Influence of seed layer on crystal orientation and electrical properties of (Na0.85K0.15)0.5Bi0.5TiO3 thin films prepared by a sol–gel process
Source abstract
Abstract
Abstract Sol–gel derived lead-free (Na 0.85 K 0.15 ) 0.5 Bi 0.5 TiO 3 (NKBT) thin films, with and without a Pb 0.8 La 0.1 Ca 0.1 Ti 0.975 O 3 (PLCT) seed layer, were fabricated on (111)Pt/Ti/SiO 2 /Si substrates. The influences of the seed layer on crystal orientation and electrical properties were investigated in detail. XRD indicated that the NKBT thin films fabricated with a seed layer were fully crystallized into a single perovskite structure, while the films fabricated under the same conditions, but without a seed layer, possessed a certain amount of pyrochlore phase. The NKBT film with a 14 nm-thick seed layer showed high (100) orientation, and exhibited enhanced electrical properties, such as a higher remanent polarization ( Pr ∼18 µC/cm 2 ), a lower dielectric loss tangent (tan δ ∼0.023) and smaller transient current density ( J −5 A/cm 2 ).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Multiferroics and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Sol–gel preparation and characterization of calcium modified lead titanate (PCT) thin films10.1016/j.ceramint.2003.12.143 ↗
2. Phase evolution and electrical properties of lead zirconate titanate thin films grown by using a triol sol–gel route10.1016/j.ceramint.2007.10.038 ↗
3. Enhanced piezoelectric and ferroelectric properties of Nb2O5 modified lead zirconate titanate-based composites10.1111/j.1551-2916.2010.04309.x ↗
4. Orientation Dependence of electrical properties of 0.96Na0.5Bi0.5TiO3-0.04BaTiO3 lead-free piezoelectric single crystal10.1007/s00339-008-5065-2 ↗
5. Preparation, dielectric and ferroelectric properties of (Na0.5Bi0.5)0.94Ba0.06TiO3 thin films by a sol–gel process10.1007/s10971-010-2346-y ↗
6. Piezoelectric and dielectric aging of Bi0.5(Na0.82K0.18)0.5TiO3 lead-free ferroelectric thick films10.1063/1.3437637 ↗
7. The synthesis of lead-free ferroelectric Bi0.5Na0.5TiO3-Bi0.5K0.5TiO3 thin films by sol–gel method10.1016/j.matlet.2006.08.023 ↗
8. Effect of Sc doping on the structure and electrical properties of (Na0.85K0.15)0.5Bi0.5TiO3 thin films prepared by sol–gel processing10.1111/j.1551-2916.2011.04428.x ↗
9. The effect of crystallographic orientation and solution aging on the electrical properties of sol–gel derived Pb(Zr0.45Ti0.55)O3 thin films10.1016/j.ceramint.2006.06.010 ↗
10. Dielectric and tunable properties of highly (110)-oriented (Ba0.65Sr0.35)TiO3 thin films deposited on Pt/LaNiO3/SiO2/Si substrates10.1007/s10971-008-1831-z ↗
11. Microstructure and electric properties of (Pb0.8Ca0.2)TiO3 thin films prepared by rf magnetron sputtering with a seed layer10.1016/j.matlet.2012.04.044 ↗
12. Thickness and Nb-doping effects on ferro- and piezoelectric properties of highly a-axis-oriented Nb-doped Pb(Zr0.3Ti0.7)O3 films10.1063/1.2975164 ↗
13. Low-temperature crystallization and orientation evolution of Nb-doped Pb(Zr,Ti)O3 thin films using a Pb0.8Ca0.1La0.1Ti0.975O3 seed layer10.1016/j.scriptamat.2008.10.003 ↗
14. Piezoresponse and ferroelectric properties of lead-free [Bi0.5(Na0.7K0.2Li0.1)0.5]TiO3 thin films by pulsed laser deposition10.1063/1.2938364 ↗
15. Dielectric and ferroelectric response of sol–gel derived Pb0.85La0.15TiO3 ferroelectric thin films on different bottom electrodes10.1016/S0040-6090(01)01784-9 ↗
16. Model of leakage characteristics of (Ba,Sr)TiO3 thin films10.1063/1.122050 ↗
17. Fatigue-free lead zirconate titanate-based capacitors for nonvolatile memories10.1063/1.1392970 ↗
18. Enhanced ferro- and piezoelectric properties in (100)-textured Nb-doped Pb(ZrxTi1−x)O3 films with compositions at morphotropic phase boundary10.1016/j.tsf.2009.04.045 ↗