Preparation and characterization of Li0.30Cr0.10Ni0.60O/polyvinylidene fluoride composites with high dielectric constants
Source abstract
Abstract
Abstract Lithium chromium nickel oxide (Li 0.30 Cr 0.10 Ni 0.60 O, LCNO) materials were prepared by sol-gel process and calcined at the temperature of 1000 °C for 3 h. Mechanical mixing process and hot pressing fabricated the composites between LCNO and polyvinylidene fluoride (PVDF). Effects of the amount of LCNO filler on the structure and dielectric properties of LCNO/PVDF composites were investigated. The LCNO/PVDF composites were characterized by thermogravimetric analysis (TGA), Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. Furthermore, the dielectric properties of the LCNO/PVDF composites were also investigated. From TGA results, the decomposition step of LCNO/PVDF composites depends on the LCNO content and weight loss decrease with increasing LCNO contents due to the presence of LCNO in PVDF. All LCNO/PVDF composites exhibited two-phase structures of cubic rock-salt NiO structure and α-, γ- phases of PVDF. It is revealed that dielectric constant of the polymer composite increases with increasing LCNO content. This might be due to the formation of micro-capacitor network. The LCNO/PVDF composite with amount of 30 wt% showed the best properties with a high dielectric constant of 59.27 and low loss tangent of 0.31 at the frequency of 1 kHz and at room temperature. The composite gave a high dielectric constant, which was 2.82 times higher than that of pure PVDF. Therefore, the flexible high dielectric constant and low loss tangent of the composite were weakly frequency dependent, which might be suitable for capacitor applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dielectric properties of ceramics · Dielectric materials and actuators · Ferroelectric and Piezoelectric Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Giant dielectric constant response in a copper-titanate10.1016/S0038-1098(00)00182-4 ↗
2. High dielectric constant in ACu3Ti4O12 and ACu3Ti3FeO12 phases10.1006/jssc.2000.8703 ↗
3. CaCu3Ti4O12: one-step internal barrier layer capacitor10.1063/1.1463211 ↗
4. Effects of sintering temperature on the internal barrier layer capacitor (IBLC) structure in CaCu3Ti4O12 (CCTO) ceramics10.1016/j.jeurceramsoc.2012.03.040 ↗
5. Giant dielectric permittivity observed in Li and Ti doped NiO10.1103/PhysRevLett.89.217601 ↗
6. Improvement in dielectric properties of Al2O3-doped Li0.30Cr0.02Ni0.68O ceramics10.1016/j.matlet.2010.12.059 ↗
7. Polarization of high-permittivity dielectric NiO-based ceramics10.1111/j.1551-2916.2005.00361.x ↗
8. Giant dielectric response in (Li, Ti)-doped NiO ceramics synthesized by the polymerized complex method10.1016/j.actamat.2006.12.024 ↗
9. Microstructure and dielectric properties of NaxTiyNi1−x−yO (x = 0.05-0.30, y = 0.02)10.1088/0022-3727/41/6/065403 ↗
10. Grain and grain boundary effects in high-permittivity dielectric NiO-based ceramics10.1063/1.2227636 ↗
11. The sintering temperature effects on the electrical and dielectric properties of Li0.05Ti0.02Ni0.93O ceramics prepared by a direct thermal decomposition method10.1063/1.2990768 ↗
12. Effect of calcining temperature on structural and dielectric properties of Li0.30Cr0.02Ni0.68O ceramics10.1016/j.jallcom.2013.10.200 ↗
13. High dielectric permittivity of Li and Ta codoped NiO ceramics10.1088/0022-3727/40/3/026 ↗
14. Influence of Cr doping on structure and dielectric properties of LixCryNi1−x−yO ceramics10.1016/j.ceramint.2014.08.119 ↗
15. High dielectric permittivity of Li and Sc co-doped NiO ceramics
16. Effects of K doping and annealing on the grain size and giant dielectric constant of KxTi0.02Ni0.98−xO ceramics10.1002/pssa.200622553 ↗
