Friction materials inspired by characteristics of bio-based silica and its hardening process
Source abstract
Abstract
Abstract Designing and developing composites with excellent mechanical, friction, and durability properties at low cost has long been highly desirable for the applications of friction materials. Herein, we employed a cost-effective method to obtain bio-based silica (RHC-SiO2) from gasified rice husk carbon (RHC). Subsequently, inspired by the characteristics of RHC-SiO2 and its hardening process, we report a simple and efficient so-called “hybrid pressing and sintering molding” method for manufacturing copper-based friction materials (CFMs). The CFM-R4 (CFM with 4% RHC-SiO2) possesses a unique combination of high hardness (55.50 H V), low density (0.62 g/cm3), low wear rate (0.081%), suitable friction coefficient (0.26), and good durability. Based on the cost-effective method, the increased and decreased stages of RHC-SiO2 yield were determined mainly by reaction rate and compatibility, respectively. Compared with CFM-0 (CFM without SiO2), the CFM with RHC-SiO2 possesses better mechanical and friction properties. In view of high-performance and eco-friendly, such CFM with RHC-SiO2 would hold a promising application in friction fields such as transmission, differential, and synchronizer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Brake Systems and Friction Analysis · Tribology and Wear Analysis · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (75)
Show source-provided references
1. The conflicts between strength and toughness10.1038/nmat3115 ↗
2. Synthetic nacre by predesigned matrix-directed mineralization10.1126/science.aaf8991 ↗
3. An all-natural bioinspired structural material for plastic replacement10.1038/s41467-020-19174-1 ↗
4. Preparation and gas-sensing performance of GO/SnO2/NiO gas-sensitive composite materials10.1016/j.ceramint.2020.10.257 ↗
5. Bio-based ultra-lightweigh concrete applying miscanthus fibers: acoustic absorption and thermal insulation10.1016/j.cemconcomp.2020.103829 ↗
6. Investigation of structural and magnetic properties of NixZn1-xFe2O4/SiO2 (0≤x≤1) spinel-based nanocomposites
7. SiO2 coated platy TiO2 designed for noble UV/IR-shielding materials10.1016/j.ceramint.2019.05.231 ↗
8. Influence of ferrite to silica ratio and thermal treatment on porosity, surface, microstructure and magnetic properties of Zn0.5Ni0.5Fe2O4/SiO2 nanocomposites10.1016/j.jallcom.2020.154409 ↗
9. Influence of Cu2+, Ni2+, and Zn2+ ions doping on the structure, morphology, and magnetic properties of Co-ferrite embedded in SiO2 matrix obtained by an innovative sol-gel route10.3390/nano10030580 ↗
10. The size effect of SiO2 particles on friction mechanisms of a composite friction material10.1007/s11249-018-0987-0 ↗
11. Densification behaviour and wear performance of brass-based composite reinforced with SiO2 nanoparticles: switchable water pump clutch application10.1007/s11249-019-1154-y ↗
12. Microstructure, porosity and magnetic properties of Zn0.5Co0.5Fe2O4/SiO2 nanocomposites prepared by sol-gel method using different polyols
13. Synthesis of amorphous magnesium silicates with different SiO2: MgO molar ratios at laboratory and pilot plant scales10.1016/j.micromeso.2021.110946 ↗
14. Synthesis and catalytic activity of chrysotile-type magnesium silicate nanotubes using various silicate sources-sciencedirect10.1016/j.micromeso.2018.07.041 ↗
15. Black SiO2 nanoparticles obtained by pyrolysis of rice husk10.1016/j.dyepig.2019.01.030 ↗
16. Influence of sodium peroxide during the synthesis of SiO2 obtained from rice husk10.1016/j.mssp.2020.105087 ↗
17. Life cycle assessment of rice husk torrefaction and prospects for decentralized facilities at rice mills10.1016/j.jclepro.2020.123177 ↗
