Fabrication of porous alumina by directional freeze casting and annealing in TBA–water–sucrose system
Source abstract
Abstract
Abstract The volume change difference between water and tert-butyl alcohol (TBA) hydrate was approximately 10.1% when ceramic slurry with water–TBA was frozen for fabrication of porous ceramics. Residual stress may be produced at the pore walls and led to low compressive strength of the ceramics. In this regard, sucrose was used in the ceramic slurry. Several water–TBA crystals were observed in the sucrose amorphous bodies after directional freezing. Water and TBA in the sucrose amorphous bodies were recrystallized during subsequent annealing. Sucrose was used as a protective agent and annealing additive in the TBA–water–sucrose system to eliminate residual stress and change the pore structure from snowflakes and dendrites into tiny cylinders. Adding sucrose and annealing process exerted minimal effect on the open porosity of porous ceramics but remarkably improved their compressive strength. When TBA and sucrose contents were 30 and 20 wt%, respectively, in the ceramic slurry with 20 vol% alumina content, the compressive strength of porous ceramics was 49.9 MPa after annealing at − 15 °C for 2 h. The value was 3.6-fold higher than that of the ceramic without annealing. Results provide a new method for improving the mechanical properties of porous ceramics prepared by freeze casting.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Innovations in Concrete and Construction Materials · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Freezing as a path to build complex composites10.1126/science.1120937 ↗
2. Effects of SiC, SiO2, and CNTs nanoadditives on the properties of porous alumina-zirconia ceramics produced by a hybrid freeze casting-space holder method10.1016/j.jeurceramsoc.2016.10.035 ↗
3. A symmetrical, planar SOFC design for NASA's high specific power density requirements10.1016/j.jpowsour.2007.08.110 ↗
4. Freeze casting of hydroxyapatite scaffolds for bone tissue engineering10.1016/j.biomaterials.2006.06.028 ↗
5. Freeze casting – a review of processing, microstructure and properties via the open data repository, FreezeCasting.net10.1016/j.pmatsci.2018.01.001 ↗
6. Fabrication and characterization of porous β-tricalcium phosphate scaffolds coated with alginate10.1016/j.ceramint.2015.12.034 ↗
7. Influence of particle size on ice nucleation and growth during the ice-templating process10.1111/j.1551-2916.2010.03840.x ↗
8. Tailoring the pore structure and property of porous biphasic calcium phosphate ceramics by NaCl additive10.1016/j.ceramint.2016.06.092 ↗
9. Architectural control of freeze-cast ceramics through additives and templating10.1111/j.1551-2916.2009.03087.x ↗
10. Freeze casting of aqueous alumina slurries with glycerol for porous ceramics10.1016/j.ceramint.2009.09.036 ↗
11. Fabrication and properties of freeze-cast mullite foams derived from coal-series kaolin10.1016/j.ceramint.2016.04.181 ↗
12. Fabrication of porous ceramics with double-pore structure by stepwise freeze casting using water/diphenyl methane emulsion10.1016/j.ceramint.2017.09.233 ↗
13. Crystal templating with mutually miscible solvents: a simple path to hierarchical porosity10.1111/jace.12995 ↗
14. Preparation of tubular hierarchically porous silicate cement compacts via a tert-butyl alcohol (TBA)-based freeze casting method10.1016/j.cej.2016.03.023 ↗
15. Freeze cast fabrication of porous ceramics using tert-butyl alcohol–water crystals as template10.1016/j.jeurceramsoc.2015.12.047 ↗
16. Effects of annealing parameters on microstructural evolution of a typical nickel-based superalloy during annealing treatment10.1016/j.matchar.2018.04.056 ↗
17. Impact of fast and conservative freeze-drying on product quality of protein-mannitol-sucrose-glycerol lyophilizates10.1016/j.ejpb.2018.03.003 ↗
18. Annealing effects on the pore structures and mechanical properties of porous alumina via directional freeze-casting10.1016/j.jeurceramsoc.2018.04.038 ↗
19. Freeze casting of novel porous silicate cement supports using tert-butyl alcohol-water binary crystals as template: microstructure, strength and permeability10.1016/j.memsci.2017.06.067 ↗
20. Freeze-drying of tert-butyl alcohol/water cosolvent systems: effects of formulation and process variables on residual solvents10.1021/js9702832 ↗
21. Low temperature microscopy and thermal analysis of freeze-dried solutions
22. Thermal analysis of tertiary butyl alcohol/sucrose/water ternary system
23. Thermal analysis of the tertiary butyl alcohol-water system and its implications on freeze-drying10.1023/A:1016233408831 ↗
24. Aligned two- and three-dimensional structures by directional freezing of polymers and nanoparticles10.1038/nmat1487 ↗
25. Interaction of particles and a moving ice-liquid interface10.1016/0022-0248(85)90217-9 ↗
26. Aligned porous alumina ceramics with high compressive strengths for bone tissue engineering10.1016/j.scriptamat.2007.11.006 ↗