La0.8Sr0.2Ga0.8Mg0.2O3 electrolytes prepared by vacuum cold spray under heated gas for improved performance of SOFCs
Source abstract
Abstract
Abstract High impact velocity of particles has found its common way into the vacuum cold spray (VCS), but heating gas may further intensify this function, resulting in significantly higher impact velocity. That's the original design idea to realize denser ceramic deposition at low temperature in this paper. In this study, a ~ 10 µm thick La0.8Sr0.2Ga0.8Mg0.2O3 (LSGM) electrolyte layer for SOFCs is prepared by VCS under heated gas. The effects of gas temperature on the deposition behavior, mechanical and electrical properties of the coatings are investigated. Results show improvements in coating density, hardness and ionic conductivity at elevated temperature. Additionally, the output performance of cell with LSGM electrolytes deposited at gas temperature of 400 °C achieved an open circuit voltage of ~ 1.0 V and the maximum power density of 855 mW/cm2 at 750 °C. Overall, these findings testify of the promising aspects of VCS method for preparing solid electrolyte films for IT-SOFCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advancements in Solid Oxide Fuel Cells · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Solid oxide fuel cells: fundamental aspects and prospects10.1016/S0013-4686(00)00330-3 ↗
2. Materials and technologies for SOFC-components10.1016/S0955-2219(01)00120-0 ↗
3. Solid electrolytes with oxygen ion conduction10.1016/0167-2738(84)90024-9 ↗
4. Doped LaGaO3 perovskite-type oxide as a new oxide ionic conductor10.1021/ja00088a016 ↗
5. Superior oxygen ion conductivity of lanthanum gallate doped with strontium and magnesium10.1149/1.1836692 ↗
6. Fuel cells with doped lanthanum gallate electrolyte10.1016/S0378-7753(96)02441-X ↗
7. Electrode performance test on single ceramic fuel cells using as electrolyte Sr- and Mg-doped LaGaO310.1149/1.1838058 ↗
8. Characterization of the electrode and electrolyte interfaces of LSGM-based SOFCs10.1016/j.ssi.2006.02.011 ↗
9. Characterization of Sr-doped LaMnO3 and LaCoO3 as cathode materials for a doped LaGaO3 ceramic fuel cell10.1149/1.1837262 ↗
10. Enhanced sintering behavior of LSGM electrolyte and its performance for solid oxide fuel cells deposited by vacuum cold spray10.1016/j.jeurceramsoc.2017.06.007 ↗
11. Intermediate temperature solid oxide fuel cells using LaGaO3 based oxide film deposited by PLD method10.1016/j.ijhydene.2009.12.174 ↗
12. Specific considerations for obtaining appropriate La(1-x)Sr(x)Ga(1-y)MgyO(3-δ) thin films using pulsed-laser deposition and its influence on the performance of solid-oxide fuel cells10.1016/j.jpowsour.2014.10.023 ↗
13. Solid oxide fuel cells with (La,Sr)(Ga,Mg)O3-δ electrolyte film deposited by radio-frequency magnetron sputtering10.1016/j.jpowsour.2015.01.185 ↗
14. Powder preparation in aerosol deposition method for lead zirconate titanate thick films10.1143/JJAP.41.6980 ↗
15. Alumina thick films as integral substrates using aerosol deposition method10.1143/JJAP.43.5414 ↗
16. Electrical conductivity of Gd-doped ceria film fabricated by aerosol deposition method10.1016/j.ssi.2013.01.022 ↗
17. Bonding mechanism in cold gas spraying10.1016/S1359-6454(03)00274-X ↗
18. Adiabatic shear instability based mechanism for particles/substrate bonding in the cold-gas dynamic-spray process10.1016/j.matdes.2004.03.008 ↗
19. Development of a generalized parameter window for cold spray deposition10.1016/j.actamat.2005.10.005 ↗
