journal article·2019-04

Improved sintering ability of SiC ceramics from SiC@Al2O3 core-shell nanoparticles prepared by a slow precipitation method

Yiteng Liu, Rongzheng Liu, Malin Liu

Ceramics International· Volume 45· Issue 6
Publisher page

Abstract

Abstract SiC@Al2O3 composite nanoparticles with core-shell structure were prepared by a slow precipitation method, aimed at improving the sintering ability of SiC. SiC nanoparticles with average particle size of 100 nm were prepared by a fluidized bed-chemical vapor deposition (FB-CVD) method. The Al(OH)3 coating was formed by slow precipitation of aluminum nitrate in urea solution. The coating layer was then transformed to Al2O3 after further heat treatment. By controlling the rate of urea hydrolysis and the aluminum nitrate concentration in the solution, the thickness of the coating layer could be adjusted. The results of X-ray diffraction (XRD), Scanning electron microscope (SEM), Transmission electron microscope (TEM) and Energy Dispersive Spectrometer (EDS) indicated that Al2O3 was uniformly coated on the surface of SiC particles and the two phases were closely contacted. The improved sintering ability of SiC@Al2O3 composite nanoparticles were validated, and better mechanical properties were obtained compared with the sintering results using the conventional ball milling method.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Liquid phase sintering and characterization of SiC ceramics10.1016/j.ceramint.2018.03.083 ↗
2. Silicon carbide and diamond for high temperature device applications
3. Silver diffusion in silicon carbide coatings10.1111/j.1551-2916.2011.04544.x ↗
4. Chemical compatibility between UO2 fuel and SiC cladding for LWRs: application to ATF (Accident-tolerant fuels)10.1016/j.jnucmat.2017.02.031 ↗
5. Consolidation of nanostructured β-SiC by Spark plasma sintering10.1111/j.1551-2916.2004.01436.x ↗
6. Fabrication of nano-grained silicon carbide by ultrahigh-pressure hot isostatic pressing10.1111/j.1151-2916.1999.tb01833.x ↗
7. Mechanical properties of reaction sintered SiC-TiC composite10.1016/j.ceramint.2018.05.050 ↗
8. Sintering additives for SiC based on the reactivity: a review10.1016/j.ceramint.2016.09.022 ↗
9. Alumina sol assisted sintering of SiC-Al2O3 composites10.1111/j.1151-2916.2000.tb01304.x ↗
10. Influence of silica and aluminum contents on sintering of and grain growth in 6H-SiC powders10.1111/j.1151-2916.2000.tb01177.x ↗
11. Effective sintering aids for silicon carbide ceramics: reactivities of silicon carbide with various additives10.1111/j.1151-2916.1986.tb07398.x ↗
12. Metal oxide additives for the sintering of silicon carbide: reactivity and densification10.1016/j.cap.2012.07.027 ↗
13. Effect of alumina on the properties of ultra-high pressure sintered silicon carbide
14. Dispersion of SiC in aqueous media with Al2O3 and Y2O3 as sintering additives10.1111/j.1551-2916.2005.00193.x ↗
15. Large-scale synthesis of monodisperse SiC nanoparticles with adjustable size, stoichiometric ratio and properties by fluidized bed chemical vapor deposition10.1007/s11051-016-3737-y ↗