An Enhanced Johnson–Cook Model for Hot Compressed A356 Aluminum Alloy
Source abstract
Abstract
The isothermal compression experiments with the strain rates of 0.01–10 s−1 and deformation temperature range of 300–420 °C are performed to investigate the hot deformation behavior of A356 aluminum alloy. Also, the complex deformation mechanisms are analyzed. It is found that, as the strain is gradually increased, the flow stress first rises, and then the stable stress appears without a tangible peak. The microstructures exhibit large elongated grains, and only a few small new grains appear under most deformation conditions. It is because the dynamic recovery (DRV) is the dominant softening mechanism. Based on the measured data, both the original Johnson–Cook (O–JC) model and modified Johnson–Cook model (M–JC) are built for the tested aluminum alloy. However, there are different deviations between the experimental and the predicted true stresses by O–JC model and M–JC model. Considering the obvious DRV features, an enhanced Johnson–Cook (EH–JC) model is proposed by introducing the stress–dislocation relation. The accuracy of the EH–JC model is validated because the correlation coefficient between the experimental and predicted results is as high as 0.997, whereas the average absolute relative error is merely 2.84%.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Automotive and Mechanical Engineering Changsha University of Science and Technology Changsha 410114 China
Hunan Provincial Key Laboratory of Intelligent Manufacturing Technology for High-performance Mechanical Equipment Changsha 410083 China
School of Mechanical and Electrical Engineering Central South University Changsha 410083 China
Wuhan National Laboratory for Optoelectronics Huazhong University of Science and Technology Wuhan 430074 China
Funding
National Natural Science Foundation of China
References (61)
Show source-provided references
1. 10.1016/S1003-6326(18)64692-810.1016/S1003-6326(18)64692-8 ↗
2. 10.1016/j.matdes.2010.11.04810.1016/j.matdes.2010.11.048 ↗
3. 10.1016/j.vacuum.2019.10886310.1016/j.vacuum.2019.108863 ↗
4. 10.1016/j.jmapro.2018.03.01710.1016/j.jmapro.2018.03.017 ↗
5. 10.1016/j.msea.2017.10.03710.1016/j.msea.2017.10.037 ↗
6. 10.1016/j.matdes.2015.03.01210.1016/j.matdes.2015.03.012 ↗
7. 10.1016/j.msea.2015.02.01010.1016/j.msea.2015.02.010 ↗
8. 10.1016/j.matdes.2014.08.04510.1016/j.matdes.2014.08.045 ↗
9. 10.1016/S1003-6326(15)64043-210.1016/S1003-6326(15)64043-2 ↗
10. 10.1016/j.vacuum.2019.01.00810.1016/j.vacuum.2019.01.008 ↗
11. 10.1002/adem.20180123210.1002/adem.201801232 ↗
12. 10.1002/adem.20190119310.1002/adem.201901193 ↗
13. 10.1016/j.matdes.2014.02.04110.1016/j.matdes.2014.02.041 ↗
14. 10.1007/s11665-015-1617-810.1007/s11665-015-1617-8 ↗
15. 10.1016/j.vacuum.2019.10897010.1016/j.vacuum.2019.108970 ↗
