journal article·2021-01

Multiphase composite Hf0.8Ti0·2B2–SiC–Si coating providing oxidation and ablation protection for graphite under different high temperature oxygen-containing environments

Yan Jiang, Weilin Liu, Na Wang, Hongqiang Ru

Ceramics International· Volume 47· Issue 2
Publisher page

Abstract

Abstract A novel multiphase composite coating composed of Hf0.8Ti0·2B2 solid solution, SiC and Si was prepared by a joint procedure of slurry method and silicon reactive infiltration (SRI). The oxidation and ablation experiments were conducted to investigate oxidation and ablation resistance of the Hf0.8Ti0·2B2–SiC–Si coated graphite samples, respectively. The results revealed that the coated sample was oxidized at 1823 K for 108 h with a mass gain of 1.49%, which was ascribed to the high viscosity oxide layer improved by HfSiO4 and TiO2 in conjunction with dense structure of the coating, thereby presenting excellent high temperature stability. Furthermore, after 90 s ablation at 3273 K under a heat flux of 5.62 MW/m2, the composite coating was not peeled off, which had mass ablation rate (MAR) and linear ablation rate (LAR) of 3.1 mg/s and 1.5 μm/s, respectively. The refractory oxide layer comprising oxides of Hf and Ti on the surface acted as an oxygen barrier, which can weaken the mechanical erosion force of oxyacetylene flame, finally protecting the inner coating and graphite matrix from further consumption.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Effect of HfB2 and WC additives on the ablation resistance of ZrB2-SiC composite coating manufactured by SPS
2. HfC-ZrC-SiC multiphase protective coating for SiC-coated C/C composites prepared by supersonic atmospheric plasma spraying10.1016/j.ceramint.2016.10.120 ↗
3. Oxidation behavior and microstructural evolution of plasma sprayed La2O3-MoSi2-SiC coating on carbon/carbon composites10.1016/j.surfcoat.2018.05.038 ↗
4. Oxidation and ablation resistance of the ZrB2-CrSi2-Si/SiC coating for C/C composites at high temperature10.1016/j.jallcom.2015.12.011 ↗
5. Dynamic oxidation protective ultrahigh temperature ceramic TaB2-20%wt SiC composite coating for carbon material10.1016/j.compositesb.2018.10.080 ↗
6. Oxidation behavior of SiC-HfB2-Si coating on C/C composites prepared by slurry dipping combined with gaseous Si infiltration10.1016/j.surfcoat.2020.125335 ↗
7. Oxidation and ablation protection of plasma sprayed LaB6-MoSi2-ZrB2 coating for carbon/carbon composites10.1016/j.corsci.2019.01.043 ↗
8. Constructing self-healing ZrSi2-MoSi2 coating for C/C composites with enhanced oxidation protective ability10.1016/j.surfcoat.2018.05.002 ↗
9. Effect of Yb2O3 addition on oxidation/ablation behaviors of ZrB2-MoSi2 composite coating under different environments10.1016/j.corsci.2020.108882 ↗
10. A double layer nanostructure SiC coating for anti-oxidation protection of carbon/carbon composites prepared by chemical vapor reaction and chemical vapor deposition10.1016/j.ceramint.2012.11.104 ↗
11. The effects of MoSi2 on the oxidation behavior of carbon/carbon composites10.1016/S0008-6223(00)00248-7 ↗
12. A MoSi2-SiC-Si/MoSi2 coating to protect carbon/carbon composites against oxidation at 1700°C10.1142/S0218625X09012822 ↗
13. Microstructure and anti-oxidation property of CrSi2-SiC coating for carbon/carbon composites10.1016/j.apsusc.2005.05.018 ↗
14. Synthesis of mullite coatings by chemical vapor deposition10.1557/JMR.1996.0166 ↗
15. SiC/SiC-YAG-YSZ oxidation protective coatings for carbon/carbon composites10.1016/j.corsci.2013.01.013 ↗
