Thermal insulation characteristics of roll forming alumina ball material
Source abstract
Abstract
Abstract Rolling ceramic thermal insulation balls have advantages of low cost, large output and easy control of particle size, so it is likely to become the main raw material for 3D printing in the future, but there is little research on its thermal insulation. In this study, we used three kinds of rolling aluminum oxide balls as raw materials to obtain single-granularity-level and multi-granularity-level bulk materials. And the effects of temperature, particle size, and thermal fatigue times on the thermal conductivity of the samples were analyzed. Additionally, the experimental results were verified by FloEFD heat conduction simulation software using finite analysis method to analyze their heat conduction characteristics. With the increase of temperature from 400 °C to 1500 °C, the thermal conductivity of single-granularity-level and multi-granularity-level bulk materials increased linearly. The thermal conductivity of single-granularity-level bulk materials have no direct relationship with the particle size, and the thermal conductivity of multi-granularity-level materials with small particle size difference was a bit lower than that of materials with large particle size difference, and a bit higher than that of materials with single-granularity-level. The simulation results showed that the main reason for the above phenomenon was that the point contact between particles played a dominating role in the heat transfer process. When the contact area increased, the thermal conductivity increased obviously, and the thermal conductivity with the increasing of temperature decreased in a quadratic curve. The improved model considering the shrinkage could improve accuracy of simulation results. Heat flux at the surface contact area was 10.19 times higher than that of the point contact and 15.10 times higher than that of the solid-gas contact at 400 °C. Therefore, reducing the surface contact area and increasing the porosity could significantly reduce the thermal conductivity of the materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aerogels and thermal insulation · Additive Manufacturing and 3D Printing Technologies · Polymer Foaming and Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Effect of titanium oxide addition on sintering performance of magnesia-rich magnesia-zirconia ceramics10.1016/j.ceramint.2020.05.304 ↗
2. Interfacial integration and roll forming of quasi-solid-state Li-O2 battery through solidification and gelation of ionic liquid10.1016/j.jpowsour.2020.228179 ↗
3. 3D printing of ceramics: a review10.1016/j.jeurceramsoc.2018.11.013 ↗
4. Fabrication of a ceramic/metal (Al2O3/Al) composite by 3D printing as an advanced refractory with enhanced electrical conductivity
5. Enhanced thermal conductivity of alumina and carbon fibre filled composites by 3-D printing10.1016/j.tca.2020.178649 ↗
6. 3D-printing of highly uniform CaSiO3 ceramic scaffolds: preparation, characterization and in vivo osteogenesis10.1039/c2jm30566f ↗
7. Experimental research on thermal insulation performance of lightweight ceramic material in oxidation environment up to 1700°C10.1016/j.ceramint.2015.10.129 ↗
8. Measurement and model on thermal conductivities of carbon nanotube nanorefrigerants10.1016/j.ijthermalsci.2008.11.012 ↗
9. Thermal conductivity measurements and modeling of ceramic fiber insulation materials10.1016/j.ijheatmasstransfer.2018.10.060 ↗
10. Thermal conductivities study on silica aerogel and its composite insulation materials10.1016/j.ijheatmasstransfer.2011.02.026 ↗
11. Effect of particle size of fly ash on the properties of lightweight insulation material10.1016/j.conbuildmat.2016.06.140 ↗
12. Yttria-stabilized zirconia–alumina composite sintering temperature effect on thermal diffusivity10.1007/s10973-016-5788-9 ↗
13. Refractories containing fused and sintered alumina aggregates: investigations on processing, particle size distribution and particle morphology10.1016/j.ceramint.2016.12.067 ↗
14. Effect of core-shell microspheres as pore-forming agent on the properties of porous alumina ceramics10.1016/j.matdes.2016.10.043 ↗
15. Preparation of nanostructured YSZ granules by the spray drying method10.1016/j.ceramint.2013.09.050 ↗
16. Thermal conductivity of traditional ceramics Part II: influence of mineralogical composition10.1016/j.ceramint.2010.05.013 ↗
17. The influence of microstructure on the thermal conductivity of aluminium nitride10.1007/BF01151092 ↗
18. Thermal conductivity: XIII, effect of microstructure on conductivity of single‐phase ceramics10.1111/j.1151-2916.1957.tb12627.x ↗
19. The impact of changes in thermal conductivity of polystyrene insulation material under different operating temperatures on the heat transfer through the building envelope10.1016/j.applthermaleng.2016.03.065 ↗
20. A review of thermal conductivity of various nanofluids10.1016/j.molliq.2018.05.124 ↗
21. Experimental research on thermal insulation performance of lightweight ceramic material in oxidation environment up to 1700 °C10.1016/j.ceramint.2015.10.129 ↗
22. Thermal characterization of Al2O3 and ZnO reinforced silicone rubber as thermal pads for heat dissipation purposes10.1016/j.tca.2004.12.024 ↗
23. Impact of wind speed on ventilation performance within a container installed with photovoltaic inverter10.1016/j.renene.2017.07.031 ↗
24. Investigation on thermal characterization of low power SMD LED mounted on different substrate packages10.1016/j.applthermaleng.2016.02.092 ↗
25. Numerical study and optimizing on cold plate splitter for lithium battery thermal management system10.1016/j.applthermaleng.2019.114787 ↗
26. Numerical investigation on a lithium ion battery thermal management utilizing a serpentine-channel liquid cooling plate exchanger10.1016/j.ijheatmasstransfer.2019.07.033 ↗
27. Computational investigation of factors affecting thermal conductivity in a particulate filled composite using finite element method
28. A simplified finite volume method for effective thermal conductivity in discrete particles10.1016/j.powtec.2020.07.060 ↗
29. Evaluated material properties for a sintered-alumina10.1111/j.1151-2916.1997.tb03074.x ↗
30. Lin · 1993 · 160
31. Effect of core-shell microspheres as pore-forming agent on the properties of porous alumina ceramics10.1016/j.matdes.2016.10.043 ↗
32. Thermal conductivity and microstructure characterisation of lightweight alumina and alumina−mullite ceramics10.1016/j.jeurceramsoc.2015.12.026 ↗
33. Thermal conductivity of microporous layers: analytical modeling and experimental validation10.1016/j.jpowsour.2015.07.054 ↗