16. 10.1007/s11665-015-1734-410.1007/s11665-015-1734-4 ↗
17. Vilamosa V. · O.S. Hopperstad Mater. Des. · 2016 · 103 · 391
18. 10.1016/j.matdes.2018.05.02210.1016/j.matdes.2018.05.022 ↗
19. 10.1016/j.mechmat.2018.12.01210.1016/j.mechmat.2018.12.012 ↗
20. 10.1016/j.mechmat.2015.11.01310.1016/j.mechmat.2015.11.013 ↗
21. 10.1016/j.commatsci.2013.01.01010.1016/j.commatsci.2013.01.010 ↗
22. 10.1016/j.jallcom.2018.05.25210.1016/j.jallcom.2018.05.252 ↗
23. 10.1007/s00339-016-0333-z10.1007/s00339-016-0333-z ↗
24. 10.1557/jmr.2015.36810.1557/jmr.2015.368 ↗
25. 10.1016/j.matdes.2019.10812210.1016/j.matdes.2019.108122 ↗
26. 10.1016/j.msea.2018.01.10910.1016/j.msea.2018.01.109 ↗
27. 10.1002/adem.20190093010.1002/adem.201900930 ↗
28. 10.1016/j.commatsci.2013.11.00310.1016/j.commatsci.2013.11.003 ↗
29. 10.3390/met607016110.3390/met6070161 ↗
30. 10.1016/j.commatsci.2014.10.04410.1016/j.commatsci.2014.10.044 ↗
31. 10.1016/j.msea.2015.03.03610.1016/j.msea.2015.03.036 ↗
32. 10.1007/s11665-018-3527-z10.1007/s11665-018-3527-z ↗
33. 10.1002/adem.20150037810.1002/adem.201500378 ↗
34. 10.1007/s11665-018-3237-610.1007/s11665-018-3237-6 ↗
35. 10.1016/j.jallcom.2017.03.02910.1016/j.jallcom.2017.03.029 ↗
36. 10.1016/j.vacuum.2016.12.02210.1016/j.vacuum.2016.12.022 ↗
37. 10.1007/s00339-016-0683-610.1007/s00339-016-0683-6 ↗
38. 10.1016/j.matdes.2018.05.02210.1016/j.matdes.2018.05.022 ↗
39. 10.1007/s11665-018-3416-510.1007/s11665-018-3416-5 ↗
40. 10.1016/j.msea.2020.13969210.1016/j.msea.2020.139692 ↗
41. 10.1007/s00339-016-0248-810.1007/s00339-016-0248-8 ↗
42. 10.1016/j.jmrt.2019.01.00310.1016/j.jmrt.2019.01.003 ↗
43. 10.1016/j.jallcom.2017.06.25110.1016/j.jallcom.2017.06.251 ↗
44. 10.1016/j.jallcom.2014.09.00210.1016/j.jallcom.2014.09.002 ↗
45. 10.1016/j.commatsci.2015.11.03410.1016/j.commatsci.2015.11.034 ↗
46. 10.1016/j.matdes.2013.06.01010.1016/j.matdes.2013.06.010 ↗
47. 10.1016/j.jallcom.2017.12.27810.1016/j.jallcom.2017.12.278 ↗
48. 10.1016/j.msea.2017.12.01510.1016/j.msea.2017.12.015 ↗
49. 10.1016/j.matdes.2014.08.02110.1016/j.matdes.2014.08.021 ↗
50. 10.1016/j.matdes.2012.12.08210.1016/j.matdes.2012.12.082 ↗
51. 10.1016/j.msea.2013.06.03710.1016/j.msea.2013.06.037 ↗
52. 10.1016/j.msea.2017.04.08610.1016/j.msea.2017.04.086 ↗
53. 10.1016/j.msea.2012.06.08410.1016/j.msea.2012.06.084 ↗
54. 10.1016/j.vacuum.2017.05.01010.1016/j.vacuum.2017.05.010 ↗
55. 10.1016/S0921-5093(00)01421-010.1016/S0921-5093(00)01421-0 ↗
56. 10.1016/j.msea.2014.12.01610.1016/j.msea.2014.12.016 ↗
57. 10.1016/j.msea.2010.07.06110.1016/j.msea.2010.07.061 ↗
58. 10.1016/0001-6160(81)90112-710.1016/0001-6160(81)90112-7 ↗
59. 10.1016/j.mechrescom.2007.10.00210.1016/j.mechrescom.2007.10.002 ↗
60. 10.1016/j.msea.2020.13961210.1016/j.msea.2020.139612 ↗
61. 10.1016/j.msea.2018.04.04910.1016/j.msea.2018.04.049 ↗