Microstructures, mechanical and corrosion performance of TiC/Al composites subjected to compression with torsion
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Microstructure and mechanical properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. Multiscale analysis of grain boundary microstructure in high strength 7xxx Al alloys10.1016/j.actamat.2020.10.021 ↗
2. Progress in structural materials for aerospace systems11The golden jubilee issue—selected topics in materials science and engineering: past, present and future10.1016/j.actamat.2003.08.023 ↗
3. Recent advances in ageing of 7xxx series aluminum alloys: a physical metallurgy perspective10.1016/j.jallcom.2018.11.286 ↗
4. Interface precipitation and corrosion mechanisms in a model Al–Zn–Mg–Cu alloy strengthened by TiC particles10.1016/j.corsci.2022.110533 ↗
5. Controlling the sizes of in-situ TiC nanoparticles for high-performance TiC/Al–Cu nanocomposites10.1016/j.ceramint.2021.07.017 ↗
6. Hot deformation behavior of in situ nano ZrB2 reinforced 2024Al matrix composite10.1016/j.compscitech.2015.05.006 ↗
7. Remarkable improvement in strength and ductility of Al-Cu foundry alloy by submicron-sized TiC particles10.1016/j.msea.2022.143903 ↗
8. Strengthening of dislocation and precipitation for high strength and toughness casting Al–Zn–Mg–Cu alloy via trace TiB2+TiC particles10.1016/j.msea.2022.144107 ↗
9. Experimental investigations on wear and friction behaviour of Si3N4p reinforced heat-treated aluminium matrix composites produced using electromagnetic stir casting process10.1016/j.compositesb.2018.10.074 ↗
10. Microstructure and synergistic-strengthening efficiency of CNTs-SiCp dual-nano reinforcements in aluminum matrix composites10.1016/j.compositesa.2017.11.013 ↗
11. Insight of high-entropy alloy particles-reinforced 2219 Al matrix composites via the ultrasonic casting technology10.1016/j.matchar.2021.111548 ↗
12. Initial localized corrosion induced by multiscale precipitates in the new generation high-strength Al-Zn-Mg-Cu alloy10.1016/j.corsci.2023.111516 ↗
13. Strength and ductility improvement of an in-situ TiB2/Al–Zn–Mg–Cu composite by elliptical cross-section torsion extrusion10.1016/j.compositesb.2021.108843 ↗
14. Effects of alloy elements (Mg, Zn) on the microstructure and mechanical properties of (TiC+TiB2)/Al composites10.1016/j.ceramint.2022.04.201 ↗
15. Microstructures, mechanical properties, and aging behavior of hybrid-sized TiB2 particulate-reinforced 2219 aluminum matrix composites10.1016/j.msea.2021.142180 ↗
16. Toughening of aluminum matrix nanocomposites via spatial arrays of boron carbide spherical nanoparticles10.1016/j.actamat.2015.09.057 ↗
17. Coupling of dislocations and precipitates: impact on the mechanical behavior of ultrafine grained Al–Zn–Mg alloys10.1016/j.actamat.2015.09.017 ↗
18. Enhanced grain refinement and mechanical properties of a high–strength Al–Zn–Mg–Cu–Zr alloy induced by TiC nano–particles10.1016/j.msea.2021.140852 ↗
19. Influence of TiC particle size on microstructural evolution and fracture mechanism of TiC/Al-Cu composites10.1016/j.jallcom.2024.176763 ↗
20. Investigation of the mechanical properties of TiC particle-reinforced Al–Cu alloys: insights into interface precipitation mechanisms and strengthening effects10.1016/j.jmrt.2024.06.119 ↗
21. Development of an Al 7050-10 vol.% alumina nanocomposite through cold consolidation of particles by high-pressure torsion10.1016/j.jmrt.2020.09.014 ↗
22. Effect of intermediate processing treatment on the structure and mechanical properties of Al–4 wt%Cu–3 wt%Mn alloy manufactured by electromagnetic casting followed by high-pressure torsion (HPT)10.1016/j.jallcom.2024.175753 ↗