16. Ablation behavior of Y2SiO5/SiC coating for C/C composites under oxyacetylene torch10.1016/j.corsci.2014.07.008 ↗
17. Yttrium silicate oxidation protection coating for SiC coated carbon/carbon composites10.1016/j.ceramint.2005.03.018 ↗
18. Multilayer coating with self-sealing properties for carbon-carbon composites10.1016/S0008-6223(03)00228-8 ↗
19. Ablation and surface heating behaviors of graphite based Ir-Al coating in a plasma wind tunnel10.1016/j.surfcoat.2018.10.047 ↗
20. Oxidation-protective iridium and iridium-rhodium coatings produced by electrodeposition from molten salts [J]10.1149/1.2721466 ↗
21. Gradient HfB2-SiC multilayer oxidation resistant coating for C/C composites10.1016/j.ceramint.2018.08.104 ↗
22. HfC nanowire-toughened TaSi2-TaC-SiC-Si multiphase coating for C/C composites against oxidation10.1016/j.corsci.2014.10.048 ↗
23. ZrB2-SiC gradient oxidation protective coating for carbon/carbon composites10.1016/j.ceramint.2013.12.055 ↗
24. Preparation of TaB2-SiC oxidation protective coating for carbon materials by liquid phase sintering10.1016/j.ceramint.2018.03.105 ↗
25. The oxidation resistance of two-temperature synthetic HfB2-SiC coating for the SiC coated C/C composites10.1016/j.jallcom.2018.03.043 ↗
26. A WSi2-HfB2-SiC coating for ultralong-time anti-oxidation at 1973 K10.1016/j.corsci.2018.11.007 ↗
27. Oxidation protection and mechanism of the HfB2-SiC-Si/SiC coatings modified by in-situ strengthening of SiC whiskers for C/C composites10.1016/j.ceramint.2018.04.025 ↗
28. Ablation-resistant carbide Zr0.8Ti0.2C0.74B0.26 for oxidizing environments up to 3000°C10.1038/ncomms15836 ↗
29. Preparation of oxidation protective Hf0.2Ta0.8B2-x-SiC coating by in-situ reaction method on SiC-coated carbon/carbon composites10.1016/j.jallcom.2014.08.185 ↗
30. TaxHf1-xB2-SiC multiphase oxidation protective coating for SiC-coated carbon/carbon composites10.1016/j.corsci.2014.07.016 ↗
31. Oxidation protection of graphite materials by single-phase ultra-high temperature boride modified monolayer Si-SiC coating10.1016/j.ceramint.2018.09.206 ↗
32. Oxidation and ablation protection of double layer HfB2-SiC-Si/SiC-Si coating for graphite materials10.1016/j.jallcom.2018.12.256 ↗
33. A dense structure Si-SiC coating for oxidation and ablation protection of graphite fabricated by impregnation-pyrolysis and gaseous silicon infiltration10.1016/j.ceramint.2018.06.201 ↗
34. Microstructure and ablation resistance of ZrCxNy-modified ZrC-SiC composite coating for carbon/carbon composites10.1016/j.jeurceramsoc.2018.05.043 ↗
35. Oxidation and ablation protection of multiphase Hf0.5Ta0.5B2-SiC-Si coating for graphite prepared by dipping-pyrolysis and reactive infiltration of gaseous silicon10.1016/j.apsusc.2018.08.042 ↗
36. Self-healing ZrB2-SiO2 oxidation resistance coating for SiC coated carbon/carbon composites10.1016/j.corsci.2016.04.040 ↗
37. Oxidation behavior of C/C composites with SiC/ZrSiO4-SiO2 coating10.1016/S1003-6326(17)60045-1 ↗
38. SiC nanowire-toughened MoSi2-WSi2-SiC-Si multiphase coating for improved oxidation resistance of C/C composites10.1016/j.ceramint.2016.05.056 ↗
39. Multilayer oxidation protective coating for C/C composites from room to 1500°C10.1016/j.surfcoat.2009.11.026 ↗
40. Ablation behavior of three-dimensional Cf/SiC-ZrC-ZrB2 composites prepared by a joint process of sol-gel and reactive melt infiltration10.1016/j.corsci.2018.02.011 ↗
41. Oxidation and ablation protection of graphite materials by monolayer MoSi2-CrSi2-SiC-Si multiphase coating10.1016/j.ceramint.2018.08.013 ↗