18. In-depth study of rice husk torrefaction: characterization of solid, liquid and gaseous products, oxygen migration and energy yield10.1016/j.biortech.2018.01.009 ↗
19. Pyrolysis characteristics, kinetics, and its product characteristics of grape stem10.15376/biores.14.4.7901-7919 ↗
20. Biochar catalyzing polymerization of the volatiles from pyrolysis of poplar wood
21. Review processing, properties and applications of reactive silica from rice husk-an overview10.1023/A:1025157114800 ↗
22. Rice husk as a fibre in composites: a review10.1515/jmbm-2020-0015 ↗
23. A comparative investigation of the unit cost for the preparation of modified sand and clay bricks from rice husk waste10.1016/j.jobe.2020.101765 ↗
24. Effects of torrefaction on the pyrolysis behavior and bio-oil properties of rice husk by using TG-FTIR and Py-GC/MS10.1021/ef501189p ↗
25. Rsm-optimized slow pyrolysis of rice husk for bio-oil production and its upgradation10.1016/j.energy.2021.120161 ↗
26. Microstructural, mechanical, and tribological properties of rice husk-based carbon: effect of carbonizing temperature
27. Experimental study on microscopic wear mechanism of copper/carbon/rice bran ceramics composites10.1016/j.wear.2012.07.004 ↗
28. Preparation and tribological properties of SiC/rice bran carbon composite ceramics10.1557/jmr.2005.0427 ↗
29. Friction and wear properties of rice husk ceramics under dry condition10.1007/s12206-009-1167-9 ↗
30. Sliding properties of rice husk-derived carbon/silica composite10.5188/jsmerj.24.31 ↗
31. Eco-friendly synthesis of nanostructured mesoporous materials from natural source rice husk silica for environmental applications
32. Preparation of a novel polysulfone membrane by incorporated with carbon dots grafted silica from rice husk for dye removal10.1016/j.jwpe.2020.101805 ↗
33. Rice husk derived aminated silica for the efficient adsorption of different gases10.1038/s41598-020-76460-0 ↗
34. Agricultural solid waste as source of supplementary cementitious materials in developing countries10.3390/ma12071112 ↗
35. Paraquat adsorption on porous materials synthesized from rice husk silica10.2166/wst.2013.311 ↗
36. Insights into the CO2 capture over amine-functionalized mesoporous silica adsorbents derived from rice husk ash10.1016/j.jece.2020.104362 ↗
37. Homopiperazine grafted mesoporous silicas from rice husk ash for CO2 adsorption10.1166/jnn.2014.8240 ↗
38. Gasification of rice husk in two-stage gasifier to produce syngas, silica and activated carbon10.1080/15567036.2017.1423418 ↗
39. Gasified rice husk based RHAC/NiCo2S4 composite for high performance asymmetric supercapacitor10.1016/j.jallcom.2019.152073 ↗
40. Extraction of SiO2 from gasified rice husk carbon simultaneously rice husk activated carbon production: restudy on product properties, activation mechanism, and evolution law of pore structure10.1016/j.egyr.2020.11.031 ↗
41. A simple flash carbonization route for conversion of biomass to porous carbons with high CO2 storage capacity10.1039/C8TA04409K ↗
42. Palm kernel shell activated carbon as an inorganic framework for shape-stabilized phase change material10.3390/nano8090689 ↗
43. The feasible visual laboratory investigation of formate fluids on the rheological properties of a shale formation10.1007/s13762-018-1877-6 ↗
44. Recommendations for compatibility of different types of polymers with potassium/sodium formate-based fluids for drilling operations: an experimental comparative analysis
45. Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report)10.1515/pac-2014-1117 ↗
46. Activated carbon derived from Japanese distilled liquor waste: application as the electrode active material of electric double-layer capacitors10.1016/j.jclepro.2020.120822 ↗
47. A composite material with CeO2-ZrO2 nanocrystallines embedded in SiO2 matrices and its enhanced thermal stability and oxygen storage capacity10.1007/s11051-018-4255-x ↗
