journal article·2021-02Open access

Femtosecond Ti: Sa ultra short-pulse laser irradiation effects on the properties and morphology of the zirconia surface after ageing

Vanessa Harumi Kiyan, Flávia Pires Rodrigues, Ricardo Elgul Samad, Denise Maria Zezell, Marco Antonio Bottino, Nelson Batista De Lima, Cintia Helena Coury Saraceni

Ceramics International· Volume 47· Issue 4

Abstract

Abstract Femtosecond pulses from a Ti:Sapphire laser were used to irradiate specimens of yttria-stabilised (35% mol) tetragonal zirconia (Y-TZP) with the purpose of studying the effects of the irradiations on their surface properties and morphology after ageing. Zirconia disks were divided into eight groups (n = 32) according to their surface treatment and subsequent ageing: Control: no treatment; sandblasting: Al2O3 sandblasting 50 μm; and ultrashort laser pulses irradiation with 25 μJ pulses, considering two different scanning steps based on the width between two grooves. These groups were duplicated and submitted to ageing. The surfaces were analysed using scanning electron microscopy (SEM), and X-ray diffraction. A finite element analysis, a biaxial flexure test, as well as fractographic and Weibull analyses, were performed. The strengths of the disks were statistically different for the treatment factor, and the principal stresses seemed to be concentrated at the centre of the specimens, as predicted by the computer simulations. Ageing decreased the strengths for all groups and increased the Weibull modulus for the laser group with the 40 μm-width between two grooves. The sandblasting group presented the highest monoclinic phase peak. Although the most significant strength was found within the sandblasting group, the phase transformation was favourable to the laser groups. The Weibull modulus was higher for the laser group with the 60 μm-width between two grooves, confirming the highest homogeneity of its failure distribution. Regardless of the surface treatment, strength was decreased with ageing in all groups. The femtosecond Ti:Sa ultra-short pulse laser irradiation can be suggested as an alternative to the gold standard sandblasting in long-term Y-TZP zirconia rehabilitations, such as crowns and veneers.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Dental materials and restorations · Building materials and conservation · Laser Material Processing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (71)

