journal article·2021-07Open access

Hierarchically structured lead-free barium strontium titanate for low-grade thermal energy harvesting

Yinxiang Bao, Baiyun Huang, Kechao Zhou, James Roscow, Eleanor Roake, Margaret Hopkins, Dou Zhang, Yan Zhang, Chris Bowen

Ceramics International· Volume 47· Issue 13

Abstract

Abstract Low-grade heat conversion is one of the most promising strategies to realise carbon-neutral electricity production. Here we present a study on a hierarchically structured porous pyroelectric barium strontium titanate (BST) ceramic with a low Curie temperature and improved thermal energy harvesting performance. The aligned porous structure is beneficial to achieve a greatly reduced permittivity and heat capacity, combined with a high degree of polarisation to maintain a high pyroelectric coefficient. These characteristics contributed to significantly improved sensing and harvesting pyroelectric figures-of-merit, where the thermal energy harvesting figure-of-merit ( F E ′ ) increased by 510% when the porosity reached to 54 vol%, compared to that of the dense BST ceramic. After rectification of the AC pyroelectric current to a DC current, the electric output was stored on a 1 μF capacitor whose voltage after 20 s increased with increasing volume fraction of porosity; namely 5.8 V (dense, 3 vol% porosity), 6.9 V (30 vol%), 7.5 V (43 vol%) and 9.2 V (54 vol%). A maximum energy density of 4.26 μJ/mm3 was obtained from the BST with 54 vol% porosity, which was 1.6 times higher than that of the dense counterpart (2.71 μJ/mm3). This aligned porous structure therefore represents a new and promising architecture for facile harvesting and conversion of low-grade waste heat into electrical power.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Multiferroics and related materials · Innovative Energy Harvesting Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Estimating the global waste heat potential10.1016/j.rser.2015.12.192 ↗
2. Industrial waste heat recovery technologies: an economic analysis of heat transformation technologies10.1016/j.apenergy.2015.01.147 ↗
3. L.L.N.L.E.U.S.E.C.i. Quads, Esitmated U.S. Energy Comsuption in 2019: 100.2 Quads..
4. Energy scavenging from ultra-low temperature gradients10.1039/C8EE03084G ↗
5. Control of electro-chemical processes using energy harvesting materials and devices10.1039/C7CS00387K ↗
6. Waste heat recovery technologies and applications10.1016/j.tsep.2018.04.017 ↗
7. Enhanced piezoelectric response in nanoclay induced electrospun PVDF nanofibers for energy harvesting10.1016/j.energy.2019.01.043 ↗
8. Study of piezoelectric behaviour of sputtered KNbO3 nanocoatings for flexible energy harvesting10.1016/j.energy.2020.118068 ↗
9. Pyroelectric materials and devices for energy harvesting applications10.1039/C4EE01759E ↗
10. An inconvenient truth about thermoelectrics10.1038/nmat2361 ↗
11. A modified figure of merit for pyroelectric energy harvesting10.1016/j.matlet.2014.10.004 ↗
12. Significantly enhanced pyroelectric performance in novel sodium niobate-based lead-free ceramics by compositional tuning10.1111/jace.16681 ↗
13. Zhao · 2020
14. Surface and thickness effect on the ferroelectric, dielectric and pyroelectric properties of Mn-doped Pb(Mg1/3Nb2/3)O3–0.28PbTiO3 single crystals10.1016/j.jallcom.2019.152500 ↗
15. Porous sandwich structures based on BaZrTiO3–BaCaTiO3 ceramics for piezoelectric energy harvesting10.1016/j.jallcom.2020.154792 ↗
16. Piezoelectric performance of PZT-based materials with aligned porosity: experiment and modelling10.1088/1361-665X/ab5018 ↗
17. Effect of porosity on the ferroelectric and piezoelectric properties of (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 piezoelectric ceramics10.1016/j.scriptamat.2017.10.022 ↗
18. Enhanced pyroelectric figure of merits of porous BaSn0.05Ti0.95O3 ceramics10.1016/j.jeurceramsoc.2017.05.015 ↗
19. Freeze cast porous barium titanate for enhanced piezoelectric energy harvesting10.1088/1361-6463/aabc81 ↗
20. Enhanced pyroelectric and piezoelectric properties of PZT with aligned porosity for energy harvesting applications10.1039/C7TA00967D ↗
21. Mimicking nacre by ice templating10.1002/anie.201610176 ↗
22. Preparation of AlN micro-honeycombs with high permeability via freeze-casting10.1016/j.jeurceramsoc.2020.05.010 ↗
23. Morphology of latex and nanocomposite adsorbents prepared by freeze-casting10.1039/C4TA05743K ↗
