journal article·2021-05Open access

Low-temperature synthesis of bismuth titanate by modified citrate amorphous method

V.B. Tinti, D. Marani, A. Kabir, A.B. Haugen, V. Esposito, D.Z. de Florio

Ceramics International· Volume 47· Issue 9

Abstract

Abstract Bismuth titanate is a lead-free piezoelectric ceramic with outstanding properties that strictly depend on the composition and microstructure. However, bismuth-based materials are difficult to synthesize due to bismuth volatilisation that causes secondary phases and stoichiometry deviations. In this work, we propose a low-temperature chemical route, i.e. a modified amorphous citrate method, that allows a reduction of thermal treatment temperature, when compared with solid-state or other chemical routes, to obtain single-phase bismuth titanate samples. Single-phase powders with particle size under 300 nm are produced by calcination at 700 °C, and prepared into homogeneous dense pellets (density above 95%), with only isolated pores. The pellets show two distinctive features in the electrical behaviours directly associated with their mica-like microstructure: planar oriented boundaries are responsible for oxygen conduction, while the bulk is dominated by electronic conductivity. The samples show a high dielectric constant, around 200 at room temperature, while maintaining a low loss factor. The pellets also achieved a maximum polarisation of 5.85 μC/cm2 and an inverse piezoelectric coefficient of 7.4 pm/V. The dielectric and piezoelectric properties obtained are comparable or superior to the state-of-the-art.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Dielectric properties of ceramics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Lead-free piezoceramics – where to move on?
2. Transferring lead-free piezoelectric ceramics into application10.1016/j.jeurceramsoc.2014.12.013 ↗
3. Priya · 2012
4. Lead-free piezoceramics based on alkali niobates10.1016/j.jeurceramsoc.2005.03.126 ↗
5. Successful aqueous processing of a lead free 0.5Ba(Zr 0.2 Ti 0.8 )O 3 –0.5(Ba 0.7 Ca 0.3 )TiO 3 piezoelectric material composition10.1039/C4RA03172E ↗
6. Microfabrication of high aspect ratio BST pillar arrays by epoxy gel casting from aqueous suspensions with added water soluble epoxy resin10.1016/j.materresbull.2014.09.072 ↗
7. Hybrid atmosphere processing of lead-free piezoelectric sodium potassium niobate-based ceramics10.3390/ceramics2030035 ↗
8. Giant piezoelectricity in potassium–sodium niobate lead-free ceramics10.1021/ja500076h ↗
9. (Bi 1/2 Na 1/2 )TiO 3 -BaTiO 3 system for lead-free piezoelectric ceramics10.1143/JJAP.30.2236 ↗
10. Temperature-insensitive large strain of (Bi 1/2 Na 1/2 )TiO 3 -(Bi 1/2 K 1/2 )TiO 3 -(K 0.5 Na 0.5 )NbO 3 lead-free piezoceramics10.1111/j.1551-2916.2009.03573.x ↗
11. Coprecipitation synthesis of nanosized Bi 4 Ti 3 O 12 particles10.1143/JJAP.45.7385 ↗
12. An approach to analyzing synthesis, structure and properties of bismuth titanate ceramics10.2298/SOS0503199L ↗
13. Characterization of bismuth titanate powders10.4028/www.scientific.net/AMR.26-28.247 ↗
14. Mixed bismuth oxides with layer lattices. II. Structure of Bi4Ti3O12
15. Macedo · 2004 · vol. 24 · 2567
16. Microstructure, electrical conductivity, and piezoelectric properties of bismuth titanate10.1111/j.1151-2916.1996.tb08086.x ↗
17. Electrical anisotropy and a plausible explanation for dielectric anomaly of Bi4Ti3O12 single crystal10.1016/0025-5408(95)00161-1 ↗
18. Effect of isovalent lanthanide cations compensation for volatilized A-site bismuth in Aurivillius ferroelectric bismuth titanate10.1007/s10854-016-6102-0 ↗