20. Growth process of α-Al2O3 ceramic films on metal substrates fabricated at room temperature by aerosol deposition10.1111/j.1551-2916.2011.04493.x ↗
21. Numerical simulation on impact velocity of ceramic particles propelled by supersonic nitrogen gas flow in vacuum chamber10.2320/matertrans.T-MRA2007833 ↗
22. Influence of impact angle and gas temperature on mechanical properties of titanium cold spray deposits10.1007/s11666-010-9557-1 ↗
23. Synergistic effects of high temperature and impact compaction on the nano-TiO2 film for the significant improvement of photovoltaic performance of flexible dye-sensitized solar cells10.1016/j.electacta.2012.09.055 ↗
24. Alumina doped Ni/YSZ anode materials for solid oxide fuel cells10.1002/fuce.200800152 ↗
25. Preliminary study of performance of dye-sensitized solar cell of nano-TiO2 coating deposited by vacuum cold spraying10.2320/matertrans.47.1703 ↗
26. Effect of the powder particle structure and substrate hardness during vacuum cold spraying of Al2O310.1016/j.ceramint.2016.12.085 ↗
27. Corrosion protection performance of YSZ coating on AA7075 aluminum alloy prepared by aerosol deposition10.1149/2.038302jes ↗
28. Microstructure and ionic conductivity in Li7La3Zr2O12 film prepared by aerosol deposition method10.1149/2.0411501jes ↗
29. Substrate hardness dependency on properties of Al2O3 thick films grown by aerosol deposition10.1016/j.surfcoat.2012.08.012 ↗
30. Gas dynamic principles of cold spray10.1361/105996398770350945 ↗
31. New developments in cold spray based on higher gas and particle temperatures10.1361/105996306X147144 ↗
32. Deposition mechanism of dry sprayed ceramic particles at room temperature using a nano-particle deposition system10.1016/j.actamat.2011.01.007 ↗
33. Deposition behavior of thermally softened copper particles in cold spraying10.1016/j.actamat.2013.04.041 ↗
34. On the modelling of the compaction mechanism of shock compacted powders10.1016/S0924-0136(00)00748-2 ↗
35. Explosive compaction of powders, principle and prospects10.1002/mawe.19890201213 ↗
36. Relationships between the microstructure and properties of thermally sprayed deposits10.1361/105996302770348754 ↗
37. Electrical and mechanical characterization by instrumented indentation technique of La0.85Sr0.15Ga0.8Mg0.2O3-δ electrolyte for SOFCs10.1016/j.jeurceramsoc.2012.07.022 ↗
38. Correlation between electrical and mechanical properties in La1-xSrxGa1-yMgyO3-δ ceramics used as electrolytes for solid oxide fuel cells10.1016/j.jpowsour.2013.08.028 ↗
39. Electrochemical effects of cobalt doping on (La,Sr)(Ga,Mg)O3-δ electrolyte prepared by aerosol deposition10.1016/j.ijhydene.2012.01.055 ↗
40. Low temperature preparation and characterization of (La, Sr)(Ga, Mg)O3-δ electrolyte-based solid oxide fuel cells on Ni-support by aerosol deposition10.1016/j.tsf.2013.05.014 ↗
41. Atmospheric plasma-sprayed La0.8Sr0.2Ga0.8Mg0.2O3 electrolyte membranes for intermediate-temperature solid oxide fuel cells10.1039/C5TA01203A ↗
42. Effect of plasma spraying power on LSGM electrolyte of metal-supported solid oxide fuel cells10.1016/j.ceramint.2017.05.192 ↗
43. Plasma sprayed metal-supported solid oxide fuel cell and stack with nanostructured anodes and diffusion barrier layer10.1016/j.tsf.2014.02.034 ↗
44. Plasma-sprayed YSZ/Ni-LSGM-LSCo intermediate-temperature solid oxide fuel cells10.1111/j.1744-7402.2008.02294.x ↗
45. Interactions between lanthanum gallate based solid electrolyte and ceria10.1016/S0025-5408(99)00220-2 ↗