Show source-provided references
1. Effect of grinding with diamond-disc and -bur on the mechanical behavior of a Y-TZP ceramic10.1016/j.jmbbm.2014.05.010 ↗
2. Effect of intermediate ceramics and firing temperature on bond strength between tetragonal zirconia polycrystal and veneering ceramics10.4012/dmj.2013-070 ↗
3. The effect of sandblasting, Er:YAG laser, and heat treatment on the mechanical properties of different zirconia cores10.1089/pho.2015.3980 ↗
4. Mechanical behavior of yttria-stabilised tetragonal zirconia polycrystal: effects of different aging regimens10.1590/1807-3107bor-2017.vol31.0094 ↗
5. Concerns of hydrothermal degradation in CAD/CAM Zirconia10.1177/0022034509354193 ↗
6. A zircônia na Odontologia Restauradora
7. Influence of firing time and framework thickness on veneered Y-TZP discs curvature10.1016/j.dental.2013.11.009 ↗
8. Influence of a surface conditioner to pre-sintered zirconia on the biaxial flexural strength and phase transformation10.1016/j.dental.2017.12.004 ↗
9. Microstructure of veneered zirconia after surface treatments: a TEM study10.1016/j.dental.2013.07.022 ↗
10. To evaluate effect of airborne particle abrasion using different abrasives particles and compare two commercial available zirconia on flexural strength on heat treatment10.59566/IJBS.2017.13093 ↗
11. Effect of various lasers on the bond strength of two zirconia ceramics10.1089/pho.2014.3841 ↗
12. Effect of CO2 and Nd:YAG lasers on shear bond strength of resin cement to zirconia ceramic
13. Influence of cyclic loading on the adhesive effectiveness of resin-zirconia interface after femtosecond laser irradiation and conventional surface treatments10.1002/lsm.22442 ↗
14. Bonding between oxide ceramics and adhesive cement systems: a systematic review10.1002/jbm.b.33013 ↗
15. Bonding to oxide ceramics - laboratory testing versus clinical outcome10.1016/j.dental.2014.06.007 ↗
16. Shear bond strength of the repair composite resin to zirconia ceramic by different surface treatment
17. Adhesion to zirconia used for dental restorations: a systematic review and meta-analysis
18. Strength influencing variables on CAD/CAM zirconia frameworks10.1016/j.dental.2007.06.030 ↗
19. Zirconia surface treatments for resin bonding
20. Effect of sandblasting on the long-term performance of dental ceramics10.1002/jbm.b.30097 ↗
21. Effects of different lasers and particle abrasion on surface characteristics of zirconia ceramics
22. Effect of femtosecond laser beam angle on bond strength of zirconia-resin cement10.1007/s10103-015-1762-1 ↗
23. Effect of ultrashort pulsed laser on bond strength of Y-TZP zirconia ceramic to tooth surfaces10.4012/dmj.2014-235 ↗
24. Ultrashort laser pulses machining
25. Laser-induced shape changes of colloidal gold nanorods using femtosecond and nanosecond laser pulses10.1021/jp000679t ↗
26. Kerr lens mode locking10.1364/OL.17.001292 ↗
27. Compression of amplified chirped optical pulses10.1016/0030-4018(85)90120-8 ↗
28. Generation of ultrahigh peak power pulses by chirped pulse amplification10.1109/3.137 ↗
29. Ablation of metals by ultrashort laser pulses10.1364/JOSAB.14.002716 ↗
30. Optical ablation by high-power short-pulse lasers10.1364/JOSAB.13.000459 ↗
31. A study of the deterministic character of optical damage by femtosecond laser pulses and applications to nanomachining10.1007/s00340-003-1246-z ↗
32. Influence of pulse duration on ultrashort laser pulse ablation of biological tissues10.1117/1.1381561 ↗
33. The effect of femtosecond laser treatment on the effectiveness of resin-zirconia adhesive: an in vitro study10.15171/jlms.2016.38 ↗
34. Multimodal evaluation of ultra-short laser pulses treatment for skin burn injuries
35. The effect of low temperature aging on the mechanical property & phase stability of Y-TZP ceramics10.4047/jap.2009.1.3.113 ↗
36. Low temperature degradation -aging- of zirconia: a critical review of the relevant aspects in dentistry10.1016/j.dental.2010.04.006 ↗
37. Thermo and mechanical cycling and veneering method do not influence Y-TZP core/veneer interface bond strength10.1016/j.jdent.2012.12.001 ↗
38. Low-temperature degradation of zirconia and implications for biomedical implants10.1146/annurev.matsci.37.052506.084250 ↗
39. Bonding effectiveness to differently sandblasted dental zirconia
40. The effect of grinding and/or airborne-particle abrasion on the bond strength between zirconia and veneering porcelain: a systematic review10.1080/23337931.2017.1293486 ↗
41. Low-temperature degradation of Y-TZP ceramics: a systematic review and meta-analysis10.1016/j.jmbbm.2015.10.017 ↗
42. Examination of bond strength and mechanical properties of Y-TZP zirconia ceramics with different surface modifications10.4012/dmj.2011-237 ↗
43. Ceramic strengthening by tuning the elastic moduli of resin-based luting agents10.1016/j.dental.2017.01.002 ↗
44. Seating load parameters impact on dental ceramic reinforcement conferred by cementation with resin-cements10.1016/j.dental.2010.05.006 ↗
45. The strength of sintered and adhesively bonded zirconia/veneer-ceramic bilayers10.1016/j.jdent.2014.08.001 ↗
46. Biaxial flexural strength of bilayered disk composed of ceria-stabilised zirconia/alumina nanocomposite (Ce-TZP/A) and veneering porcelain10.1016/j.dental.2018.05.003 ↗
47. Bond strength of veneer ceramic and zirconia cores with different surface modifications after microwave sintering10.4047/jap.2013.5.4.485 ↗
48. Influence of nano-structured alumina coating on shear bond strength between Y-TZP ceramic and various dual-cured resin cements10.4047/jap.2017.9.2.130 ↗
49. Effects of silica coating by physical vapor deposition and repeated firing on the low-temperature degradation and flexural strength of a zirconia ceramic
50. Comparison of different low-temperature aging protocols: its effects on the mechanical behavior of Y-TZP ceramics10.1016/j.jmbbm.2016.02.017 ↗
51. Theoretical analyses and numerical simulations on the mechanical strength of multilayers subjected to ring-on-ring tests10.1016/j.matdes.2013.03.090 ↗
52. Stress distributions in thin bilayer discs subjected to ball-on-ring tests10.1111/j.1551-2916.2005.00343.x ↗
53. Low-temperature degradation of a Y-TZP ceramic after surface treatments10.1002/jbm.b.32957 ↗
54. Critical effect of cubic phase on aging in 3 mol% yttria-stabilised zirconia ceramics for hip replacement prosthesis10.1016/j.biomaterials.2004.01.002 ↗
55. Quantitative phase analysis from X-ray diffraction in Y-TZP dental ceramics: a critical evaluation10.1016/j.jdent.2014.08.010 ↗
56. A new modified laser pretreatment for porcelain zirconia bonding10.1016/j.dental.2013.03.002 ↗
57. Fracture strength and microstructure of Y-TZP zirconia after different surface treatments10.1016/S0022-3913(13)60376-5 ↗
58. Effect of low-temperature aging on the mechanical behavior of ground Y-TZP10.1016/j.jmbbm.2014.12.009 ↗
59. Phase change and mechanical properties of ZrO2-Y2O3 solid electrolyte after ageing10.1016/0167-2738(81)90138-7 ↗
60. The evaluation of prepared microgroove pattern by femtosecond laser on alumina-zirconia nano-composite for endosseous dental implant application10.1007/s10103-016-2059-8 ↗
61. Shear bond strengths between three different yttria-stabilised zirconia dental materials and veneering ceramic and their susceptibility to autoclave induced low-temperature degradation10.1155/2016/9658689 ↗
62. The influence of resin flexural modulus on the magnitude of ceramic strengthening10.1016/j.dental.2012.04.003 ↗
63. Bonding effectiveness to differently sandblasted dental zirconia
64. Comparative study of flexural strength test methods on CAD/CAM Y-TZP dental ceramics10.1093/rb/rbv020 ↗
65. ADM guidance—ceramics: Fracture toughness testing and method selection10.1016/j.dental.2017.03.006 ↗
66. The effect of grinding and/or airborne-particle abrasion on the bond strength between zirconia and veneering porcelain: a systematic review10.1080/23337931.2017.1293486 ↗
67. The effect of zirconia surface treatment on flexural strength and shear bond strength to a resin cement10.1016/S0022-3913(10)60033-9 ↗
68. Current status of zirconia restoration10.1016/j.jpor.2013.09.001 ↗
69. Meta-analysis of bonding effectiveness to zirconia ceramics10.1177/0022034514524228 ↗
70. Fracture load and phase transformation of monolithic zirconia crowns submitted to different aging protocols10.2341/15-154-L ↗
71. Is there a potential for durable adhesion to zirconia restorations? A systematic review10.1016/j.prosdent.2015.09.008 ↗