Phase and structure formation mechanisms of SHS synthesized composite coatings
Source abstract
Abstract
Abstract High performance composite coatings were synthesized by self-propagation high-temperature synthesis followed by gravitational-separation process based on thermite reaction. The phase, structure and composition of generated composite coatings were investigated, and formation mechanism was studied by thermodynamic analysis. Results showed that phase composition of Al-Fe2O3 reaction system consisted of Al2O3, Fe and FeAl2O4. In Al-Fe2O3/Al-Cr2O3 composite reaction system, Fe-Cr alloy was formed and FeAl2O4 phase disappeared, which could improve the corrosion resistance of composite coatings. Furthermore, the addition of SiO2 in SHS reaction favored the formation of low-melting point phase Al2O3·SiO2, which filled into voids of Al2O3 dendrites and reduced the porosity of composite coatings, thus improving their strength and densification level. Moreover, the generated transition structure in different reaction systems could buffer the residual stress to promote the binding between the composite coating and steel pipe.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Combustion synthesis of refractory and hard materials: a review10.1016/j.ijrmhm.2012.09.002 ↗
2. Combustion synthesis of advanced materials10.1016/0079-6425(94)00011-5 ↗
3. Self-propagating high-temperature synthesis of powder-compared materials10.1007/BF00585421 ↗
4. Microstructure and mechanical propertied of multilayer-lined composite pipes prepared by SHS centrifugal-thermite process10.1016/j.msea.2006.12.016 ↗
5. Self-propagation exothermic reaction: the synthesis of high-temperature materials by combustion10.1016/0920-2307(89)90001-7 ↗
6. Corrosion-resistance of ceramic-lined pipes produced by SHS process
7. Coating technologies based on self-propagating high-temperature synthesis (SHS)
8. Study on microstructure and properties of ceramic-lined composite steel pipes produced by centrifugal-SHS process10.4028/www.scientific.net/KEM.464.434 ↗
9. Study on the structural analysis of Al2O3 ceramic-lined steel pipe prepared with the gravitational separation SHS method10.4028/www.scientific.net/KEM.759.59 ↗
10. Investigation on corrosion-resistance of double lined ceramic composite pipes produced by gravitational separation SHS process
11. Review on improving properties of gravitational SHS ceramic-lined composite pipe
12. Study on microstructure and process of ceramic lining prepared by gravitational SHS
13. Microstructure and mechanical propertied of multilayer-lined composite pipes prepared by SHS centrifugal-thermite process10.1016/j.msea.2006.12.016 ↗
14. Stress analysis of non-conventional composite pipes10.1016/j.compstruct.2005.11.054 ↗
15. Study on mechanisms of SHS transient liquid phase bonding between ceramics and metal in the composite pipes10.4028/www.scientific.net/MSF.423-425.305 ↗
16. Long ceramic-lined pipes with high resistance against corrosion, abrasion and thermal shock10.1080/10426919308934825 ↗
17. Microstructure evolution of ceramic materials during solidification from melts in high-gravity combustion synthesis10.1016/j.materresbull.2011.11.038 ↗
18. Ceramic composite pipes produced by a centrifugal-exothermic process
19. The influence of different additives on the kinetics of self-propagating high-temperature synthesis during the sintering process of Fe and Al elemental powders10.1016/j.intermet.2010.02.018 ↗
20. Study on the preparation of the ceramic composite-lined steel pipe with the SHS reaction system of Al-Fe2O3-Cr2O310.1016/j.ceramint.2017.05.153 ↗