Three-dimensional mesostructured binder-free nickel-based TiO2/RGO lithium-ion battery negative electrodes with enhanced volumetric capacity
Source abstract
Abstract
Abstract Realization of high energy density Li-ion anodes is a significant challenge due to the volume changes generally exhibited by such systems during charge and discharge. Here, three-dimensional inverse opal (3D-IO) mesostructured Ni@TiO2@RGO electrodes were fabricated by templating nickel electrodeposition with self-assembled, three dimensionally ordered polystyrene (PS) opals, followed by atomic layer deposition (ALD) of TiO2 and spray coating of reduced graphene oxide (RGO). The electrode delivers initial discharge and charge volumetric capacities of 2082 mAh cm-3 and 1873 mAh cm-3 at 0.5 C, respectively. The composite electrode exhibits volumetric discharge and charge capacities of 1508 mAh cm-3 and 1504 mAh cm-3 at 0.5 C after 200 cycles and good rate capacity up to at least 10 C. The almost unbroken 3D-IO mesostructure after 200 lithiation and delithiation cycles demonstrates the excellent structural stability of the 3D-IO electrode design concept. The enhanced volumetric capacity and structural stability originate from high active materials loading, the short and efficient ion and electron pathways, and the composite structure provided by the nickel electrodeposition, ALD, and RGO spray coating electrode preparation process, as well as that both TiO2 and RGO participate in lithium storage.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Transition Metal Oxide Nanomaterials · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Interplanar space-controllable carboxylate pillared metal organic framework ultrathin nanosheet for superhigh capacity rechargeable alkaline battery10.1016/j.nanoen.2019.06.009 ↗
2. Hydrothermal fabrication of three-dimensional secondary battery anodes10.1002/adma.201402552 ↗
3. Mesoporous silicon sponge as an anti-Pulverization structure for high-performance lithium-ion battery anodes10.1038/ncomms5105 ↗
4. A facile alkali metal hydroxide-assisted controlled and targeted synthesis of 1T MoS2 single crystal nanosheets for lithium ion battery anodes10.1039/C9NR04537F ↗
5. Metallic 1T phase MoS2/MnO composites with improved cyclability for lithium-ion battery anodes
6. Hierarchically structured lithium titanate for ultrafast charging in long-life high capacity batteries10.1038/ncomms15636 ↗
7. High-power lithium ion microbatteries from interdigitated three-dimensional bicontinuous nanoporous electrodes10.1038/ncomms2747 ↗
8. Two-dimensional 1T-PS2 as a promising anode material for sodium-ion batteries with ultra-high capacity, low average voltage and appropriate mobility10.1016/j.cclet.2020.04.045 ↗
9. Three-dimensional bicontinuous ultrafast-charge and -discharge bulk battery electrodes10.1038/nnano.2011.38 ↗
10. Multifunctional 3D nanoarchitectures for energy storage and conversion10.1039/B801151F ↗
11. Three-dimensional battery architectures10.1021/cr020740l ↗
12. LiFePO4-based electrode using micro-porous current collector for high power lithium ion battery10.1016/j.jpowsour.2007.08.014 ↗
13. Electroless nickel current collector for 3D-microbatteries10.1007/s10800-009-0014-0 ↗
14. Long cycle-life LiFePO4/Cu-Sn lithium ion battery using foam-type three-dimensional current collector10.1016/j.jpowsour.2009.10.014 ↗
15. Molten salt synthesis of LiNi0.5Mn1.5O4 Spinel for 5 V class cathode material of Li-ion secondary battery10.1016/j.electacta.2003.07.003 ↗
16. A polymer scaffold binder structure for high capacity silicon anode of lithium-ion battery10.1039/b918727h ↗
