Enhanced thermoelectric performance of BiCuTeO by excess Bi additions
Source abstract
Abstract
Abstract Thermoelectric (TE) devices used to convert waste heat directly into electricity are highly desirable for alleviating the prevailing energy crisis and global climate-change issues. Among the various TE materials available, metal oxides exhibit high thermal and chemical stabilities in air, and are hence, preferred for use in many TE applications. However, most of them possess TE figures of merit (ZT) that are below the applicable value of 2, in the mid-temperature region (from 250 to 600 °C). In a previous work, the removal of a small amount of Bi from BiCuSeO was found to improve the ZT of BiCuSeO. In this work, we pursue another track and study the TE performance of BiCuTeO after the addition of up to 6% excess Bi. Bi1+xCuTeO (x = 0.00–0.06) samples were prepared by solid-state reactions, followed by hot-pressing to form pellets. By adding a stoichiometric excess of Bi into BiCuTeO, 16% enhancement in power factor was achieved at 450 °C. This enhancement can be attributed to the increase in the Seebeck coefficient because of the appearance of secondary phases. Detailed characterizations and discussions of the effect of the nominal excess Bi in BiCuTeO are presented in this paper. The findings of this study can be applied in the investigation of novel high-performance TE materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies · Advanced Thermodynamics and Statistical Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. A high thermoelectric figure of merit ZT > 1 in Ba heavily doped BiCuSeO oxyselenides10.1039/c2ee22622g ↗
2. Manipulation of solubility and interstitial defects for improving thermoelectric SnTe alloys10.1021/acsenergylett.8b01098 ↗
3. Complex thermoelectric materials10.1038/nmat2090 ↗
4. High-performance bulk thermoelectrics with all-scale hierarchical architectures10.1038/nature11439 ↗
5. Facile preparation and thermoelectric properties of Bi2Te3 based alloy nanosheet/PEDOT:PSS composite films10.1021/am5002772 ↗
6. Influence of substituting Sn for Sb on the thermoelectric transport properties of CoSb3-based skutterudites10.1063/1.4867609 ↗
7. Synthesis and thermoelectric properties of the YbTe-YbSb system10.1007/s11664-015-4202-x ↗
8. Recent advances in nanostructured thermoelectric half-Heusler compounds10.3390/nano2040379 ↗
9. Ultralow thermal conductivity and high thermoelectric figure of merit in SnSe crystals10.1038/nature13184 ↗
10. The oxidation states of elements in pure and Ca-doped BiCuSeO thermoelectric oxides10.1016/j.actamat.2015.08.079 ↗
11. Enhanced low temperature thermoelectric performance of Ag-doped BiCuSeO10.1063/1.4894258 ↗
12. High-temperature thermoelectric properties of Ca3Co4O9+δ with Eu substitution10.1016/j.ssc.2003.11.045 ↗
13. High-performance nanostructured thermoelectric materials10.1038/asiamat.2010.138 ↗
14. Metal oxides for thermoelectric power generation and beyond10.1007/s42114-017-0011-4 ↗
15. Enhancement of the thermoelectric performances of In2O3 by the coupled substitution of M2+/Sn4+ for In3+10.1063/1.2986148 ↗
16. Thermoelectric properties of layered oxyselenides La1−xSrxCuOSe (x=0 to 0.2)10.1063/1.1646438 ↗
17. An oxide single crystal with high thermoelectric performance in air10.1143/JJAP.39.L1127 ↗
18. Doping effect of La and Dy on the thermoelectric properties of SrTiO310.1111/j.1551-2916.2010.04185.x ↗
19. Recent aspects of oxide thermoelectric materials for power generation from mid-to-high temperature heat source10.2109/jcersj2.119.770 ↗
20. Synergistically optimizing electrical and thermal transport properties of BiCuSeO via a dual-doping approach10.1002/aenm.201502423 ↗
21. High pressure synthesis, structure and thermoelectric properties of BiCuChO (Ch = S, Se, Te)10.1016/j.jeurceramsoc.2016.10.021 ↗
22. Electronic structures and thermoelectric properties of layered BiCuOCh oxychalcogenides (Ch = S, Se and Te): first-principles calculations10.1039/c3ta11222e ↗
23. Layered oxychalcogenides: structural chemistry and thermoelectric properties10.1016/j.jmat.2016.04.002 ↗
24. Enhanced thermoelectric performance of Ca-doped BiCuSeO in a wide temperature range10.1039/c3ta11806a ↗
25. Crystal structures, optoelectronic properties, and electronic structures of layered oxychalcogenides MCuOCh (M = Bi, La; Ch = S, Se, Te): effects of electronic configurations of M3+ Ions10.1021/cm702303r ↗
26. Optoelectronic structure and related transport properties of BiCuSeO-based oxychalcogenides: first principle calculations10.1016/j.solidstatesciences.2016.05.012 ↗
27. A copper-containing oxytelluride as a promising thermoelectric material for waste heat recovery10.1039/C2TA00878E ↗
28. Low effective mass leading to high thermoelectric performance10.1039/c2ee21536e ↗
29. Oxidation states and thermoelectric properties of BiCuSeO bulks fabricated under Bi or Se deficiencies in the nominal composition10.1063/1.5034499 ↗
30. On the crystal structure of monoclinic a-Bi2O310.1524/zkri.1941.103.1.274 ↗
31. The effect of crystallite size on thermoelectric properties of bulk nanostructured magnesium silicide (Mg2Si) compounds10.1063/1.3684615 ↗
32. Pushing the optimal ZT values of p-type Bi2-xSbxTe3 alloys to a higher temperature by expanding band gaps and suppressing intrinsic excitation10.1007/s10854-016-4920-8 ↗
33. Controllable synthesis and electrical conductivities of Cu7Te4 nanostructures10.3724/SP.J.1077.2012.00433 ↗
34. Influence of the phase transformation in NaxCoO2 ceramics on thermoelectric properties10.1016/j.ceramint.2018.06.183 ↗
35. Investigation of the bipolar effect in the thermoelectric material CaMg2Bi2 using a first-principles study10.1039/C6CP02057G ↗
36. Bulk nanostructured thermoelectric materials: current research and future prospects10.1039/b822664b ↗
37. Estimation of the thermal band gap of a semiconductor from seebeck measurements10.1007/s11664-999-0211-y ↗
38. Facile electrochemical deposition of Cu7Te4 thin films with visible-light driven photocatalytic activity and thermoelectric performance10.1039/C6RA00345A ↗
39. Compromise and synergy in high-efficiency thermoelectric materials10.1002/adma.201605884 ↗
40. Phase equilibria in the Cu-Te system10.1023/A:1024003932461 ↗