Influence of preparation method on microstructure and tribological behavior of C/C-BN composites
Source abstract
Abstract
Abstract In this study, with 2.5D needle punched carbon felt as reinforcement, hexagonal boron nitride (h-BN) was introduced through chemical vapor infiltration (CVI) and slurry impregnation (SI) methods, and then pyrocarbon was deposited through CVI to convert the BN-containing preform into carbon fiber reinforced carbon-boron nitride binary matrix composites (C/C-BN). The microstructure and mechanical properties of C/C-BN(P) composites prepared by SI combined with CVI were compared with those of C/C-BN(CVI) composites prepared by CVI. The tribological behavior of C/C-BN(P) composites containing different contents of h-BN fillers and C/C-BN(CVI) composites with and without heat treatment was investigated by the ball-on-disk technique in dry sliding conditions using GCr15 steel balls and Si3N4 balls as sliding counterparts at two different sliding speeds (v = 0.2 and 0.8 m/s), and compared with the C/C composites used as a reference. C/C-BN(P) composites exhibit improved tribological behavior, which can be explained by the combined effect of SI and CVI on the microstructure and mechanical properties, leading to changes in the wear mechanism of the C/C-BN composites. The excellent reinforcement is attributed to the integrity structure of the C/C-BN(P), which can make the self-lubricating friction layer stably exist on the surface of the material and significantly reduce the friction coefficient and wear loss of the C/C-BN(P) composite. Furthermore, the mechanical and tribological properties of C/C-BN(P) composites can be adjusted by using different volume content of h-BN. The present work shows that C/C-BN(P) composites have wide application prospects as anti-friction and wear-resistant materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Tribology and Wear Analysis · Metal and Thin Film Mechanics · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Hatta
2. Friction behaviors of carbon/carbon composites with different pyrolytic carbon textures10.1016/j.carbon.2005.08.022 ↗
3. Oxidative and hydrolytic stability of boron nitride - a new approach to improving the oxidation resistance of carbonaceous structures10.1016/0008-6223(94)00163-T ↗
4. Studies on the surface free energy of carbons-carbon composites: effect of filler addition on the ILSS of composites10.1006/jcis.2000.6787 ↗
5. Tensile strength and fracture toughness of C/C and metal infiltrated composites Si-C/C and Cu-C/C10.1016/j.compositesa.2007.11.004 ↗
6. Hatta · 2014
7. Effect of carbon nanotube addition on the tribological behavior of carbon/carbon composites10.1016/S0043-1648(02)00012-1 ↗
8. The effect of carbon nanotubes on the microstructure and morphology of pyrolytic carbon matrices of C-C composites obtained by CVI10.1016/j.compscitech.2004.11.005 ↗
9. Fabrication of fiber composites with a MAX phase matrix by reactive melt infiltration10.1088/1757-899X/18/20/202030 ↗
10. Effect of interface modified by graphene on the mechanical and frictional properties of carbon/graphene/carbon composites10.3390/ma9060492 ↗
11. Carbon/carbon-boron nitride composites with improved wear resistance compared to carbon/carbon10.1016/j.carbon.2004.05.024 ↗
12. Microstructure and tribological behaviors of C/C-BN composites fabricated by chemical vapor infiltration10.1016/j.ceramint.2012.04.063 ↗
13. Fabrication of oxidation-resistant carbon fiber/boron nitride matrix composites10.1021/cm00033a006 ↗
14. Effects of pore structure and distribution on strength of porous Cu-Sn-Ti alumina composites10.1016/j.cja.2017.08.008 ↗
15. Effects of h-BN particles on the microstructure and tribological property of self-lubrication CBN abrasive composites
16. Investigation on microstructure characteristics and tribological properties of self-lubricating metallic composites based on hexagonal boron nitride and molybdenum disulphide10.1115/1.4047948 ↗
17. Tribological behaviors of SiC/h-BN composite coating at elevated temperatures10.1016/j.triboint.2012.06.026 ↗
18. Influence of hBN content on mechanical and tribological properties of Si3N4/BN ceramic composites10.1016/j.jeurceramsoc.2014.02.021 ↗
19. Microstructures and tribological properties of carbon/carbon-boron nitride composites fabricated by powdered additives and chemical vapor infiltration10.1016/j.ceramint.2017.03.055 ↗
20. Measurements of fiber bundle interfacial properties of three-dimensionally reinforced carbon/carbon composites up to 2273 K10.1016/j.carbon.2006.07.028 ↗
21. Microstructure characterization from X-ray micro-tomography and tensile failure mechanism of 4D in-plane carbon/carbon composites
