Experimental estimation of the Lorenz number and scattering parameter for p-type bismuth antimony telluride via multiple doping under constant temperature conditions
Source abstract
Abstract
The effects of the addition of lead as one of the multiple dopants in p-type Bi0.3−xSb1.7Te3.0+0.01Pbx (x = 0, 0.001, 0.002, 0.003) fabricated by mechanical alloying followed by hot pressing were investigated. Measurements by X-ray diffraction (XRD), differential thermal analysis (DTA), and scanning electron microscopy (SEM) showed the same matrix morphology. The second phase by doped elements was not confirmed by transmission electron microscopy (TEM). By using the lead addition results and previously studied tellurium doping effects, the Lorenz number L was evaluated to be 0.73–1.18 × 10−8 W S−1 K−2. The scattering parameter γ and reduced Fermi energy η were estimated by using expressions on the basis of a one-electron approximation, measured Seebeck coefficients, and the estimated L at room temperature. The γ ranged approximately from −1.06 to −0.60 and showed a mutual effect of acoustic and optical phonon scattering. The relationship between a dimensionless figure of merit ZT and η was clarified. The optimum η was determined as −1.25 at ZT = 1.26. From these results, multi-doped Bi0.3Sb1.7Te3.0 could be applied to evaluate L, γ, and η at a constant temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · Thermal Expansion and Ionic Conductivity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Thermoelectric cooling and power generation10.1126/science.285.5428.703 ↗
2. Thermoelectric devices for power generation: recent progress and future challenges10.1002/adem.201500333 ↗
3. Solar energy: the thermoelectric alternative10.1038/nmat3057 ↗
4. Lattice distortion and anisotropic thermoelectric properties in hot-deformed CuI-doped Bi2Te2·7Se0.310.1016/j.jallcom.2019.152649 ↗
5. Effective phonon scattering and enhancement of thermoelectric performance in Ga-excess Bi0.4Sb1.6Te3 compounds10.1016/j.cap.2020.06.024 ↗
6. Influence of copper telluride nanodomains on the transport properties of n-type bismuth telluride10.1016/j.cej.2021.129374 ↗
7. The critical point of average grain size in phonon thermal conductivity of fine-grained undoped lead telluride10.2320/matertrans.MT-M2020069 ↗
8. Preparation and thermoelectric properties of microcrystalline lead telluride10.1134/S0020168520080063 ↗
9. Multiple doped ZnO with enhanced thermoelectric properties10.1016/j.jeurceramsoc.2021.01.054 ↗
10. Two–step processing of thermoelectric (Ca0.9Ag0.1)3Co4O9/nano–sized Ag composites with high ZT10.1016/j.jeurceramsoc.2019.04.004 ↗
11. High entropy alloy on single sub-lattice in MNiSn compound: stability and thermoelectric properties
12. High thermoelectric performance of p-type half-Heusler (Hf,Ti)Co(Sb,Sn) solid solutions fabricated by mechanical alloying10.1016/j.jallcom.2020.158330 ↗
13. Higher thermoelectric performance of Zintl phases (Eu0.5Yb0.5)1−xCaxMg2Bi2 by band engineering and strain fluctuation10.1073/pnas.1608794113 ↗
14. Thermoelectric properties of Zn-doped Ca5In2Sb610.1039/c3dt50428j ↗
15. New trends, strategies and opportunities in thermoelectric materials: a perspective10.1016/j.mtphys.2017.06.001 ↗
16. Valence band structure and the thermoelectric figure-of-merit of (Bi1-xSbx)2Te3 crystals
17. Carrier concentration dependence of thermal conductivity of iodine-doped n-type PbTe10.2320/matertrans1989.41.1282 ↗
18. Characterization of Lorenz number with Seebeck coefficient measurement10.1063/1.4908244 ↗
19. Mobility of electrons and holes in PbS, PbSe, and PbTe between room temperature and 4.2°K10.1103/PhysRev.111.1029 ↗
20. Analysis of lattice and ionized impurity scattering in p-type germanium10.1103/PhysRev.127.1593 ↗
21. Noals · 2001 · 111
22. Thermoelectric properties and scattering factors of finely grained Bi2Te3-related materials prepared by mechanical alloying10.2320/jinstmet.74.623 ↗
23. A review on bismuth telluride (Bi2Te3) nanostructure for thermoelectric applications10.1016/j.rser.2017.10.112 ↗
24. Thermoelectric properties of bismuth antimony telluride solid solutions
25. Mechanical alloying of BiTe and BiSbTe thermoelectric materials10.2320/matertrans1989.35.428 ↗
26. Enhanced thermoelectric figure-of-merit in p-type nanostructured bismuth antimony tellurium alloys made from elemental chunks10.1021/nl8009928 ↗
27. Synthesis of nanocrystalline Bi2Te3 via mechanical alloying10.1016/j.jmatprotec.2008.01.027 ↗
28. Shift of tellurium solid-solubility limit and enhanced thermoelectric performance of bismuth antimony telluride milled with yttria-stabilized zirconia balls and vessels10.1016/j.jeurceramsoc.2021.09.019 ↗
29. Thermoelectric Cu-doped (Bi,Sb)2Te3 : performance enhancement and stability against high electric current pulse10.1016/j.nanoen.2019.04.021 ↗
