journal article·2012-01

Influence of reduced substrate shunting current on cell performance in integrated planar solid oxide fuel cells

Keonseok Oh, Joosun Kim, Sun Hee Choi, Daehee Lee, Jooho Moon

Ceramics International· Volume 38· Issue 1
Publisher page

Abstract

Abstract Two-cell arrayed integrated planar solid oxide fuel cells (IP-SOFCs) were fabricated using a robo-dispensing method. Special emphasis was placed on the influence of reduced shunting current on cell performance. The resistivity of the substrate increased according to a mixture rule of composites by adding Al 2 O 3 into the substrate of partially stabilized zirconia (PSZ). This strategy, which reduces shunting current through the substrate, enhances the power output. When the amount of Al 2 O 3 added was more than 26 vol%, however, the Ni anode migrated into the PSZ substrate to react with Al 2 O 3 , which led to performance degradation. In the case of the two-cell arrayed IP-SOFC with a 20 vol%-Al 2 O 3 added to the PSZ substrate, a reduced shunting current loss improved the power density by 30% compared to that of the Al 2 O 3 -free substrate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. SOFC technology development at Rolls-Royce10.1016/S0378-7753(99)00428-0 ↗
2. Effect of cell width on segmented-in-series SOFCs10.1149/1.1649398 ↗
3. Design considerations for segmented-in-series fuel cells10.1016/j.jpowsour.2005.01.002 ↗
4. Effect of cathode sheet resistance on segmented-in-series SOFC power density10.1016/j.jpowsour.2006.10.075 ↗
5. Electrode supported solid oxide fuel cells prepared by DC magnetron sputtering10.1016/S0167-2738(97)00248-8 ↗
6. Low-temperature solid-oxide fuel cells utilizing thin bi-layer electrolytes10.1149/1.1837635 ↗
7. Short-period segmented-in-series solid oxide fuel cells on flattened tube supports10.1016/j.jpowsour.2006.09.079 ↗
8. Direct-write fabrication of integrated planar solid oxide fuel cells10.1007/s10832-006-6005-1 ↗
9. The coat-mix procedure using carbon fillers10.1016/S0008-6223(96)00120-0 ↗
10. Kingery · 1976
11. Structural variation in nickel aluminate spinel
12. O’Hayre · 2006
13. German · 1989