Enhancement of mechanical properties of Os0.9Re0.1B2 ceramics via buried boron powder assisted sintering
Source abstract
Abstract
Abstract As a new type of hard/super-hard materials, the consolidation of transition metal borides is very critical for obtaining bulk ceramics with excellent properties. In the present work, buried boron powder assisted pressures-less sintering was applied for preparation of Os 0.9 Re 0.1 B 2 ceramics with the aim for mechanical properties improvement. Os 0.9 Re 0.1 B 2 powders were firstly synthesized via mechanochemical technique with moral ratios of (Os + Re):B = 1:2.5 and 1:2.25, respectively. Bulk samples were then consolidated using buried powder sintering and exposed sintering, respectively, for comparison. The influence of buried boron powder sintering on the phase composition, microstructure, and mechanical properties (micro-hardness, nano-hardness, and Young's modulus) of Os 0.9 Re 0.1 B 2 ceramic samples were investigated. The results show that by employing buried powder sintering, B powders surrounded the sample during the sintering process, which on the one hand, inhibited decomposition of Os 0.9 Re 0.1 B 2 to (Os 0.9 Re 0.1 ) 2 B 3 , while on the other hand, decreased the grain size of the sample. Further, a columnar to equiaxial transition for the grains was found with grain size decreased when (Os + Re):B = 1:2.25. The samples prepared with buried powder sintering have higher mechanical properties as compared with those prepared with exposed sintering. The sample prepared from (Os + Re): B = 1:2.25 by buried powder sintering had the best mechanical properties among the four studied samples, along with the smallest grain size. The mechanical properties of the samples were greatly influenced by the grain size and relative density.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Diamond and Carbon-based Materials Research · Boron and Carbon Nanomaterials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Electronic and structural origin of ultra-compressibility of 5d transition metal diborides MB2 (M=W, Re, Os)
2. Advancements in the search for superhard ultra-incompressible metal borides10.1002/adfm.200901257 ↗
3. Investigation of the high pressure synthesized osmium carbide by experimental and computational techniques
4. Synthesis of ultra-incompressible superhard rhenium diboride at ambient pressure10.1126/science.1139322 ↗
5. Transition metal borides: superhard versus ultra-incompressible10.1002/adma.200703025 ↗
6. A new superhard material: osimium diboride OsB210.1016/j.ssc.2006.05.041 ↗
7. OsB2 and RuB2, ultra-incompressible, hard materials: first-principles electronic structure calculations10.1016/j.cplett.2006.05.055 ↗
8. Osmium diboride, an ultra-incompressible, hard material10.1021/ja043806y ↗
9. Is osimium diboride an ultra-hard material?10.1021/ja801520v ↗
10. Hexagonal OsB2: sintering, microstructure and mechanical properties10.1016/j.jallcom.2015.01.291 ↗
11. Novle high pressure hexagonal OsB2 by mechanochemistry10.1016/j.jssc.2014.03.020 ↗
12. Synthesis of osmium borides by mechnochemical method10.1111/jace.14785 ↗
13. Effects of Re addition on phase stability and mechanical properties of hexagonal OsB210.1111/jace.15219 ↗
14. Thermal stability and hardness of ReB2 type hexagonal OsB2 with the addition of W10.1016/j.ceramint.2018.06.029 ↗