journal article·2011-08

Microstructural and phase transformations during sintering of a phillipsite rich zeolitic tuff

Sibel Ergul, Giuseppe Sappa, Donatello Magaldi, Paola Pisciella, Mario Pelino

Ceramics International· Volume 37· Issue 6
Publisher page

Abstract

Abstract Microstructural and phase transformations during sintering of a Phillipsite rich zeolitic tuff, from Tenerife, Canary Islands, was investigated in order to their utilization in ceramic manufacturing industries. Green samples were obtained from powders and pressed at 150 MPa and heat-treated for 1 hour in the temperature range between 900-1080 °C. The zeolitic tuffs show endothermic peaks at about 100 °C and 200 °C, corresponding to dehydration of zeolitic water observed in the thermo- gravimetric curves and at ∼700 °C a small endothermic peak was identified corresponding to the structural breakdown of Phillipsite. According to the dilatometric traces, at about 870 °C, sintering of solid particles starts and a linear shrinkage of about 6% is reached at about 1050 °C. The maximum absolute and apparent densities were obtained after sintering at 1040 °C (absolute density = 2.59 g/cm 3 ; apparent density = 2.33 g/cm 3 ). Over this temperature, the sample heat-treated at 1060 °C, density results show a decreasing trend. The chemical composition of studied zeolitic tuffs make possible the liquid phase formation during heat-treatment, through the supplement of alkaline oxides. SEM image of the sample obtained at 1040 °C shows a zone with micro-crystallinity around the boundary of Sanidine grain highlighting the beginning of the phase transition from Sanidine, to Microcline. Heat-treatment effect of zeolitic tuff leads to the decomposition of Phillipsite and Sanidine and the formation of a new crystal phase of Hematite.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Nuclear materials and radiation effects · Glass properties and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Use of sodalime scrap-glass as a fluxing agent in a porcelain stoneware tile mix10.1016/S0955-2219(03)00121-3 ↗
2. Possible use of altered volcanic ash in ceramic tile production
3. Effect of soda-lime glass on sintering and technological properties of porcelain stoneware tiles10.1016/S0272-8842(02)00067-6 ↗
4. Utilisation of municipal incinerator grate slag for manufacturing of porcelainized stoneware tiles manufacturing10.1016/S0955-2219(01)00460-5 ↗
5. The effect of scrap addition on the sintering behaviour of hard porcelain10.1016/j.ceramint.2005.05.009 ↗
6. Zeolitic tuffs as raw materials for lightweight aggregates10.1016/j.clay.2003.08.005 ↗
7. Effect of substitution of fly ash for quartz in triaxial kaolin–quartz–feldspar system10.1016/j.jeurceramsoc.2003.10.008 ↗
8. Incorporation of granite cutting sludge in industrial porcelain tile formulations10.1016/j.jeurceramsoc.2003.10.039 ↗
9. Mumpton · 1999 · 96
10. Industrial Minerals & Rocks, Commodities
11. Passaglia · 2008
12. Prospects of using zeolite rocks of Siberia in silicate materials10.1023/A:1022544727179 ↗
13. Ovcharenko · 2000
14. The use of mineral materials of Siberia in the production of self-glazing ceramic tiles10.1007/BF02768186 ↗
15. G. R. Vagner, N.N. Kruglitskii, and V. G. Tikhonov, Prediction of the efficiency of using zeolite minerals in cement for various purposes, in: Proc. XIV Conference of Silicate Industry and Science, Budapest (1985), 307–314.
16. Fabrication of microporous ceramics from ceramic powders of quartz–natural zeolite mixtures10.1016/S0272-8842(03)00047-6 ↗
17. Influence of zeolites on the sintering and technological properties of porcelain stoneware tiles10.1016/S0955-2219(03)00086-4 ↗
18. Thermal behaviour of a zeolitic tuff10.1016/j.ceramint.2006.01.003 ↗
19. Breck · 1974
20. Zeolites upon heating: Factors governing their thermal stability and structural changes10.1016/j.jpcs.2006.05.057 ↗
21. Thermal Behaviour of Natural Zeolites
22. Dielectric behaviour of porcelain in relation to constitution10.1016/S0272-8842(00)00029-8 ↗
23. Schüller · 1979
24. Strand · 1986 · 8
25. Sinter-crystallization of a glass obtained from basaltic tuffs10.1016/j.jnoncrysol.2007.07.040 ↗
26. Quantitative determination of crystalline and amorphous phases in glass-ceramics by X-ray diffraction analysis
27. http://www.micromeritics.com
28. FTIR spectroscopy investigation of the crystallization process in an iron rich glass10.1016/j.jeurceramsoc.2004.06.012 ↗
29. Compositional Parameters to Evaluate Feldspathic Fluxes for Ceramic Tiles
30. The relation between structure and vibrational spectra of natural zeolites10.1016/S0022-2860(01)00741-4 ↗
31. Thermodynamic Properties of Zeolites: Low-Temperature Heat Capacities and Thermodynamic Functions for Phillipsite and Clinoptilolite. Estimates of the Thermochemical Properties of Zeolitic Water at Low Temperature
32. Bio- beneficiation of kaolin and feldspar and its effect on fired characteristics of triaxial porcelain10.1007/s12034-010-0051-7 ↗
33. Dilatometric study of shrinkage during sintering process for porcelain stoneware body in presence of nepheline syenite10.1016/j.jmatprotec.2008.03.033 ↗
34. Zeolite–feldspar epiclastic rocks as flux in ceramic tile manufacturing10.1016/j.micromeso.2007.04.023 ↗
35. Assessing the fusibility of feldspathic fluxes for ceramic tiles by hot stage microscope
36. Microstructural Changes During the Firing of Stoneware Floor Tiles10.1016/0169-1317(93)90037-2 ↗
37. Science for ceramic Production, Wall ceramics from zeolite-bearing argillaceous materials