Mechanical integrity of PVD TiAlN-coated PcBN: Influence of substrate bias voltage and microstructural assemblage
Source abstract
Abstract
Polycrystalline cubic boron nitrides (PcBN) have been increasingly used together with PVD coatings, mainly for hard turning operations. Within this context, effectiveness of coated PcBN as cutting tool is usually addressed by evaluation of its machining performance. Meanwhile, studies aiming to assess and understand the correlation between microstructural features and mechanical behaviour of the coating-substrate system are rather limited. Aiming to overcome such lack of information, in this study the influence of substrate bias voltage (−35 V as compared to −60 V) and microstructural assemblage (as a function of cBN content and binder chemical nature) on the mechanical integrity of TiAlN-coated PcBN systems is investigated. In doing so, contact damage response and coating adhesion strength of different coated-PcBNs are evaluated by means of indentation testing using distinct loading conditions (static and sliding) and tip geometries (spherical and conical). Such testing program is complemented by detailed FESEM inspection of the involved failure micromechanisms, as well as microstructural and micromechanical characterization of the deposited films. Results indicate that resistance against crack nucleation and propagation of coated PcBN, induced by either spherical or conical indentation, is enhanced by using harder (high content of cBN particles) and tougher (metallic binder) substrates (H-PcBN). Regarding bias voltage, systems with coatings deposited using a higher value (−60 V as compared to −35 V) show improved adhesive strength, this being particularly true for combinations involving low cBN content and ceramic binder substrate (L-PcBN). Similar beneficial effect was found, but exclusively in coated L-PcBN systems, regarding resistance to radial cracking emergence and to material removal through cohesive-failure chipping induced in Rockwell C tests. Although these findings are linked to the higher compressive residual stresses exhibited by coatings deposited under −60 V bias voltage, the latter does not translate in significant changes in microstructural and intrinsic mechanical properties of the TiAlN coating itself.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. A review of polycrystalline cubic boron nitride cutting tool developments and application
2. Synthesis and properties of single crystalline cBN and its sintered body
3. Multicomponent binders for PcBN performance enhancement in cutting tool applications10.1016/j.jeurceramsoc.2022.04.022 ↗
4. Applications for superhard and ultra-hard materials
5. Wear of a high cBN content PCBN cutting tool during hard milling of powder metallurgy cold work tool steels10.1016/j.wear.2015.01.073 ↗
6. High speed machining of Inconel 718 focusing on wear behaviors of PCBN cutting tool, Procedia CIRP
7. Development of novel CBN cutting tool for high speed machining of Inconel 718 focusing on coolant behaviors10.1016/j.promfg.2017.07.021 ↗
8. Boing · 2018 · 69
9. Assessment on abrasiveness of high chromium cast iron material on the wear performance of PCBN cutting tools in dry machining10.1016/j.jmatprotec.2017.11.054 ↗
10. Tool wear mechanisms of PcBN in machining Inconel 718: analysis across multiple length scale10.1016/j.cirp.2021.04.008 ↗
11. The effect of cBN volume fraction on the performance of PCBN composite10.1016/j.ijrmhm.2021.105643 ↗
12. Cubic form of boron nitride10.1063/1.1745964 ↗
13. Advances in the development of ultrahard cutting tool materials
14. Wear characteristics in turning high hardness alloy steel by ceramic and CBN tools10.1016/S0924-0136(98)00376-8 ↗
15. Cutting tool wear in the machining of hardened steels. Part II: cubic boron nitride cutting tool wear10.1016/S0043-1648(00)00528-7 ↗
16. De S. Galoppi, M.S. Filho, G.F. Batalha, Hard turning of tempered DIN 100Cr6 steel with coated and no coated CBN inserts10.1016/j.jmatprotec.2006.03.067 ↗
17. Wear mechanisms of PVD-coated PCBN cutting tools10.1016/j.wear.2013.01.074 ↗