22. X-ray structure analysis and elastic properties of a fabric reinforced carbon/carbon composite10.1016/S0008-6223(01)00309-8 ↗
23. Oxidative and hydrolytic stability of boron nitride - a new approach to improving the oxidation resistance of carbonaceous structures10.1016/0008-6223(94)00163-T ↗
24. Effects of silanization of C/C composites and grafting of h-BN fillers on the microstructure and interfacial properties of CVI-based C/C-BN composites10.1016/j.ceramint.2020.09.192 ↗
25. Effect of in situ grown carbon nanotubes on the structure and mechanical properties of unidirectional carbon/carbon composites10.1016/j.msea.2010.11.067 ↗
26. Effect of carbon fiber reinforcement on the tribological performance and behavior of aircraft carbon brake discs10.1016/j.carbon.2017.03.003 ↗
27. BN coatings prepared by low pressure chemical vapor deposition using boron trichloride-ammonia-hydrogen-argon mixture gases10.1016/j.surfcoat.2010.02.046 ↗
28. Effect of silane grafted h-BN fillers on microstructure and mechanical properties of CVI-based C/C-BN composites
29. Regenerative laminar pyrocarbon10.1016/S0008-6223(02)00230-0 ↗
30. Friction and wear behavior of resin/graphite composite under dry sliding10.1016/j.jmst.2014.10.004 ↗
31. Effect of carbon nanotube addition on the tribological behavior of carbon/carbon composites10.1016/S0043-1648(02)00012-1 ↗
32. Fabrication of monolithic carbon nanofiber/carbon composites10.1039/C5RA26049C ↗
33. Tribological properties of pitch-based 2-D carbon-carbon composites10.1016/S0008-6223(00)00158-5 ↗
34. Effect of carbonization rate on the properties of a PAN/phenolic-based carbon/carbon composite10.1016/j.carbon.2004.08.024 ↗
35. Effect of heat treatment on the tribological behavior of 2D carbon/carbon composites10.1016/S0008-6223(03)00291-4 ↗
36. Effect of brake pressure and brake speed on the tribological properties of carbon/carbon composites with different pyrocarbon textures10.1016/j.wear.2010.09.010 ↗
37. Friction behaviors of carbon/carbon composites with different pyrolytic carbon textures10.1016/j.carbon.2005.08.022 ↗
38. Characterization of surface grooves and scratches induced by friction of C/C composites at low and high temperatures10.1016/j.triboint.2010.03.004 ↗
39. Tribological, physicochemical and thermal study of the abrupt friction transition during carbon/carbon composite friction10.1016/j.wear.2008.12.076 ↗
40. Effect of oxidation inhibitor on the low energy tribological behavior of carbon-carbon composites10.1016/S0008-6223(01)00202-0 ↗
41. Effects of selected nanoadditives on the friction and wear performance of carbon-carbon aircraft brake composites10.1016/j.wear.2011.01.093 ↗
42. Tribological properties of carbon nanotube-doped carbon/carbon composites10.1016/j.triboint.2005.09.004 ↗
43. Friction and wear behaviors of C/C-SiC composites containing Ti 3SiC 210.1016/j.wear.2011.08.029 ↗
44. High density carbon fiber/boron nitride matrix composites: fabrication of composites with exceptional wear resistance10.1016/j.carbon.2005.02.033 ↗
45. Mechanical properties of carbon-carbon composite components determined using nanoindentation10.1016/S0008-6223(98)00239-5 ↗
46. Microstructure and elastic properties of individual components of C/C composites10.1016/j.carbon.2009.07.057 ↗
47. Effect of braking speeds on the tribological properties of carbon/carbon composites10.2320/matertrans.M2009390 ↗
48. Fiber-matrix unbonding and plastic deformation in C/C composites under tribological loading10.1016/j.wear.2010.03.016 ↗
49. Sharp indentation behavior of carbon/carbon composites and varieties of carbon10.1016/S0008-6223(02)00169-0 ↗
50. Ozcan · 2008
51. Ozcan · 2008
52. The structural integrity of carbon fiber composites: fifty years of progress and achievement of the science
53. Interdependence between wear process, size of detached particles and CO2 production during carbon/carbon composite friction10.1016/j.wear.2007.01.077 ↗
54. Kasem · 2008
55. Peillex · 2007
56. Friction, lubrication, and wear Technology
57. Kato · 2002
58. Load dependence of oxidative wear in metal/ceramic tribocouples in fretting environment10.1016/j.wear.2012.04.010 ↗
59. Friction mechanisms in hydrogenated amorphous carbon coatings10.1016/0925-9635(95)00306-1 ↗
60. Hertzian stress contribution to low friction behavior of thin MoS 2 coatings10.1063/1.104276 ↗
61. Comment on “the coefficient of friction of high polymers as a function of pressure10.1063/1.1661018 ↗
62. Hertz model for contact of water droplet with superhydrophobic surface
63. Tribooxidational effects on friction and wear behavior of silicon nitride/tool steel and silicon nitride/gray cast iron contacts10.1111/j.1151-2916.1999.tb01859.x ↗
64. Tribological characteristics of self-mated couples of Si3N4-SiC composites in the range 22-700°C10.1016/S0043-1648(99)00243-4 ↗