24. Cuttlebone-like V2O5 nanofibre scaffolds – advances in structuring cellular solids10.1038/srep42951 ↗
25. Control of pore channel size during freeze casting of porous YSZ ceramics with unidirectionally aligned channels using different freezing temperatures10.1016/j.jeurceramsoc.2010.07.032 ↗
26. Freeze casting: from low-dimensional building blocks to aligned porous structures-A review of novel materials
27. Demonstration of enhanced piezo-catalysis for hydrogen generation and water treatment at the ferroelectric Curie temperature10.1016/j.isci.2020.101095 ↗
28. Influence of Sr and Zr substitution on dielectric properties of (Ba1-xSrx)(Ti1-xZrx)O310.1080/00150193.2014.892387 ↗
29. Study on magnetoelectric properties of Ni0.5Zn0.5Fe2O4/Ba0.8Sr0.2TiO3 composite ceramics based on Bi2O3 as combustion aid10.1007/s10854-020-02954-2 ↗
30. Synthesis, sintering and dielectric properties of a BaTiO3–Ni composite10.1016/j.ceramint.2013.12.075 ↗
31. Performing elemental microanalysis with high accuracy and high precision by scanning electron microscopy/silicon drift detector energy-dispersive X-ray spectrometry (SEM/SDD-EDS)10.1007/s10853-014-8685-2 ↗
32. Characterization of hollow BaTiO3 nanofibers and intense visible photoluminescence10.1063/1.4823988 ↗
33. X-ray photoelectron spectroscopy study on the composition and structure of BaTiO3 thin films deposited on silicon10.1016/S0169-4332(99)00495-X ↗
34. Investigations on the chemical states of sintered barium titanate by X-ray photoelectron spectroscopy10.1016/S0169-4332(02)01223-0 ↗
35. X-ray photoelectron spectroscopic investigations on cubic BaTiO3, BaTi0.9Fe0.1O3 and Ba0.9Nd0.1TiO3 systems10.1016/j.apsusc.2008.05.316 ↗
36. Surface chemistry of the titanium powder studied by XPS using internal standard reference10.1080/00325899.2016.1271092 ↗
37. 1979
38. Microstructural and compositional studies of liquid-phase deposition derived PbTiO3 thin films on LaNiO3 substrates10.1016/j.apsusc.2007.03.073 ↗
39. Moulder · 1992
40. Comparison of nanoscaled and bulk NiO structural and environmental characteristics by XRD, XAFS, and XPS10.1021/cm300739y ↗
41. Bulk photovoltaic effect in reduced/oxidized lead lanthanum titanate zirconate ceramics10.1143/JJAP.34.2344 ↗
42. Aligned porous barium titanate/hydroxyapatite composites with high piezoelectric coefficients for bone tissue engineering10.1016/j.msec.2014.02.022 ↗
43. The lure of ice-templating: recent trends and opportunities for porous materials10.1016/j.scriptamat.2017.06.020 ↗
44. Functionally graded porous ceramics with dense surface layer produced by freeze-casting10.1016/j.ceramint.2011.04.119 ↗
45. Ice-templated porous alumina structures10.1016/j.actamat.2006.11.003 ↗
46. High pyroelectric properties of porous Ba0.67Sr0.33TiO3 for uncooled infrared detectors10.1111/j.1551-2916.2009.03355.x ↗
47. Porous PZT ceramics with cligned core channels for energy harvesting cpplications10.1111/jace.13797 ↗
48. Pressure, temperature, frequency dependence of dielectric properties10.1002/pssa.2210740127 ↗
49. Dielectric and piezoelectric properties of porous lead-free 0.5Ba(Ca0.8Zr0.2)O3-0.5(Ba0.7Ca 0.3)TiO3 ceramics10.1016/j.materresbull.2018.08.031 ↗
50. Understanding the effect of porosity on the polarisation-field response of ferroelectric materials10.1016/j.actamat.2018.05.007 ↗
51. Temperature and frequency dependence of the coercive field of 0.71PbMb1/3Nb2/3O3–0.29PbTiO3 relaxor-based ferroelectric single crystal10.1063/1.4998187 ↗
52. Electric field and temperature scaling of polarization reversal in silicon doped hafnium oxide ferroelectric thin films10.1016/j.actamat.2015.07.035 ↗
53. The electrical resistance of binary metallic mixtures10.1063/1.1702301 ↗
54. Thermal conductivity of highly porous zirconia10.1016/j.jeurceramsoc.2005.11.011 ↗
55. Weast · 1972
56. Mechanical properties and thermal conductivity of porous alumina ceramics obtained from particle stabilized foams10.1016/j.ceramint.2014.10.011 ↗
57. Pyro-electrolytic water splitting for hydrogen generation10.1016/j.nanoen.2019.01.030 ↗
58. Pyroelectric nanoplates for reduction of CO2 to methanol driven by temperature-variation10.1038/s41467-020-20517-1 ↗
59. Pyro-catalytic hydrogen evolution by Ba0.7Sr0.3TiO3 nanoparticles: harvesting cold–hot alternation energy near room-temperature10.1039/C8EE01016A ↗
60. Strong pyro-catalysis of shape-controllable bismuth oxychloride nanomaterial for wastewater remediation10.1016/j.apsusc.2020.145630 ↗