Microstructure and mechanical strength of Ti3AlC2 joints bonded using oxides as interlayer
Source abstract
Abstract
Abstract Ti3AlC2 ceramics were successfully joined with TiO2 and Nb2O5 respectively as interlayers via solid-state diffusion bonding at 1300 °C. The joints bonded with TiO2 and Nb2O5 exhibit distinct microstructures. Two continuous thin Al2O3 oxidation layers with a thickness around 1 μm were formed in the joints bonded with TiO2. Between the oxidation layers there exists a dense oxycarbide (TiC1-xOx) layer. For the joint bonded with Nb2O5, a dense bonding layer with Nb2AlC and Nb4AlC3 grains surrounded by thin Al2O3 oxidation layers at the grain boundaries were obtained. The shear strength of the final joints shows clear dependences on both the thickness and microstructure of the joints. Smaller joint thickness and the microstructure with complex phases favour for higher shear strength. Those result implies that bonding with oxides is a practical and efficient method for joining Ti3AlC2.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: MXene and MAX Phase Materials · Advanced ceramic materials synthesis · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Progress in research and development on MAX phases: a family of layered ternary compounds10.1179/1743280410Y.0000000001 ↗
2. Recent progress in theoretical prediction, preparation, and characterization of layered ternary transition-metal carbides10.1146/annurev-matsci-082908-145340 ↗
3. MAX phase carbides and nitrides: properties for future nuclear power plant in-core applications and neutron transmutation analysis10.1016/j.nucengdes.2011.12.009 ↗
4. Ab initio study of irradiation tolerance for different Mn+1AXn phases: Ti3SiC2 and Ti3AlC210.1063/1.4861384 ↗
5. Effects of neutron irradiation of Ti3SiC2 and Ti3AlC2 in the 121–1085 °C temperature range10.1016/j.jnucmat.2016.11.016 ↗
6. Radiation tolerance of Mn+1AXn phases, Ti3AlC2 and Ti3SiC210.1016/j.actamat.2010.04.029 ↗
7. Influence of water vapor on the oxidation behavior of Ti3AlC2 and Ti2AlC10.1016/j.scriptamat.2007.09.011 ↗
8. High-temperature oxidation and hot corrosion of Cr2AlC10.1016/j.actamat.2007.07.024 ↗
9. Improving the oxidation resistance of Ti3SiC2 by forming a Ti3Si0.9Al0.1C2 solid solution10.1016/j.actamat.2004.04.015 ↗
10. Deposition, characterization and high-temperature steam oxidation behavior of single-phase Ti2AlC-coated Zircaloy-410.1016/j.corsci.2018.02.035 ↗
11. A critical review of the oxidation of Ti2AlC, Ti3AlC2 and Cr2AlC in air10.1080/21663831.2013.806364 ↗
12. Opportunities for advanced ceramics and composites in the nuclear sector10.1111/jace.12406 ↗
13. Pressure-assisted combustion synthesis of dense layered Ti3AlC2 and its mechanical properties10.1111/j.1551-2916.2004.00012.x ↗
14. Rapid synthesis of dense Ti3SiC2 by spark plasma sintering10.1016/S0955-2219(02)00021-3 ↗
15. Joining of engineering ceramics10.1179/174328009X461078 ↗
16. Diffusion bonding of Ti3AlC2 ceramic via a Si interlayer10.1007/s10853-006-1491-8 ↗
17. Microstructure and mechanical strength of transient liquid phase bonded Ti3SiC2 joints using Al interlayer10.1016/j.jeurceramsoc.2007.01.012 ↗
18. Microstructure evolution and brazing mechanism of Ti2AlC–Ti2AlC joint by using pure-silver filler metal10.1016/j.ceramint.2015.03.040 ↗
19. Joining of Ti3SiC2 by magnetron sputtering a layer of Cu or Zr followed by heat treating at relatively low temperatures10.1111/j.1551-2916.2011.04566.x ↗
20. Rapid bonding of Ti3SiC2 and Ti3AlC2 by pulsed electrical current heating10.1111/jace.13323 ↗
21. Joining of Ti–Al–C ceramics by oxidation at low oxygen partial pressure10.1016/j.jeurceramsoc.2009.03.014 ↗
22. Micro-alloying effects of yttrium on the microstructure and strength of silicon carbide joint brazed with chromium-silicon eutectic alloy10.1016/j.jallcom.2017.12.137 ↗
23. Electronic and structural properties of the layered ternary carbide Ti3AlC210.1039/b101520f ↗
24. Stability and selective oxidation of aluminum in nano-laminate Ti3AlC2 upon heating in argon10.1021/cm030022v ↗
25. Microstructural evolution during high-temperature oxidation of Ti2AlC ceramics10.1016/j.actamat.2011.03.035 ↗
26. Negative thermal expansion behavior in single crystal and ceramic of Nb2O5-based compositions10.1063/1.1464232 ↗
27. Shear strength and shear failure of layered machinable Ti3AlC2 ceramics10.1016/S0955-2219(03)00328-5 ↗
28. Microstructures and adhesion of the oxide scale formed on titanium aluminum carbide substrates10.1111/j.1551-2916.2006.01141.x ↗
29. Microstructure and residual stress of alumina scale formed on Ti2AlC at high temperature in air10.1007/s11085-007-9063-0 ↗