journal article·2015-04

Influence of process parameters on the sensitivity of an amperometeric NO2 sensor with La0.75Sr0.25Cr0.5Mn0.5O3−δ sensing electrode prepared by the impregnation method

Lei Dai, Ling Wang, Yinlin Wu, Huizhu Zhou, Yuehua Li, Jing Zhu

Ceramics International· Volume 41· Issue 3
Publisher page

Abstract

Perovskite-type oxide La0.75Sr0.25Cr0.5Mn0.5O3−δ (LSCM) as sensing electrode for detection of NO2 was fabricated by impregnating the porous Ce0.9Gd0.1O1.95 (CGO) backbone with LSCM precursor solution. The sensing performances of the amperometric type sensor prepared under different conditions were investigated. The results indicated that the sensitivity of the sensor was strongly dependent on the LSCM loading level, CGO porous layer thickness, polarization potential and LSCM fabricating temperature. The influences of the LSCM loading and porous backbone thickness on the sensing performance of the sensor suggested that the porous structure of CGO backbone was not only appropriate for preparing nano-structure LSCM sensing electrode by impregnation, but also helpful for the mass transfer of NO2 to the triple phase boundary. When the applied potential moved negatively, the response current and sensitivity increased. Increasing the calcining temperature could improve the adhesion of LSCM to CGO backbone which was in favor of better sensing performance while increasing the LSCM particle size which resulted in the dropping of response current and sensitivity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Analytical Chemistry and Sensors · Advanced Chemical Sensor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. NOx sensors based on semiconducting metal oxide nanostructures: progress and Perspectives10.1016/j.snb.2012.05.026 ↗
2. Semiconducting metal oxides as sensors for environmentally hazardous gases10.1016/j.snb.2011.08.032 ↗
3. Development of zirconia-based potentiometric NOx sensors for automotive and energy industries in the early 21st century: what are the prospects for sensors?10.1016/j.snb.2006.03.044 ↗
4. Materials for high temperature electrochemical NOx gas sensors10.1016/j.snb.2006.04.077 ↗
5. Zirconia-based electrochemical gas sensors using nano-structured sensing materials aiming at detection of automotive exhausts10.1016/j.electacta.2008.12.040 ↗
6. High-selectivity mixed-potential NO2 sensor incorporating Au and CuO+CuCr2O4 electrode couple10.1016/j.snb.2005.12.039 ↗
7. Impedancemetric NOx Sensing Using YSZ Electrolyte and YSZ/Cr2O3 composite electrodes10.1149/1.2430646 ↗
8. Sensing behavior and mechanism of mixed potential NOx sensors using NiO, NiO(+YSZ) and CuO oxide electrodes10.1016/j.snb.2008.10.006 ↗
9. Mixed-potential-type zirconia-based NO2 sensor with high-performance three-phase boundary10.1016/j.snb.2011.02.051 ↗
10. Highly sensitive mixed-potential-type NO2 sensor using porous double-layer YSZ substrate10.1016/j.snb.2013.03.064 ↗
11. An amperometric NO2 sensor based on nano-structured La0.75Sr0.25Cr0.5Mn0.5O3−δ prepared by impregnating method10.1016/j.jallcom.2012.02.101 ↗
12. A novel impedancemetric NO2 sensor based on nano-structured La0.75Sr0.25Cr0.5Mn0.5O3−δ prepared by impregnating method10.1016/j.snb.2013.07.083 ↗
13. A planar, impedancemetric NO2 sensor based on NiO nanoparticles sensing electrode10.1016/j.matlet.2012.06.032 ↗
14. A La10Si5NbO27.5 based electrochemical sensor using nano-structured NiO sensing electrode for detection of NO210.1016/j.matlet.2013.07.032 ↗
15. NO2 sensing performances of planar sensor using stabilized zirconia and thin-NiO sensing electrode10.1016/j.snb.2007.07.127 ↗
16. Equivalent circuit analysis on NOx impedance-metric gas sensors10.1016/j.snb.2008.11.055 ↗
17. Variation of the oxygen exchange rate of zirconia-based electrodes by electrochemical pretreatment10.1016/S0167-2738(98)00164-7 ↗
18. High performance air electrode for solid oxide regenerative fuel cells fabricated by infiltration of nano-catalysts10.1016/j.jpowsour.2013.10.123 ↗