Crack tolerant TaC–SiC ceramics prepared by spark plasma sintering
Source abstract
Abstract
Abstract To achieve the densification of tough tantalum carbide ceramics at low sintering temperature, we reported a preparation of TaC ceramics by spark plasma sintering with SiC as the sintering aid and graphene platelet (GPL) as the reinforcement. The effects of GPL contents on the densification, grain growth and mechanical properties of the TaC–SiC/GPL composites were evaluated. Due to the surface reactions between SiC and TaC particles, relative density of the composite increased to 99.3% at GPL content of 1.0 wt%. The GPLs wrapped around the grains and acted as barriers for mass diffusion, therefore inhibiting grain growth. The flexural strength of the composite increased at first and reached maximum value of 570 MPa at the GPL content of 1.0 wt%; the fracture toughness reached the peak value of 5.8 MPa m1/2 at the GPL content of 1.5 wt%. Bending, bridging and pullout of GPLs were considered as the main toughening mechanisms. Thus, this work provides a new guide for the fabrication of TaC ceramics with high density and high fracture strength.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Graphene nanoplatelets reinforced tantalum carbide consolidated by spark plasma sintering10.1016/j.msea.2013.06.006 ↗
2. Ultrahigh-pressure consolidation and deformation of tantalum carbide at ambient and high temperatures10.1016/j.actamat.2013.03.014 ↗
3. Adsorption properties and preparation of porous TaC ceramics with regular steps10.1016/j.jallcom.2017.10.134 ↗
4. Ta4C3 MXene as supercapacitor electrodes10.1016/j.jallcom.2019.04.096 ↗
5. Tantalum carbide as a novel support material for anode electrocatalysts in polymer electrolyte membrane water electrolysers10.1016/j.ijhydene.2011.11.035 ↗
6. Strength and toughness: the challenging case of TaC-based composites10.1016/j.compositesb.2014.11.043 ↗
7. Ab initio investigations of the phase stability in tantalum carbides10.1016/j.actamat.2014.07.070 ↗
8. Sintering highly dense ultra-high temperature ceramics with suppressed grain growth10.1016/j.jeurceramsoc.2019.11.056 ↗
9. Improving the mechanical properties of tantalum carbide particle-reinforced iron-based composite by varying the TaC contents10.1016/j.jallcom.2017.08.050 ↗
10. Spark plasma sintered tantalum carbide: effect of pressure and nano-boron carbide addition on microstructure and mechanical properties10.1016/j.msea.2010.10.009 ↗
11. Densification kinetics and mechanical properties of tantalum carbide10.1016/j.ijrmhm.2018.02.013 ↗
12. Densification of tantalum carbide ceramics with 5 mol.% Al, Cu, Ag and Au10.1016/j.scriptamat.2013.06.024 ↗
13. Recrystallization behavior and thermal shock resistance of the W-1.0 wt% TaC alloy10.1016/j.jnucmat.2018.01.042 ↗
14. Effect of boron addition on microstructure, mechanical properties and oxidation resistance of TaC ceramics10.1016/j.ceramint.2018.12.160 ↗
15. Densification and mechanical properties of TaC-based ceramics10.1016/j.msea.2008.09.024 ↗
16. Effects of Al2O3 content on densification, microstructure, mechanical properties and oxidation resistance of TaC-Al2O3 composites10.1016/j.ijrmhm.2018.10.012 ↗
17. Preparation of Si3N4-TaC and Si3N4-ZrC composite ceramics and their mechanical properties10.1016/j.ijrmhm.2016.09.017 ↗
18. Microstructure and mechanical properties of TaC ceramics with 1–7.5 mol% Si as sintering aid10.1111/jace.14806 ↗
19. Microstructure and mechanical properties of the spark plasma sintered TaC/SiC composites: effects of sintering temperatures10.1016/j.jeurceramsoc.2012.04.042 ↗
20. Sintering mechanism and microstructure of TaC/SiC composites consolidated by plasma-activated sintering10.1016/j.ceramint.2019.09.229 ↗
21. Comparison of HfB2 and ZrB2 behaviors for using in nuclear industry10.1016/j.anucene.2017.12.060 ↗
22. Densification of ZrB2-based composites and their mechanical and physical properties: a review10.1016/j.jeurceramsoc.2008.11.008 ↗
23. Fracture toughness and hardness investigation in ZrB2–SiC–ZrC composite10.1016/j.matchemphys.2019.122284 ↗
24. Microstructure and mechanical properties of the spark plasma sintered TaC/SiC composites10.1016/j.msea.2011.09.079 ↗
25. Toughening in graphene ceramic composites10.1021/nn200319d ↗
26. Graphene reinforced metal and ceramic matrix composites: a review10.1080/09506608.2016.1219481 ↗
27. Graphene for the development of the next-generation of biocomposites for dental and medical applications10.1016/j.dental.2017.04.008 ↗
28. From bulk to cellular structures: a review on ceramic/graphene filler composites10.1016/j.jeurceramsoc.2017.03.016 ↗
29. Deformation mechanism in graphene nanoplatelet reinforced tantalum carbide using high load in situ indentation10.1016/j.msea.2016.07.110 ↗
30. Sintering mechanism and microstructure of TaC/SiC composites consolidated by plasma-activated sintering10.1016/j.ceramint.2019.09.229 ↗
31. Preparation and characterization of tantalum carbide (TaC) ceramics10.1016/j.ijrmhm.2015.06.015 ↗
32. Microstructure and properties of HfC and TaC-based ceramics obtained by ultrafine powder10.1016/j.jeurceramsoc.2010.10.036 ↗
33. Transient liquid phase sintering of tantalum carbide ceramics by using silicon as the sintering aid and its effects on microstructure and mechanical properties10.1016/j.matchemphys.2014.10.052 ↗