journal article·2019-08

CNT sponges with outstanding absorption capacity and electrical properties: Impact of the CVD parameters on the product structure

Claudir Gabriel Kaufmann Junior, Rúbia Young Sun Zampiva, Janio Venturini, Leonardo Moreira dos Santos, Cibele Florence, Eduardo da Silva Fernandes, Sergio Roberto Mortari, Carlos Pérez Bergmann, Carla Schwengber ten Caten, Annelise Kopp Alves

Ceramics International· Volume 45· Issue 11
Publisher page

Abstract

Abstract This work presents a detailed study of the influence of the synthesis parameters on the nanopowder-catalyzed CNT sponge production. Through electrochemical and absorption analyses, the sponges indicated a low resistivity (4.8x10−3 Ω m), capacitive behavior, very good cyclability and an elevated capacity of absorption of non-polar fluids (∼16 g/g). The polar character of the structure was easily modified by acid treatment allowing its further application in polar solutions. The produced sponge could be a practical tool for the recovery of water sources contaminated by non-polar substances. Additionally, it is a promising electrode in electrochemical processes with both polar and non-polar electrolytes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Supercapacitor Materials and Fabrication · Carbon Nanotubes in Composites · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. Mechanical properties of nanocomposites reinforced by carbon nanotube sponges
2. Compacting CNT sponge to achieve larger electromagnetic interference shielding performance10.1016/j.matdes.2018.02.047 ↗
3. Fabrication and toughening behavior of carbon nanotube (CNT) scaffold reinforced SiBCN ceramic composites with high CNT loading10.1016/j.ceramint.2017.04.046 ↗
4. Investigating nanohybrid material based on 3D CNTs@Cu nanoparticle composite and imprinted polymer for highly selective detection of chloramphenicol10.1016/j.jhazmat.2017.08.014 ↗
5. Carbon sponge-type nanostructures based on coaxial nitrogen-doped multiwalled carbon nanotubes grown by CVD using benzylamine as precursor10.1016/j.carbon.2017.01.010 ↗
6. Carbon nanotube sponges10.1002/adma.200902986 ↗
7. Covalently bonded three-dimensional carbon nanotube solids via boron induced nanojunctions10.1038/srep00363 ↗
8. Effects of carbonaceous impurities on the electrochemical activity of multiwalled carbon nanotube electrodes for vanadium redox flow batteries10.1016/j.carbon.2018.01.069 ↗
9. Synthesis of ordered mesoporous TiO 2 -Carbon-CNTs nanocomposite and its efficient photoelectrocatalytic methanol oxidation performance10.1016/j.micromeso.2016.10.049 ↗
10. Macropore- and micropore-dominated carbon derived from poly(vinyl alcohol) and polyvinylpyrrolidone for supercapacitor and capacitive deionization10.1021/acssuschemeng.7b02307 ↗
11. Electrochemistry at carbon nanotube electrodes: is the nanotube tip more active than the sidewall?10.1002/anie.200801744 ↗
12. Recyclable carbon nanotube sponges for oil absorption10.1016/j.actamat.2011.04.022 ↗
13. Silica decorated CNTs sponge for selective removal of toxic contaminants and oil spills from water10.1016/j.jece.2015.02.026 ↗
14. Three-dimensional porous carbon nanotube sponges for high-performance anodes of microbial fuel cells10.1016/j.jpowsour.2015.08.021 ↗
15. 3D macroporous solids from chemically cross-linked carbon nanotubes10.1002/smll.201402127 ↗
16. Synthesis and characterization of 3D double branched K junction carbon nanotubes and nanorods10.1016/j.carbon.2006.09.029 ↗
17. Enhancing charge density and steering charge unidirectional flow in 2D non-metallic semiconductor-CNTs-metal coupled photocatalyst for solar energy conversion10.1016/j.apcatb.2016.09.013 ↗
18. Vertically aligned CNT arrays: structural integrity and surface properties10.1108/IJSI-10-2015-0046 ↗
19. A flexible and stackable 3D interconnect system using growth-engineered carbon nanotube scaffolds10.1088/2058-8585/aa6a82 ↗
20. Carbon nanotubes for energy applications
21. Role of polymers in the design of 3D carbon nanotube-based scaffolds for biomedical applications10.1016/j.progpolymsci.2014.02.004 ↗
22. An efficient electrochemical performance of Fe2O3/CNT nanocomposite coated dried Lagenaria siceraria shell electrode for electrochemical capacitor10.1016/j.ceramint.2018.03.154 ↗
23. 3D CNT macrostructure synthesis catalyzed by MgFe 2 O 4 nanoparticles—a study of surface area and spinel inversion influence10.1016/j.apsusc.2017.06.020 ↗
24. Gujarati · Basic Econometrics · 2004
25. Joseph · 2009
26. Wooldridge · 2012
27. Purity assessment of multiwalled carbon nanotubes by Raman spectroscopy10.1063/1.2712152 ↗
28. Double resonance Raman spectroscopy of single-wall carbon nanotubes10.1088/1367-2630/5/1/157 ↗