19. Dielectric and electromechanical properties of textured niobium-doped bismuth titanate ceramics10.1111/j.1151-2916.2000.tb01157.x ↗
20. Stoichiometric control in Bi4Ti3O12 synthesis by novel hybrid solid state reaction10.1016/j.matlet.2018.03.130 ↗
21. Intermediate phases formation during the synthesis of Bi4Ti3O12 by solid state reaction10.1016/j.ceramint.2009.12.023 ↗
22. Self-propagation high-temperature synthesis of bismuth titanate10.1016/j.powtec.2003.11.005 ↗
23. Phase relations in the Bi2O3-TiO2 system10.1134/S0036023615050083 ↗
24. Nucleophilic stabilization of water-based reactive ink for titania-based thin film inkjet printing10.1016/j.jpcs.2016.10.004 ↗
25. Pechini · 1967
26. Bismuth solubility through binding by various organic compounds and naturally occurring soil organic matter10.1080/10934521003651465 ↗
27. Preparation of highly dispersed mixed oxides and oxide solid solutions by pyrolysis of amorphous organic precursors10.1111/j.1151-2916.1970.tb12003.x ↗
28. Preparation of Gd2O3-doped ZrO2 by polymeric precursor techniques10.1016/S0167-577X(01)00506-7 ↗
29. Synthesis of (Na0.5Bi0.5)TiO3 and (Na0.5Bi0.5)0.92Ba0.08TiO3 powders by a citrate method10.1007/s10853-006-0572-z ↗
30. Chemical synthesis of ceramic materials10.1039/a700881c ↗
31. Preparation and property–performance relationships in samarium-doped ceria nanopowders for solid oxide fuel cell electrolytes10.1016/j.jpowsour.2010.11.041 ↗
32. Haynes · 2016
33. A review on nanomaterials for environmental remediation10.1039/c2ee21818f ↗
34. Effects of second phase and defect on electrical properties in Bi0.5Na0.5-xKxTiO3 lead-free piezoelectric ceramics10.4028/www.scientific.net/AMR.284-286.1343 ↗
35. Structure–Property relationships in solid solutions of noncentrosymmetric Aurivillius phases, Bi 4– x La x Ti 3 O 12 ( x = 0–0.75)10.1021/ic301615f ↗
36. Synthesis and structural study of stoichiometric Bi2Ti2O7 pyrochlore10.1016/S0022-4596(03)00378-5 ↗
37. Structure and properties of Bi2Ti2O7 pyrochlore type phase stabilized by lithium10.1016/j.jallcom.2017.10.128 ↗
38. Doping effect on the dielectric property in bismuth titanate10.1063/1.1649456 ↗
39. Sintering behaviors of bismuth titanate synthesized by a coprecipitation method10.1016/j.matlet.2005.07.002 ↗
40. Effect of pressure of pelletization on dielectric properties of Bismuth Titanate prepared by sol-gel synthesis10.1016/j.apt.2017.11.011 ↗
41. Dielectric properties of Bismuth Titanate (Bi4Ti3O12) synthesized using solution combustion route10.1016/j.physb.2012.05.067 ↗
42. Synthesis of bismuth titanate with urea as fuel by solution combustion route and its dielectric and ferroelectric properties10.1016/j.ijleo.2013.07.066 ↗
43. Piezoelectricity and flexoelectricity of sodium bismuth titanate-based ceramics10.1016/j.ceramint.2019.09.184 ↗
44. Differences in nature of electrical conductions among Bi4Ti3O12-based ferroelectric polycrystalline ceramics10.1038/s41598-017-03266-y ↗
45. Estimation of ionic and hole conductivity in bismuth titanate polycrystals at high temperatures10.1016/j.ssi.2004.02.045 ↗
46. Remarkable piezoelectric activity and high electrical resistivity in Cu/Nb co-doped Bi4Ti3O12 high temperature piezoelectric ceramics10.1016/j.jeurceramsoc.2019.01.042 ↗
47. Barsoukov · 2005
48. Electromechanical dopant–defect interaction in acceptor-doped ceria10.1039/D0MA00563K ↗
49. Defect control for large remanent polarization in bismuth titanate ferroelectrics -- doping effect of higher-valent cations --10.1143/JJAP.39.L1259 ↗
50. Synthesis of bismuth titanate by the urea method10.1016/j.matlet.2004.10.038 ↗