23. Enhanced mechanical properties and microstructural stability of ultrafine-grained biodegradable Zn–Li–Mn–Mg–Cu alloys produced by rapid solidification and high-pressure torsion10.1016/j.msea.2023.146027 ↗
24. Effects of in-process cryocooling on metallurgical and mechanical properties of friction stir processed Al7075 alloy10.1016/j.matchar.2018.08.001 ↗
25. Synergistic enhancement of mechanical performance in wire-arc directed energy deposited Al-Zn-Mg-Cu alloys through interlayer friction stir processing, concurrent forced cooling, and post-deposition heat treatment10.1016/j.jmapro.2024.05.059 ↗
26. Microstructural and mechanical properties of Al 7075 alloy processed by equal channel angular pressing10.1016/j.msea.2011.11.031 ↗
27. Characterization of precipitates in an Al-Zn-Mg alloy processed by ECAP and subsequent annealing10.1016/j.msea.2017.11.091 ↗
28. Extreme grain refinement by severe plastic deformation: a wealth of challenging science10.1016/j.actamat.2012.10.038 ↗
29. Analytical and numerical approaches to modelling severe plastic deformation10.1016/j.pmatsci.2018.02.001 ↗
30. High pressure deformation induced precipitation in Al–Zn–Mg–Cu alloy (Al7075)10.1016/j.msea.2022.143765 ↗
31. Achieving ultra-fine grains and high corrosion resistance of Al–Zn–Mg–Cu alloy by ECAP and post cold rolling10.1016/j.jmrt.2023.09.070 ↗
32. High-pressure-torsion-induced segregation, precipitation and grain refinement of Al-(Si, Mg and Cu) binary alloys10.1016/j.jmst.2024.02.046 ↗
33. Effects of nanosized TiC and TiB2 particles on the corrosion behavior of Al-Mg-Si alloy10.1016/j.corsci.2020.108479 ↗
34. Grain boundary segregation of alloying Cu induced intergranular corrosion of B4C-6061Al composite10.1016/j.matchar.2021.110930 ↗
35. Effect of equal-channel angular pressing on microstructure, aging kinetics and impact behavior in a 7075 aluminum alloy
36. Manufacturing of bulk Al-12Zn-3.7Mg-1Cu alloy with TiC nanoparticles10.1016/j.promfg.2020.05.054 ↗
37. The nanoscale mechanisms of strengthening and ductility enhancement in an Al–Mg–Si–Mn alloy on processing by high-pressure torsion10.1016/j.matchar.2023.113145 ↗
38. Strengthening of an Al-Cu-Mg alloy processed by high-pressure torsion due to clusters, defects and defect-cluster complexes10.1016/j.msea.2014.12.107 ↗
39. Wire arc additive manufacturing of components using TiC/Ti reinforced Al-Zn-Mg-Cu alloy wire: microstructure evolution, strengthening mechanism, and fracture behavior10.1016/j.matchar.2024.114452 ↗
40. Optimizing the mechanical and corrosion properties of an ultrafine-grained Al-Cu-Mg alloy through cyclic deformation: clusters and lattice defects10.1016/j.jallcom.2024.176173 ↗
41. Corrosion behavior of nano-treated AA7075 alloy with TiC and TiB2 nanoparticles10.1016/j.corsci.2022.110479 ↗
42. Phase transformation and mechanical properties of nanocrystalline Ti–2Fe-0.1B alloy processed by high pressure torsion10.1016/j.jmrt.2024.06.164 ↗
43. Study of microstructural evolution, mechanical properties and plastic deformation behavior of Mg-Gd-Y-Zn-Zr alloy prepared by high-pressure torsion10.1016/j.msea.2023.145953 ↗
44. Dislocation emission from deformation-distorted grain boundaries in ultrafine-grained materials10.1016/j.scriptamat.2013.12.012 ↗
45. Review on superior strength and enhanced ductility of metallic nanomaterials10.1016/j.pmatsci.2018.02.002 ↗
46. Microstructural evolution and mechanical properties of a two-phase Cu-Ag alloy processed by high-pressure torsion to ultrahigh strains10.1016/j.actamat.2011.01.017 ↗
47. High-pressure torsion of pure metals: influence of atomic bond parameters and stacking fault energy on grain size and correlation with hardness10.1016/j.actamat.2011.07.046 ↗
48. Effects of submicron-sized TiC particles on the microstructure modification and mechanical properties of Al-Si-Mg alloy10.1016/j.jallcom.2023.171963 ↗