29. Graphitization mechanism during the carbon-nanotube formation based on the in-situ HRTEM observation10.1021/jp012677u ↗
30. High performance for electric double-layer capacitors based on CNT–CG composite synthesized as additive material by CVD method10.1016/j.jiec.2017.06.023 ↗
31. Full factorial design approach to carbon nanotubes synthesis by CVD method in argon environment
32. Influence of synthesis parameters on CCVD growth of vertically aligned carbon nanotubes over aluminum substrate10.1038/s41598-017-10055-0 ↗
33. Carbon nanotubes synthesis by the ethylene chemical catalytic vapour deposition (CCVD) process on Fe, Co, and Fe-Co/Al2O3sol-gel catalysts10.1016/j.apcata.2006.10.042 ↗
34. Jorio · 2008
35. Is there a correlation between catalyst particle size and CNT diameter?10.1016/j.carbon.2009.03.046 ↗
36. Spinnable carbon nanotube forests grown on thin, flexible metallic substrates10.1016/j.carbon.2010.06.016 ↗
37. Hydrogen-free spray pyrolysis chemical vapor deposition method for the carbon nanotube growth: parametric studies10.1016/j.apsusc.2011.03.011 ↗
38. Carbon nanotubes growth on expanded perlite particles via CVD method: the influence of the substrate morphology10.1016/j.cej.2016.01.112 ↗
39. Catalytic activity of Fe, Co and Fe-Co-MCM-41 for the growth of carbon nanotubes by chemical vapour deposition method10.1016/j.apsusc.2008.03.069 ↗
40. Syntheses of CNTs over several iron-supported catalysts: influence of the metallic precursors10.1016/j.cattod.2004.06.036 ↗
41. Fabrication of nanostructured clay–carbon nanotube hybrid nanofiller by chemical vapour deposition10.1016/j.apsusc.2012.01.006 ↗
42. Coefficients of determination in logistic regression models - a new proposal: the coefficient of discrimination10.1198/tast.2009.08210 ↗
43. Magnesium ferrite (MgFe2O4) nanostructures fabricated by electrospinning10.1007/s11671-008-9229-y ↗
44. Attestation in self-propagating combustion approach of spinel AFe2O4(A = Co, Mg and Mn) complexes bearing mixed oxidation states: magnetostructural properties10.1016/j.apsusc.2016.04.177 ↗
45. Novel interlayer made from Fe3C/carbon nanofiber webs for high performance lithium-sulfur batteries10.1016/j.jpowsour.2015.02.140 ↗
46. Hollow spheres of iron carbide nanoparticles encased in graphitic layers as oxygen reduction catalysts10.1002/anie.201400358 ↗
47. M 3 C (M: Fe, Co, Ni) nanocrystals encased in graphene nanoribbons: an active and stable bifunctional electrocatalyst for oxygen reduction and hydrogen evolution reactions10.1021/acsnano.5b02420 ↗
48. Electrical conductivity of metal-carbon nanotube structures: effect of length and doping10.1007/s12034-014-0043-0 ↗
49. Directly grown carbon nanotube based hybrid electrodes with enhanced thermo-cell performances10.1039/C7RA02264F ↗
50. Carbon nanotubes: properties and application10.1016/j.mser.2003.10.001 ↗
51. Mechanical properties of carbon nanotubes10.1007/s003390050999 ↗
52. Thinking small: progress on microscale neurostimulation technology10.1111/ner.12716 ↗
53. Mechanically strong and highly conductive graphene aerogel and its use as electrodes for electrochemical power sources10.1039/c1jm10239g ↗
54. Of porous surfaces10.1039/tf9444000546 ↗
55. Y.Y · 2009
56. Polymer electrolyte based on DNA and N,N,N-trimethyl-N-(2-hydroxyethyl)ammonium bis(trifluoromethylsulfonyl)imide10.1016/j.jelechem.2015.04.019 ↗
57. The dielectric properties of solutions of electrolytes in a non-polar solvent10.1073/pnas.19.11.939 ↗
58. Solvent activity in electrolyte solutions controls electrochemical reactions in Li-ion and Li-sulfur batteries10.1021/jp5128578 ↗
59. Measurement of functionalised carbon nanotube carboxylic acid groups using a simple chemical process10.1016/j.carbon.2005.11.010 ↗
60. Functionalization of carbon nanotube yarn by acid treatment10.1080/19475411.2014.896426 ↗
61. Effect of defects controlled by preparation condition and heat treatment on the ferromagnetic properties of few-layer graphene10.1038/s41598-017-06224-w ↗
62. Oxygen functional groups and electrochemical capacitive behavior of incompletely reduced graphene oxides as a thin-film electrode of supercapacitor10.1016/j.electacta.2013.11.040 ↗
63. Improving the electrochemical performances of active carbon-based supercapacitors through the combination of introducing functional groups and using redox additive electrolyte10.1016/j.jscs.2018.02.001 ↗
64. Superhydrophobic silanized melamine sponges as high efficiency oil absorbent materials10.1021/am503503m ↗
65. M · 2015
66. M.A · 2011
67. Pharmaceutical characterization of solid and dispersed carbon nanotubes as nanoexcipients
68. Electrical properties of carbon nanotubes synthesis by double furnace thermal-CVD technique at different temperatures on porous silicon template10.1088/1757-899X/46/1/012023 ↗