journal article·2019-08

Realizing n-type BiCuSeO through halogens doping

Xiaoxuan Zhang, Dongyang Wang, Guangtao Wang, Li-Dong Zhao

Ceramics International· Volume 45· Issue 12
Publisher page

Abstract

Abstract Since the p-type BiCuSeO has been well developed in 2010, the maximum ZT value > 1.5 was achieved. Recently, the extensive research on n-type BiCuSeO is of interest to match its p-type counterpart. In this work, we found that n-type BiCuSeO can be successfully obtained in Bi1.04Cu1.05Se0.99X0.01O by using halogens (X = Cl, Br, I) doping. The first-principle calculations on the electronic band structure of BiCuSeO show that the Fermi levels were shifted into the conduction band by halogens doping at Se site. Both electrical transport properties and Hall measurements indicate that halogens are effective electron-dopants to realize n-type BiCuSeO. Interestingly, the results of temperature-dependent Seebeck coefficients elucidate a p-n-p type transport behavior, which experience less and less pronounced with increasing heating-cooling measurement cycles until n-type transports disappeared. Our results indicate that even though a large negative Seebeck coefficient (– 500 μV/K) can be realized in n-type BiCuSeO, but these n-type behaviors are reversible and unstable due to the fragile bonding in Cu-X (X = Cl, Br, I), and thus halogens losing upon several measurement cycles for heating and cooling. Even though our results indicate that the obtained n-type BiCuSeO is not stable through halogens doping, the calculated projected density of states elucidate that a high-performance n-type BiCuSeO can be expected by electron-doping at Bi sites.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Electronic and Structural Properties of Oxides · Advanced Condensed Matter Physics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. BiCuSeO oxyselenides: new promising thermoelectric materials10.1039/C4EE00997E ↗
2. Ultralow thermal conductivity and high thermoelectric figure of merit in SnSe crystals10.1038/nature13184 ↗
3. Ultrahigh power factor and thermoelectric performance in hole-doped single-crystal SnSe10.1126/science.aad3749 ↗
4. 3D charge and 2D phonon transports leading to high out-of-plane ZT in n-type SnSe crystals10.1126/science.aaq1479 ↗
5. SnSe: a remarkable new thermoelectric material10.1039/C6EE01755J ↗
6. Morphology control of nanostructures: Na-doped PbTe–PbS system10.1021/nl303449x ↗
7. Strong enhancement of phonon scattering through nanoscale grains in lead sulfide thermoelectrics10.1038/am.2014.39 ↗
8. Realizing high figure of merit in phase-separated polycrystalline Sn1–xPbxSe10.1021/jacs.6b07010 ↗
9. Promising thermoelectric bulk materials with 2D structures10.1002/adma.201702676 ↗
10. Simultaneously enhancing the power factor and reducing the thermal conductivity of SnTe via introducing its analogues10.1039/C7EE02530K ↗
11. Realizing high performance n-type PbTe by synergistically optimizing effective mass and carrier mobility and suppressing bipolar thermal conductivity10.1039/C8EE01151F ↗
12. Approaching topological insulating states leads to high thermoelectric performance in n-type PbTe10.1021/jacs.8b09029 ↗
13. Enhancing thermoelectric performance of SnTe via stepwisely optimizing electrical and thermal transport properties10.1016/j.jallcom.2018.09.234 ↗
14. Convergence of electronic bands for high performance bulk thermoelectrics10.1038/nature09996 ↗
15. Recent advances in high-performance bulk thermoelectric materials10.1080/09506608.2016.1183075 ↗
16. Rationally designing high-performance bulk thermoelectric materials10.1021/acs.chemrev.6b00255 ↗
17. Routes for high-performance thermoelectric materials10.1016/j.mattod.2018.03.039 ↗
18. High-performance nanostructured thermoelectric materials10.1038/asiamat.2010.138 ↗
19. New insights into intrinsic point defects in V2VI3 thermoelectric materials10.1002/advs.201600004 ↗
20. High performance bulk thermoelectrics via a panoscopic approach10.1016/j.mattod.2013.05.004 ↗
21. Multi-Scale microstructural thermoelectric materials: transport behavior, non-equilibrium preparation, and applications10.1002/adma.201602013 ↗
22. Bi1-xSrxCuSeO oxyselenides as promising thermoelectric materials10.1063/1.3485050 ↗
23. Strong phonon scattering by layer structured PbSnS2 in PbTe based thermoelectric materials10.1002/adma.201201565 ↗
24. Polycrystalline BiCuSeO oxide as a potential thermoelectric material10.1039/c2ee21274a ↗
25. Thermal stability and oxidation resistance of BiCuSeO based thermoelectric ceramics10.1016/j.jallcom.2014.06.117 ↗
26. BiCuSeO thermoelectrics: an update on recent progress and perspective10.3390/ma10020198 ↗
27. Enhancing thermoelectric performance in hierarchically structured BiCuSeO by increasing bond covalency and weakening carrier–phonon coupling10.1039/C7EE00464H ↗
28. Investigation into the extremely low thermal conductivity in Ba heavily doped BiCuSeO10.1016/j.nanoen.2016.07.003 ↗
29. Texturation boosts the thermoelectric performance of BiCuSeO oxyselenides10.1039/c3ee41859f ↗
30. High thermoelectric performance realized in a BiCuSeO system by improving carrier mobility through 3D modulation doping10.1021/ja507945h ↗
31. Dual vacancies: an effective strategy realizing synergistic optimization of thermoelectric property in BiCuSeO10.1021/jacs.5b01863 ↗
32. Synergistically optimizing electrical and thermal transport properties of BiCuSeO via a dual-doping approach10.1002/aenm.201502423 ↗
33. The thermoelectric properties of SnSe continue to surprise: extraordinary electron and phonon transport10.1021/acs.chemmater.8b03732 ↗
34. Charge and phonon transport in PbTe-based thermoelectric materials10.1038/s41535-018-0127-y ↗
35. Thermoelectric materials: energy conversion between heat and electricity10.1016/j.jmat.2015.01.001 ↗
36. Attempting to realize n-type BiCuSeO10.1016/j.jssc.2017.11.012 ↗
37. Realization of n-type and enhanced thermoelectric performance of p-type BiCuSeO by controlled iron incorporation10.1039/C8TA03521K ↗
38. Thermoelectric properties of copper selenide with ordered selenium layer and disordered copper layer10.1016/j.nanoen.2012.02.010 ↗
39. Copper ion liquid-like thermoelectrics10.1038/nmat3273 ↗
40. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
41. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
42. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
43. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
44. High thermoelectric performance of oxyselenides: intrinsically low thermal conductivity of Ca-doped BiCuSeO10.1038/am.2013.15 ↗
45. Effects of Sb compensation on microstructure, thermoelectric properties and point defect of CoSb3 compound10.1088/0022-3727/40/21/044 ↗
46. Structural and electronic transport properties in Sr-doped BiCuSeO10.1021/cm301492z ↗
47. Wang · 2012 · vol. 109 · 9705
48. Enhancing thermoelectric performance of n-type PbSe via additionally meso-scale phonon scattering10.1039/C7QI00051K ↗
49. Revealing the role of thiocyanate anion in layered hybrid halide perovskite (CH3NH3)2Pb(SCN)2I210.1063/1.4984615 ↗