18. Nc-AlTiN/a-Si3N4 and nc-AlCrN/a-Si3N4 nanocomposite coatings as protection layer for PCBN tools in hard machining10.1016/j.surfcoat.2013.09.017 ↗
19. Wear mechanisms of several cutting tool materials in hard turning of high carbon-chromium tool steel10.1016/j.triboint.2013.10.011 ↗
20. Performance evaluation of PCBN, coated carbide and mixed ceramic inserts in finish-turning of AISI D2 steel
21. Special features of the applications of cutting tools from polycrystalline cubic boron nitride with protective coatings10.3103/S1063457617040098 ↗
22. Investigation of wear resistance of coated PcBN turning tools for hard machining10.1016/j.ijrmhm.2017.12.011 ↗
23. Coated SUMIBORON BNC2010/BNC2020 for hardened steel machining realizing long and stable tool life
24. Failure and control of PCBN tools in the process of milling hardened steel10.3390/met9080885 ↗
25. Evaluation of residual stresses in PVD-coatings. Part 1-Review10.1007/s11223-010-9217-1 ↗
26. Correlation of microstructure and properties of hard coatings10.1016/0042-207X(92)90042-U ↗
27. Influence of bias variation on residual stress and texture in TiAlN PVD coatings10.1016/j.surfcoat.2005.02.078 ↗
28. Bias voltage effect on the mechanical properties, adhesion and milling performance of PVD films on cemented carbide inserts10.1016/j.wear.2018.03.001 ↗
29. An experimental investigation of work material microstructure effects on white layer formation in PCBN hard turning10.1016/j.ijmachtools.2004.07.009 ↗
30. Wear mechanisms of TiN-coated CBN tool during finish hard turning of hot tool die steel10.1243/09544054JEM1664 ↗
31. Russell · 2014
32. Study of the performance of PCBN and carbide tools in finishing machining of Inconel 718 with cutting fluid at conventional pressures10.1016/j.procir.2018.08.189 ↗
33. Scratch adhesion characteristics of PVD TiAlN deposited on high speed steel, cemented carbide and PCBN substrates10.1016/j.wear.2013.08.025 ↗
34. Spherical indentation of polycrystalline cubic boron nitride (PcBN): contact damage evolution with increasing load and microstructural effects10.1016/j.ijrmhm.2023.106115 ↗
35. A method for the non-destructive analysis of gradients of mechanical stresses by X-ray diffraction measurements at fixed penetration/information depths10.1107/S0021889806023417 ↗
36. Significant elastic anisotropy in Ti1-xAlxN alloys10.1063/1.3524502 ↗
37. Noyan · 1987
38. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
39. Problems in the physical vapour deposition of titanium nitride10.1016/0040-6090(85)90322-0 ↗
40. Defects in TiN and TiAIN coatings grown by combined cathodic arc/unbalanced magnetron technology10.1016/0042-207X(94)E0029-X ↗
41. Approaches to rid cathodic arc plasmas of macro- and nanoparticles: a review,10.1016/S0257-8972(99)00460-0 ↗
42. Chapter 6: Residual Stress Analysis
43. Ambient and elevated temperature properties of TiN, TiAlN and TiSiN PVD films and their impact on the cutting performance of coated carbide tools10.1016/j.surfcoat.2009.07.001 ↗
44. Tribomechanical behaviour of TiAlN and CrAlN coatings deposited onto AISI H11 with different pre-treatments10.3390/coatings9080519 ↗
45. Contact fatigue behavior of PVD-coated hardmetals10.1016/j.ijrmhm.2008.05.003 ↗
46. Fatigue susceptibility under contact loading of hardmetals coated with ceramic films10.1016/j.proeng.2010.03.033 ↗
47. Influence of substrate microstructure on the contact fatigue strength of coated cold-work tool steels10.1016/j.surfcoat.2011.12.012 ↗
48. Mechanical response under contact loads of AlCrN-coated tool materials10.1088/1757-899X/48/1/012003 ↗
49. TiN coating on an electrical discharge machined WC-Co hardmetal: surface integrity effects on indentation adhesion response10.1007/s10853-006-0005-z ↗
50. Influence of substrate microstructure and surface finish on cracking and delamination response of TiN-coated cemented carbides10.1016/j.wear.2016.02.004 ↗
51. Čaplovič, Adhesive-deformation relationships and mechanical properties of nc-AlCrN/a-SiNx hard coatings deposited at different bias voltages10.1016/j.tsf.2018.02.006 ↗