17. Moulson · 2003
18. Experimental and theoretical dielectric studies of PVDF/PZT nanocomposite thin films10.1016/j.ceramint.2011.01.037 ↗
19. Dielectric properties of poly(vinylidene fluoride)/CaCu3Ti4O12 composites10.1016/j.compscitech.2009.12.014 ↗
20. Dielectric properties of poly(vinylidene fluoride)/CaCu3Ti4O12 nanocrystal composite thick films10.3144/expresspolymlett.2010.78 ↗
21. Characterization and dielectric properties of modified Ba0.6Sr0.4TiO3/poly(vinylidene fluoride) composites with high dielectric tenability10.1016/j.compscitech.2015.08.013 ↗
22. Preparation and dielectric properties of poly(vinylidene fluoride)/Ba0.6Sr0.4TiO3 composites10.1016/j.jallcom.2014.09.005 ↗
23. Large dielectric constant and high thermal conductivity in poly(vinylidene fluoride)/barium titanate/silicon carbide three-phase nanocomposites10.1021/am2010459 ↗
24. Dielectric and structural features of the environmentally friendly lead-free PVDF/Ba0.3Na0.7Ti0.3Nb0.7O3 0-3 composite10.1016/j.cap.2016.08.016 ↗
25. Structural, dielectric and piezoelectric properties of 0-3 PZT/PVDF composites10.1016/j.ceramint.2015.02.148 ↗
26. Nano- and microsize effect of CCTO fillers on the dielectric behavior of CCTO/PVDF composites10.1016/j.actamat.2011.05.034 ↗
27. Effect of coupling agents on the dielectric properties of CaCu3Ti4O12/PVDF composites10.1016/j.compositesb.2013.02.006 ↗
28. Mechanical and dielectric properties of CaCu3Ti4O12 and La doped CaCu3Ti4O12 poly(vinylidene fluoride) composites10.1016/j.compscitech.2013.12.025 ↗
29. Study on dielectric behavior of ferroelectric poly(vinylidene fluoride)/Li and Ti codoped NiO composites10.1016/j.matlet.2006.04.109 ↗
30. Dielectric behavior of Li and Ti co-doped NiO/PVDF composites10.1016/S0009-2614(03)01004-2 ↗
31. Preparation and properties of polyimide/LTNO composite films with high dielectric constant10.1016/j.matlet.2005.03.024 ↗
32. Dielectric properties of LTNO ceramics and LTNO/PVDF composites10.1016/j.ceramint.2004.05.008 ↗
33. Low loss high dielectric permittivity of polyvinylidene fluoride and KxTiyNi1−x−yO (x = 0.05, y = 0.02) composites10.1063/1.3437633 ↗
34. Thermal, dielectric and mechanical study of poly(vinyl chloride)/olive pomace composites10.3144/expresspolymlett.2007.117 ↗
35. Dielectric properties and energy storage densities of poly(vinylidene fluoride) nanocomposite with surface hydroxylated cube shaped Ba0.6Sr0.4TiO3 nanoparticles10.3390/polym8020045 ↗
36. Ag-NBCTO-PVDF composites with enhanced dielectric properties10.1016/j.matlet.2016.08.136 ↗
37. Effect of filler size and concentration on the structure and properties of poly(vinylidene fluoride)/BaTiO3 nanocomposites10.1007/s10853-011-5916-7 ↗
38. Infrared spectra and characteristic frequencies of inorganic ions10.1021/ac60068a007 ↗
39. Facile synthesis of polycrystalline NiO nanorods assisted by microwave heating10.1111/j.1551-2916.2008.02667.x ↗
40. Unique Li0.3Ti0.02Ni0.68O-carbon nanotube hybrids: synthesis and their epoxy resin composites with remarkably higher dielectric constant and lower dielectric loss10.1016/j.jallcom.2014.03.007 ↗
41. Dielectric studies on hybridized PVDF-ZnO nanocomposites10.1080/17458080.2010.497947 ↗
42. H. Windlass, M.P. Raj, D. Balaraman, S.K. Bhattacharya, R.R. Tummala, Colloidal processing of polymer ceramic nanocomposites for integral capacitors, in: IEEE international symposium on advanced packaging materials: processes, properties and interfaces. GA (USA), Braselton, 2001, pp. 393–8.10.1109/ISAOM.2001.916608 ↗
43. Percolation threshold and electrical conductivity of a two-phase composite containing randomly oriented ellipsoidal inclusions10.1063/1.3671675 ↗