49. Study on nano-treating of Al-Mg-Si-Cu alloys with TiC nanoparticles10.1016/j.jallcom.2023.169405 ↗
50. Interface precipitation and corrosion mechanisms in a model Al-Zn-Mg-Cu alloy strengthened by TiC particles10.1016/j.corsci.2022.110533 ↗
51. A model for the yield strength of overaged Al–Zn–Mg–Cu alloys10.1016/S1359-6454(03)00363-X ↗
52. Superior strength of laser-arc hybrid additive manufactured Al-Zn-Mg-Cu alloy enabled by a tunable microstructure
53. Achieving ultra-high strength of Al-Cu-Li alloys by the combination of high pressure torsion and age-hardening10.1016/j.msea.2021.142504 ↗
54. Achieving high strength-ductility of Al-Zn-Mg-Cu alloys via hot-wire arc additive manufacturing enabled by strengthening precipitates
55. General relationship between strength and hardness10.1016/j.msea.2011.08.061 ↗
56. Fe- and Co-based bulk glassy alloys with ultrahigh strength of over 4000MPa10.1016/j.intermet.2006.01.038 ↗
57. Validation of hardness and tensile strength of Al-Mg alloy reinforced with silicon carbide and graphite hybrid composite by regression equation10.1016/j.matpr.2021.12.079 ↗
58. Effect of local variations in thermal history on the microstructures and hardness of a high-strength, low-alloy martensitic steel made by directed energy deposition10.1016/j.msea.2024.146890 ↗
59. Evidence for two-stage hardening in an Al-Zn-Mg-Cu alloy processed by high-pressure torsion10.1016/j.jallcom.2023.168839 ↗
60. Effect of precipitates on nanostructuring and strengthening of high-strength aluminum alloys under high pressure torsion10.1016/j.jallcom.2018.02.047 ↗
61. Characterisation of high pressure torsion processed 7150 Al–Zn–Mg–Cu alloy10.1016/j.msea.2012.05.026 ↗
62. Strengthening mechanisms in an ultrafine-grained AlZnMgCu alloy processed by high pressure torsion at different temperatures10.1016/j.msea.2019.02.094 ↗
63. The effect of severe plastic deformation on precipitation in supersaturated Al–Zn–Mg alloys10.1016/j.msea.2007.01.001 ↗
64. Effect of ECAP temperature on microstructure and mechanical properties of Al–Zn–Mg–Cu alloy10.1016/j.pnsc.2016.03.003 ↗
65. Microstructures and mechanical properties of ultrafine grained 7075 Al alloy processed by ECAP and their evolutions during annealing10.1016/j.actamat.2004.06.017 ↗
66. Mechanical properties, microstructure and texture of single pass equal channel angular pressed 1050, 5083, 6082 and 7010 aluminum alloys with different dies10.1016/j.matdes.2011.03.006 ↗
67. Investigation of microstructural and mechanical properties of Al alloy 7075-T6/B4C nanocomposite concocted via friction stir process10.1016/j.ceramint.2022.06.212 ↗
68. Effects of mechanical and chemical pre-treatments on the morphology and composition of surfaces of aluminium alloys 7075-T6 and 2024-T310.1016/j.corsci.2017.02.018 ↗
69. Forming mechanism, mechanical properties, and corrosion properties of aluminum alloy sheet with gradient structure processed by plastic flow machining10.1016/j.jallcom.2022.167800 ↗
70. Regulating hardness homogeneity and corrosion resistance of Al-Zn-Mg-Cu alloy via ECAP combined with inter-pass aging10.1016/j.matchar.2024.114489 ↗
71. First-principles study on surface corrosion of 6082 aluminum alloy in H+ and Cl− medium10.1016/j.molstruc.2023.136570 ↗
72. Effects of nanosized TiC and TiB2 particles on the corrosion behavior of Al-Mg-Si alloy10.1016/j.corsci.2020.108479 ↗
73. Strengthening of an Al–Cu–Mg alloy processed by high-pressure torsion due to clusters, defects and defect–cluster complexes10.1016/j.msea.2014.12.107 ↗
74. In-situ tailoring microstructure by directly synthesized TiC–TiB2 nanoparticles to achieve well-balanced strength and ductility in Al–Cu alloy10.1016/j.msea.2023.145350 ↗