synthesized powders were calcined at 1250 °C for 2 h and were sintered in the temperatures range of 1350–1450 °C. The weight loss observed on samples sintered beyond 1350 °C is due to loss of both CaO and Nb2O5 formed on decomposition of CNO at high temperature. The samples were characterized for phase analysis by x-ray diffraction (XRD), micro-structural investigation by scanning electron microscope (SEM) and electrical resistivity (ρ). The electrical resistivity found decreased linearly from 1014 Ω.cm at RT to 107 Ω.cm at 900 °C for all the samples. This indicates that pure and doped calcium niobate materials are very good candidates for high temperature sensor applications. Piezoresistive property of these samples was established by measuring the change in electrical resistance with application of static compressive force and was found nonlinear. The addition of dopants has increased the resistivity and ferroelectric properties whereas decreased the piezo-resistive properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Acoustic Wave Resonator Technologies · Microwave Dielectric Ceramics Synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Boyce · 2006
2. Gong · 2012
3. G.W. Tregay, P.R. Calabrese, P.L. Kaplin, M.J. Finney, Optical fiber sensor for temperature measurement from 600 to 1900 °C in gas turbine engines,Proc. SPIE-Int. Soc. Opt. Eng., 1589, 1991, pp. 38--47.10.1117/12.50982 ↗
4. T. Tomoki, S. Koji, O. Yoshihiko, N. Atsushi,Temperature measurement of high speed rotating turbine blades using a pyrometer,Proceedings ASME Turbo Expo: Power Land, Sea, Air,2, 2006, pp. 521–529.10.1115/GT2006-90247 ↗
5. S.S. Lutz, W.D. Turley, H.M. Borella, B.W. Noel, M.R. Cates, M.R. Probert, Remote temperature measurement instrumentation for a heated rotating turbine disk, Proceedings International Instrum. Symp., 34, 1988, pp. 217–229.
6. Characterization of Yb2O3 based optical temperature sensor for high temperature applications10.1016/j.sna.2006.05.036 ↗
7. Piezoelectric materials for high temperature sensors10.1111/j.1551-2916.2011.04792.x ↗
8. Crystallographic and dielectric properties of ferroelectric A2B2O7 (A = Sr, B = Ta, Nb) crystals and solid solutions10.1143/JPSJ.38.817 ↗
9. Piezoelectric strontium niobate and calcium niobate ceramics with super-high curie points10.1111/j.1551-2916.2009.03587.x ↗
10. McColm · 2013
11. Hysteresis compensation of piezoresistive carbon nanotube/polydimethylsiloxane composite-based force sensors10.3390/s17020229 ↗
12. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides10.1107/S0567739476001551 ↗