Effect of Microstructure on Wear and Corrosion Performance of Thermally Sprayed AlCoCrFeMo High‐Entropy Alloy Coatings
Source abstract
Abstract
High entropy alloys (HEAs) represent a new class of advanced metallic alloys that exhibit unique structural features and promising properties. The potential benefit of HEAs, in conjunction with established thermal spray manufacturing technologies, can provide a practical approach to mitigate wear and corrosion. Equiatomic AlCoCrFeMo HEA were fabricated using cold‐spraying and flame‐spraying, aiming to investigate the effect of low‐temperature and high‐temperature responses to phase formations, microstructural evolution, and microhardness. The performance evaluation during abrasive damage and electrochemical corrosion were also investigated. Microstructural studies revealed that coatings with body‐centered cubic (BCC) phases, where oxides were found in the flame‐sprayed coatings during in‐flight deposition. Hardness of the flame‐sprayed coatings showed noticeably (5.78 ± 0.45 GPa) higher than to that of the cold‐sprayed coatings (3.6 ± 0.48 GPa). Lower wear rates were achieved for the flame‐sprayed coatings (compared to the cold‐sprayed coatings. Oxide formations in the flame‐sprayed coatings decreased its corrosion performance such that it was two times lower than that of cold‐sprayed coatings. The results show that the microstructural features of flame‐sprayed coatings, coupled with formation of oxide inclusions resulted in improved resistance to damage due to wear loading, but undermined resistance to electrochemical degradation.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · High Entropy Alloys Studies · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering University of Alberta Edmonton AB T6G 1H9 Canada
Department of Mechanical Engineering Shiv Nadar University Gautam Buddha Nagar Uttar Pradesh 203207 India
Funding
Natural Sciences and Engineering Research Council of Canada
References (67)
Show source-provided references
1. 10.1016/j.surfcoat.2020.12632810.1016/j.surfcoat.2020.126328 ↗
2. 10.1016/j.surfcoat.2020.12637910.1016/j.surfcoat.2020.126379 ↗
3. 10.3390/e2207074010.3390/e22070740 ↗
4. 10.1002/adem.20030056710.1002/adem.200300567 ↗
5. 10.1016/j.wear.2019.20302810.1016/j.wear.2019.203028 ↗
6. 10.1080/21663831.2014.91269010.1080/21663831.2014.912690 ↗
7. 10.1016/j.jallcom.2021.16230910.1016/j.jallcom.2021.162309 ↗
8. 10.1038/s41467-018-07882-810.1038/s41467-018-07882-8 ↗
9. 10.1016/j.ultsonch.2017.09.04410.1016/j.ultsonch.2017.09.044 ↗
10. 10.3390/met702004310.3390/met7020043 ↗
11. 10.1016/B978-0-12-800251-3.00002-X10.1016/B978-0-12-800251-3.00002-X ↗
12. 10.1016/j.intermet.2010.05.01410.1016/j.intermet.2010.05.014 ↗
13. 10.1016/j.msea.2003.10.25710.1016/j.msea.2003.10.257 ↗
14. 10.1016/j.intermet.2016.03.00210.1016/j.intermet.2016.03.002 ↗
15. 10.1016/j.jallcom.2012.11.10010.1016/j.jallcom.2012.11.100 ↗
16. 10.1002/adem.20200062610.1002/adem.202000626 ↗
17. 10.1016/j.msea.2016.10.03810.1016/j.msea.2016.10.038 ↗
18. 10.1016/j.scriptamat.2014.11.03710.1016/j.scriptamat.2014.11.037 ↗
19. 10.1016/j.surfcoat.2017.02.07310.1016/j.surfcoat.2017.02.073 ↗
20. 10.1007/s11665-020-04700-510.1007/s11665-020-04700-5 ↗
21. Davis J. · 2004 · 1
22. 10.1016/j.jallcom.2020.15714010.1016/j.jallcom.2020.157140 ↗
23. 10.1007/s11666-020-01047-010.1007/s11666-020-01047-0 ↗
24. 10.1016/j.jallcom.2021.15960710.1016/j.jallcom.2021.159607 ↗
25. 10.1007/s11666-017-0660-410.1007/s11666-017-0660-4 ↗
26. 10.1557/jmr.2019.3810.1557/jmr.2019.38 ↗
27. 10.1007/s11106-021-00203-710.1007/s11106-021-00203-7 ↗
28. 10.1016/j.jmst.2018.12.01510.1016/j.jmst.2018.12.015 ↗
29. 10.3390/coatings1001005310.3390/coatings10010053 ↗
30. Wu H. · Int. J. Refract. Met. Hard Mater. · 2021 · 105721
31. 10.1557/jmr.2019.3710.1557/jmr.2019.37 ↗
32. ASTM E384-17 Standard Test Method for Microindentation Hardness of Materials ASTM International West Conshohocken PA2017.