17. Carbon scaffold structured silicon anodes for lithium-ion batteries10.1039/c0jm00215a ↗
18. Regulating contents evolution of valence bonds on carbon surface to inhibit dissolution of polysulfides during production10.1016/j.carbon.2020.07.062 ↗
19. Zhang · 2017 · 29 · 1701115
20. Three-dimensional metal scaffold supported bicontinuous silicon battery anodes10.1021/nl204551m ↗
21. TiO2 Nanocages: fast synthesis, interior functionalization and improved lithium storage properties10.1002/adma.201104546 ↗
22. Rational design of three-layered TiO2 @carbon@MoS2 hierarchical nanotubes for enhanced lithium storage10.1002/adma.201702724 ↗
23. Graphene sandwiched mesostructured Li-ion battery electrodes10.1002/adma.201600829 ↗
24. 3D scaffolded nickel–tin Li-ion anodes with enhanced cyclability10.1002/adma.201504780 ↗
25. Green preparation of reduced graphene oxide for sensing and energy storage applications10.1038/srep04684 ↗
26. Boron-doped graphene nanoribbons: electronic structure and Raman fingerprint10.1021/acsnano.8b04125 ↗
27. Highly exposed [1] facets of titanium dioxide modified with reduced graphene oxide for dopamine densing10.1038/srep05044 ↗
28. Hydrogen-treated TiO2 nanowire arrays for photoelectrochemical water splitting10.1021/nl201766h ↗
29. A highly conductive porous graphene electrode prepared via in situ reduction of graphene oxide using Cu nanoparticles for the fabrication of high performance supercapacitors10.1039/C5RA07857A ↗
30. Water-soluble magnetic-functionalized reduced graphene oxide sheets: in situ synthesis and magnetic resonance imaging applications10.1002/smll.200901360 ↗
31. Improved performance in FeF2 conversion cathodes through use of a conductive 3D scaffold and Al2O3 ALD coating10.1002/adfm.201702783 ↗
32. Three-dimensionally mesostructured Fe2O3 electrodes with good rate performance and reduced voltage hysteresis10.1021/cm504365s ↗
33. Yolk-shell NiS2 nanoparticle embedded carbon fibers for flexible fiber-shaped sodium battery10.1002/aenm.201800054 ↗
34. Electrochemical performance of porous carbon/tin composite anodes for sodium-ion and lithium-ion batteries10.1002/aenm.201200346 ↗
35. Spray-dried mesoporous mixed Cu-Ni oxide@graphene nanocomposite microspheres for high power and durable Li-ion battery anodes10.1002/aenm.201802438 ↗
36. High electrochemical performance based on the TiO2 nanobelt@few-layered MoS2 structure for lithium-ion batteries10.1039/C4NR03991B ↗
37. Rationally designed hierarchical TiO2@Fe2O3 hollow nanostructures for improved lithium ion storage10.1002/aenm.201200953 ↗
38. Redox targeting of anatase TiO2 for redox flow lithium-ion Batteries10.1002/aenm.201400567 ↗
39. Aqueous rechargeable alkaline CoxNi2–xS2/TiO2 battery10.1021/acsnano.5b06275 ↗
40. Ice templated free-standing hierarchically WS2/CNT-rGO aerogel for high-performance rechargeable lithium and sodium ion batteries10.1002/aenm.201601057 ↗
41. Synthesis and rate performance of monolithic macroporous carbon electrodes for lithium-ion secondary batteries10.1002/adfm.200400186 ↗
42. High-performance mesostructured organic hybrid pseudocapacitor electrodes10.1002/adfm.201504307 ↗
43. Carbon-free TiO2 microspheres as anode materials for sodium ion batteries10.1021/acsenergylett.8b02510 ↗
44. Exfoliated 2D lepidocrocite titanium oxide nanosheets for high sulfur content cathodes with highly stable Li–S battery performance10.1021/acsenergylett.7b01202 ↗
45. Lithium intercalation into bilayer graphene10.1038/s41467-018-07942-z ↗
46. Reversible superdense ordering of lithium between two graphene sheets10.1038/s41586-018-0754-2 ↗