journal article·2016-07Open access

Effect of ZrO2 content on ageing resistance and osteogenic cell differentiation of ZrO2–Al2O3 composite

María P. Albano, Heidy L. Calambás Pulgarin, Liliana B. Garrido, Emanuela Prado Ferraz, Adalberto L. Rosa, Paulo Tambasco de Oliveira

Ceramics International· Volume 42· Issue 9

Abstract

Abstract Two commercial 3 mol% yttria-partially stabilized zirconia powders, with 0.3 wt% Al 2 O 3 (YZA) and without Al 2 O 3 (YZ), were used to produce alumina (Al 2 O 3 )–zirconia (ZrO 2 ) slip cast composites. The influence of the ZrO 2 content and the ZrO 2 grain size on the ageing behavior of the different Al 2 O 3 –ZrO 2 composites was investigated. In addition, the in vitro biocompatibility and osteogenic cell differentiation of Al 2 O 3 –ZrO 2 surfaces were evaluated before ageing (ba) and after ageing (aa) using the rat bone marrow-derived osteoblast cell culture model; the osteogenic potential of preosteoblast MC3T3-E1 cells on the same surfaces was also assessed. The ageing susceptibility of the composites significantly increased with increasing the ZrO 2 content over 22 vol%. For ZrO 2 contents ≤22 vol%, the grain size did not influence the transformability of tetragonal ZrO 2 under ageing conditions; however, in the composites with 50 vol%, the greater grain size of 50 vol% YZ with respect to 50 vol% YZA enhanced the ageing degradation. Overall, the cell culture experiments revealed no significant differences among the composites before ageing in terms of osteogenic cell differentiation, except for the higher mineralization of bone marrow-derived osteoblast cells grown on 50 vol% YZ ba compared with the ones grown on 50 vol% YZA ba. The ageing process tended to rescue the osteogenic potential of these cells grown on 50 vol% YZA while inhibiting the one on 50 vol% YZ. In conclusion, the low ageing sensitive of the composites with ZrO 2 contents ≤22 vol% did not change the osteoblast biocompatibility, whereas the greater ageing degradation of the composites with 50 vol% ZrO 2 seemed to alter the osteogenic potential of bone marrow-derived osteoblast cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Orthopaedic implants and arthroplasty · Dental materials and restorations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Aqueous colloidal processing of ZTA composites10.1111/j.1551-2916.2008.02823.x ↗
2. Three different alumina–zirconia composites: Sintering, microstructure and mechanical properties10.1016/j.msea.2015.05.010 ↗
3. Microstructural investigation of the aging behavior of (3Y-TZP)–Al2O3 composites10.1111/j.1551-2916.2005.00221.x ↗
4. Ageing of dental zirconia ceramics10.1016/j.jeurceramsoc.2012.02.024 ↗
5. Slow-crack-growth behavior of zirconia-toughened alumina ceramics processed by different methods10.1111/j.1151-2916.2003.tb03287.x ↗
6. Effect of dopants and sintering temperature on microstructure and low temperature degradation of dental Y-TZP-zirconia10.1016/j.jeurceramsoc.2012.07.032 ↗
7. Critical effect of cubic phase on aging in 3 mol% yttria-stabilized zirconia ceramics for hip replacement prosthesis10.1016/j.biomaterials.2004.01.002 ↗
8. Analyzing microstructure by Rietveld refinement
9. Bone formation in vitro by stromal cells obtained from bone marrow of young adult rats10.1007/BF00225804 ↗
10. Effects of surface treatments on Y-TZP phase stability, microstructure and osteoblast cell response10.1016/j.ceramint.2015.07.047 ↗
11. In vitro osteogenesis on a microstructured titanium surface with additional submicron-scale topography10.1111/j.1600-0501.2006.01313.x ↗
12. Rapid colorimetric assay for cellular growth and survival: application to proliferation and cytotoxicity assays10.1016/0022-1759(83)90303-4 ↗
13. An Alizarin red-based assay of mineralization by adherent cells in culture: comparison with cetylpyridinium chloride extraction10.1016/j.ab.2004.02.002 ↗
14. 3Y-TZP ceramics with improved hydrothermal degradation resistance and fracture toughness10.1016/j.jeurceramsoc.2014.02.026 ↗
15. Transformation of yttria-doped zirconia polycrystals by annealing in water10.1111/j.1151-2916.1985.tb15239.x ↗
16. Low temperature degradation of yttria-stabilized tetragonal zirconia polycrystals under aqueous solutions10.1016/0022-3115(94)90271-2 ↗
17. Low-temperature degradation of different zirconia ceramics for dental applications10.1016/j.actbio.2011.11.016 ↗
18. Percolative mechanism of aging in zirconia-containing ceramics for medical applications10.1002/adma.200390117 ↗
19. Stabilized zirconia as a structural ceramic: an overview10.1016/j.dental.2007.05.005 ↗
20. Cubic-formation and grain-growth mechanisms in tetragonal zirconia polycrystal10.1111/j.1151-2916.2003.tb03483.x ↗
21. Modeling the aging kinetics of zirconia ceramics10.1016/j.jeurceramsoc.2003.11.025 ↗
22. Adhesion, proliferation and differentiation of osteoblasts on zirconia films prepared by cathodic arc deposition
23. In search of an osteoblast cell model for in vitro research10.22203/eCM.v024a01 ↗
24. The roles of titanium surface micro/nanotopography and wettability on the differential response of human osteoblast lineage cells10.1016/j.actbio.2012.12.002 ↗