30. Band engineering and tuning thermoelectric transport properties of p-type Bi0.52Sb1.48Te3 by Pb doping for low-temperature power generation10.1016/j.scriptamat.2017.10.009 ↗
31. Precise regulation of carrier concentration in thermoelectric BiSbTe alloys via magnetic doping10.1021/acsami.0c02408 ↗
32. Thermoelectric properties of alumina-doped Bi0.4Sb1.6Te3 nanocomposites prepared through mechanical alloying and vacuum hot pressing10.3390/en81112323 ↗
33. Effects of Ce, Y, and Sm doping on the thermoelectric properties of Bi2Te3 alloy10.1016/j.pnsc.2013.06.007 ↗
34. Enhancing room temperature thermoelectric performance of n-type polycrystalline bismuth-telluride-based alloys via Ag doping and hot deformation10.1016/j.mtphys.2017.09.001 ↗
35. Spark plasma sintered bismuth telluride-based thermoelectric materials incorporating dispersed boron carbide10.1016/j.jallcom.2014.12.010 ↗
36. Thermoelectric characteristics of the (Bi,Sb)2(Te,Se)3 nanocomposites processed with nanoparticle dispersion10.1016/j.ceramint.2011.05.069 ↗
37. Thermoelectric properties of BiSbTe/graphene nanocomposites10.1007/s10854-019-01538-z ↗
38. Effect of nano-SiC dispersion on thermoelectric properties of Bi2Te3 polycrystals10.1002/pssa.200622011 ↗
39. Synergistic modulation of mobility and thermal conductivity in (Bi,Sb)2Te3 towards high thermoelectric performance10.1039/C8EE03225D ↗
40. Thermoelectric transport enhancement of Te-rich bismuth antimony telluride (Bi0.5Sb1.5Te3+x) through controlled porosity
41. Improvement in thermoelectric properties of n-type bismuth telluride nanopowders by hydrogen reduction treatment
42. Development of p-type Bi2−xSbxTe3 thermoelectric materials for power generation application exploiting synergetic effect of Sb alloying and repress process10.1016/j.apsusc.2019.145236 ↗
43. Effect of mechanical alloying on thermal conductivity of Bi2Te3-Sb2Te310.2320/matertrans.M2016169 ↗
44. Uemura · 1988
45. Synthesis and thermoelectric properties of bismuth antimony telluride thermoelectric materials fabricated at various ball-milling speeds with yttria-stabilized zirconia ceramic vessel and balls10.1016/j.ceramint.2020.02.180 ↗
46. Shifting up the optimum figure of merit of p-type bismuth telluride-based thermoelectric materials for power generation by suppressing intrinsic conduction10.1038/am.2013.86 ↗
47. High performance n-type bismuth telluride based alloys for mid-temperature power generation10.1039/C5TC02263K ↗
48. Constituent element addition to n-type Bi2Te2.67Se0.33 thermoelectric semiconductor without harmful dopants by mechanical alloying10.2320/matertrans.M2016031 ↗
49. BiSbTe-based nanocomposites with high ZT: the effect of SiC nanodispersion on thermoelectric properties10.1002/adfm.201300146 ↗
50. Reduction of thermal conductivity in Al2O3 dispersed p-type bismuth antimony telluride composites10.1016/j.matchemphys.2019.05.023 ↗
51. Experimental determination of the Lorenz number in Cu0.01Bi2Te2.7Se0.3 and Bi0.88Sb0.1210.1103/PhysRevB.85.205410 ↗
52. Experimental determination of lattice thermal conductivity and Lorenz number as functions of temperature for n-type PbTe10.1016/j.mtphys.2018.05.005 ↗
53. Finite element thermomechanical modeling of large area thermoelectric generators based on bismuth telluride alloys10.1007/s11664-009-1049-z ↗
54. Surface texture of Bi2Te3-based materials deformed under pressure-current heating
55. Highly oriented crystal growth of nanocrystalline bismuth telluride thin films with anisotropic thermoelectric properties using two-step treatment10.1016/j.jallcom.2016.12.284 ↗
56. Thermoelectric properties of CuyBixSb2-x-yTe3 alloys fabricated by mechanical alloying and spark plasma sintering10.1016/j.intermet.2012.02.018 ↗
57. Measurement of seebeck coefficient and conductive behaviors of Bi2Te3-xSex (x = 0.15–0.6) thermoelectric semiconductors without harmful dopants10.2320/matertrans.MB201301 ↗
58. Development of a Seebeck coefficient standard reference material10.1007/s00339-009-5191-5 ↗
59. Carbon observation by electron energy-loss spectroscopy and thermoelectric properties of graphite added bismuth antimony telluride prepared by mechanical alloying-hot pressing10.1016/j.intermet.2019.03.005 ↗
60. Tritt · 2004
61. Enhanced thermoelectric performance of Bi0.3Sb1.7Te3 based alloys by dispersing TiC ceramic nanoparticles10.1016/j.jallcom.2020.158376 ↗
62. Thermoelectric behaviors of Bi0.3Sb1.7Te3.0 with excess or deficiency of tellurium prepared by mechanical alloying followed by hot pressing10.2320/matertrans.MF201704 ↗
63. Direct measurement of density-of-states effective mass and scattering parameter in transparent conducting oxides using second-order transport phenomena10.1116/1.1290372 ↗
64. Electrical and thermal properties of Bi2Te310.1103/PhysRev.108.1164 ↗