journal article·2024-07Open access

Ultrafast processing of zirconia ceramics by transient and selective laser absorption

Yanming Zhang, Chaoran Wei, Tomohiro Fukui, Naohiko Sugita, Yusuke Ito

Ceramics International· Volume 50· Issue 14

Abstract

Ultrashort-pulse lasers (USPLs) are used in the machining of zirconia ceramics (ZrO2) because of their extremely high peak intensities. However, highly efficient and high precision microprocessing of ZrO2 remains challenging. In this study, we applied a transient and selective laser (TSL) processing technique by combining a USPL and a continuous-wave (CW) laser to realize ultrafast drilling of opaque ZrO2. Ultra-high-efficiency TSL drilling of ZrO2 was achieved with a processing efficiency 1800 times higher than that of USPL drilling. The material removal mechanism, hole formation process, and parameter dependence of TSL drilling were revealed by direct observation of the internal processing phenomenon on a timescale of microseconds. The variations in the processed surface characteristics, including surface morphology, elemental composition, and phase composition, are also presented. Subsequently, the effect of different excited electron regions occurring in the picosecond timescale induced by the USPL on the TSL drilling performance is discussed. Finally, the repeatability and stability of the TSL processing were verified by fabricating microarrays of different sizes. This study will contribute to revealing the ultrafast processing mechanisms of TSL processing in ZrO2 microfabrication. Furthermore, this technique can significantly broaden the applications of ZrO2 in the advanced electronic industry by greatly improving the microprocessing efficiency.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Laser Material Processing Techniques · Advanced Surface Polishing Techniques · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Laser drilling in gas turbine blades: shaping of holes in ceramic and metallic coatings10.1002/latj.201190024 ↗
2. Are ceramic implants a viable alternative to titanium implants? A systematic literature review10.1111/j.1600-0501.2009.01785.x ↗
3. Micro-machining of metals, ceramics and polymers using nanosecond lasers10.1007/s00170-007-0967-2 ↗
4. Femtosecond laser multi-patterning of zirconia for screening of cell-surface interactions10.1016/j.jeurceramsoc.2017.08.019 ↗
5. Research on theoretical model of combined micro-machining of laser and electrolysis of thermal barrier coated turbine blade film cooling holes10.20964/2016.11.38 ↗
6. Investigation of material removal characteristics in EDM of nonconductive ZrO2 ceramic10.1016/j.proeng.2013.03.180 ↗
7. Study on cutting force model in ultrasonic vibration assisted side grinding of zirconia ceramics10.1016/j.ijmachtools.2016.01.004 ↗
8. Gamaly · 2011
9. REffect of surface modification by femtosecond laser on zirconia based ceramics for screening of cell-surface interaction10.1016/j.apsusc.2020.145914 ↗
10. Mechanism and morphology control of underwater femtosecond laser microgrooving of silicon carbide ceramics10.1364/OE.27.026264 ↗
11. Ultrashort pulsed laser ablation of zirconia-alumina composites for implant applications10.1016/j.jmatprotec.2021.117335 ↗
12. Low temperature degradation of laser patterned 3Y-TZP: enhancement of resistance after thermal treatment10.1016/j.jeurceramsoc.2017.10.044 ↗
13. Effect of surface modification by femtosecond laser on zirconia based ceramics for screening of cell-surface interaction10.1016/j.apsusc.2020.145914 ↗
14. Multiple-beam laser patterning on aluminum oxide, zirconium oxide, and hydroxyapatite ceramic materials using a microlens array10.2351/1.4955158 ↗
15. Laser processing of alumina ceramic by spatially and temporally superposing the millisecond pulse and nanosecond pulse train10.1364/OE.381605 ↗
16. Nanosecond-millisecond combined pulse laser drilling of alumina ceramic10.1364/OL.383207 ↗
17. Numerical study of the dynamics of the hole formation during drilling with combined ms and ns laser pulses10.1016/j.optlastec.2018.10.057 ↗
18. Combined pulse laser: reliable tool for high-quality, high-efficiency material processing10.1016/j.optlastec.2022.108209 ↗
19. Crack-free high-aspect ratio holes in glasses by top–down percussion drilling with infrared femtosecond laser GHz-bursts
20. Milling applications with GHz burst: investigations concerning the removal rate and machining quality10.1016/j.procir.2020.09.111 ↗
21. Mechanisms of ultrafast GHz burst fs laser ablation10.1126/sciadv.adf6397 ↗
22. Enhanced ablation efficiency for silicon by femtosecond laser microprocessing with GHz bursts in MHz bursts (BiBurst)10.1088/2631-7990/ac466e ↗
23. Ultrafast and precision drilling of glass by selective absorption of fiber-laser pulse into femtosecond-laser-induced filament10.1063/1.5027421 ↗
24. Mechanism and performance evaluation of transient and selective laser processing of glass based on optical monitoring10.1364/OE.497360 ↗
25. Investigation of multi-timescale processing phenomena in femtosecond laser drilling of zirconia ceramics10.1364/OE.474090 ↗
26. High-efficiency microdrilling of glass by parallel transient and selective laser processing with spatial light modulator10.1016/j.optlastec.2022.108306 ↗
27. Influence of laser-induced air breakdown on femtosecond laser ablation of aluminum10.1364/OE.23.001370 ↗
28. Laser machining of structural ceramics—a review10.1016/j.jeurceramsoc.2008.11.010 ↗
29. A closed form solution for laser drilling of silicon nitride and alumina ceramics10.1016/S0924-0136(03)00789-1 ↗
30. Computational and experimental studies of laser cutting of the current collectors for lithium-ion batteries10.1016/j.jpowsour.2012.03.030 ↗
31. A fiber‐laser process for cutting thick Yttria‐stabilized Zirconia: application and modeling10.1111/j.1744-7402.2010.02559.x ↗
32. Study of the wavelength dependence in laser ablation of advanced ceramics and glass-ceramic materials in the nanosecond range10.3390/ma6115302 ↗
33. Micro surface texturing of alumina ceramic with nanosecond laser10.1016/j.proeng.2017.01.155 ↗
34. Parametric studies on pulsed near ultraviolet frequency tripled Nd: YAG laser micromachining of sapphire and silicon10.1016/j.jmatprotec.2005.03.023 ↗
35. Generation mechanism and temporal–spatial evolution of electron excitation induced by an ultrashort pulse laser in zirconia ceramic10.1007/s00339-023-07223-7 ↗
36. Absorptivity transition in the 1.06 μm wavelength laser machining of structural ceramics10.1111/j.1744-7402.2009.02416.x ↗
37. Preparation and analysis of micro-holes in C/SiC composites and ablation with a continuous wave laser10.1016/j.jeurceramsoc.2020.08.033 ↗
38. Laser-stimulated luminescence of yttria-stabilized cubic zirconia crystals10.1063/1.370192 ↗
39. Modification of properties of yttria stabilized zirconia epitaxial thin films by excimer laser annealing10.1021/am506298y ↗
40. Bio-microarray fabrication techniques—a review10.1080/07388550600978358 ↗
41. Ceramics for medical applications: a picture for the next 20 years10.1016/j.jeurceramsoc.2008.08.025 ↗