48. Preparation of monodispersed microporous SiO2 microspheres with high specific surface area using dodecylamine as a hydrolysis catalyst10.1016/j.jssc.2005.10.036 ↗
49. A cationic surfactant assisted selective etching strategy to hollow mesoporous silica spheres10.1039/c0nr00893a ↗
50. The synthesis of HKUST-1/SiO2 composite material based on 3D printing10.1016/j.inoche.2020.107975 ↗
51. Fabricating the superhydrophobic nickel and improving its antifriction performance by the laser surface texturing10.3390/ma12071155 ↗
52. Titanium boride equation of state determined by in-situ X-ray diffraction10.1016/j.heliyon.2016.e00220 ↗
53. Room-temperature fabricated thin-Film transistors based on compounds with lanthanum and main family element boron10.3390/molecules23061373 ↗
54. Computational and experimental investigation of micro-hardness and wear resistance of Ni-Based alloy and TiC composite coating obtained by laser cladding10.3390/ma12050793 ↗
55. Tribological behaviour of SiC particle-reinforced copper matrix composites10.1016/S0167-577X(99)00273-6 ↗
56. Properties of copper reinforced by laser-generated Al2O3-nanoparticles
57. Natural rubber nanocomposite reinforced with nano silica10.1002/pen.20997 ↗
58. Dynamic characteristics study for surface composite of AMMNCs matrix fabricated by friction stir process10.3390/ma11071240 ↗
59. The application of sewage sludge as an expanding agent in the production of lightweight expanded clay aggregate mass10.1080/09593330.2010.540716 ↗
60. Microstructure, wear and friction behavior of nanocomposite materials with natural ingredients10.1016/j.triboint.2018.10.040 ↗
61. Microstructure transformation on pre-quenched and ultrafast-tempered high-strength multiphase steels10.3390/ma12030396 ↗
62. Effect of milling on the mechanical properties of chopped SiC fiber-reinforced ZrB210.3390/ma6051980 ↗
63. The correlation of microstructure and mechanical properties of in-situ Al-Mg2Si cast composite processed by equal channel angular pressing10.3390/ma12091553 ↗
64. Effects of WO3 electrode microstructure on NO2-sensing properties for a potentiometric sensor10.1098/rsos.190526 ↗
65. Evolution mechanism of photonically sintered nano-silver conductive patterns10.3390/nano9020258 ↗
66. Influence of Mn on the iron-based friction material directly prepared by in situ carbothermic reaction from vanadium-bearing titanomagnetite concentrates10.1039/C8RA05307C ↗
67. Tribological properties of molybdenum disulfide and helical carbon nanotube modified epoxy resin10.3390/ma12060903 ↗
68. Fabrication of homogeneous mo-cu composites using spherical molybdenum powders prepared by thermal plasma spheroidization process10.1016/j.ijrmhm.2018.01.022 ↗
69. Tribological and mechanical behavior of multilayer Cu/SiC + Gr hybrid composites for brake friction material applications10.1016/j.wear.2014.06.006 ↗
70. Effects of cast-iron surface texturing on the anti-scuffing performance under starved lubrication10.3390/ma12101586 ↗
71. Effect of adhesion on mechanical and tribological properties of glass fiber composites, based on ultra-high molecular weight polyethylene powders with various initial particle sizes10.3390/ma13071602 ↗
72. Effect of pore structure on mechanical and tribological properties of paper-based friction materials10.1016/j.triboint.2020.106307 ↗
73. Research on the relationship between macroscopic and mesoscopic mechanical parameters of limestone based on hertz mindlin with bonding model10.1007/s40948-020-00184-8 ↗
74. Effects of steel fibers and surface roughness on squealing behavior of friction materials
75. Investigation on mechanical, wear, and machining characteristics of Al 7075/MWCNTs using the liquid state method10.1007/s42114-020-00156-2 ↗