33. 10.1080/00224065.1993.1197943110.1080/00224065.1993.11979431 ↗
34. ASTM G65-16e1 Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus ASTM International West Conshohocken PA2016.
35. 10.1149/1.349401610.1149/1.3494016 ↗
36. 10.1088/1468-6996/15/3/03501410.1088/1468-6996/15/3/035014 ↗
37. 10.1016/j.apsusc.2019.14411710.1016/j.apsusc.2019.144117 ↗
38. 10.1063/1.358722810.1063/1.3587228 ↗
39. 10.1002/adem.20180016310.1002/adem.201800163 ↗
40. 10.1361/10599639977035027810.1361/105996399770350278 ↗
41. 10.1016/j.surfcoat.2020.12594710.1016/j.surfcoat.2020.125947 ↗
42. Williamson G. K. · J. Theor. Exp. App. Phys. · 1956 · 1 · 34
43. 10.1016/0001-6160(53)90006-610.1016/0001-6160(53)90006-6 ↗
44. 10.1016/j.actamat.2016.01.05010.1016/j.actamat.2016.01.050 ↗
45. 10.1016/j.surfcoat.2020.12543010.1016/j.surfcoat.2020.125430 ↗
46. 10.1016/j.tsf.2006.03.01010.1016/j.tsf.2006.03.010 ↗
47. 10.1007/s11661-014-2644-z10.1007/s11661-014-2644-z ↗
48. Robie R. A. · 1995
49. 10.1016/0921-5093(93)90319-A10.1016/0921-5093(93)90319-A ↗
50. Dieter G. E. · 1976
51. 10.1016/j.intermet.2021.10733710.1016/j.intermet.2021.107337 ↗
52. 10.1016/j.tsf.2019.13743410.1016/j.tsf.2019.137434 ↗
53. 10.3390/ma1205069410.3390/ma12050694 ↗
54. 10.1016/j.matdes.2021.11027710.1016/j.matdes.2021.110277 ↗
55. 10.1016/j.corsci.2018.01.03010.1016/j.corsci.2018.01.030 ↗
56. 10.1021/acsomega.0c0305310.1021/acsomega.0c03053 ↗
57. 10.1016/j.surfcoat.2017.05.05710.1016/j.surfcoat.2017.05.057 ↗
58. 10.1007/s12613-020-2000-910.1007/s12613-020-2000-9 ↗
59. 10.1016/j.wear.2013.08.00610.1016/j.wear.2013.08.006 ↗
60. 10.1016/j.jnucmat.2004.09.02410.1016/j.jnucmat.2004.09.024 ↗
61. 10.1016/j.msea.2008.09.00310.1016/j.msea.2008.09.003 ↗
62. 10.1016/j.jmatprotec.2005.12.00610.1016/j.jmatprotec.2005.12.006 ↗
63. 10.1016/j.actamat.2012.10.01110.1016/j.actamat.2012.10.011 ↗
64. 10.1016/j.surfcoat.2014.05.00910.1016/j.surfcoat.2014.05.009 ↗
65. 10.1361/10599630177034958310.1361/105996301770349583 ↗
66. 10.1179/mst.1994.10.6.51310.1179/mst.1994.10.6.513 ↗
67. 10.1016/S0043-1648(01)00718-910.1016/S0043-1648(01)00718-9 ↗