journal article·2014-08Open access

The effect of a constraint on the sintering and stress development in alumina thick films

Mark Tillman, Julie A. Yeomans, Robert A. Dorey

Ceramics International· Volume 40· Issue 7

Abstract

The microstructural and stress evolution of thick (25 μm) alumina films on dense alumina substrates sintered at temperatures from 1300 °C to 1600 °C has been investigated. In this study the constraint on sintering was monitored in the absence of significant differences in thermal expansion between the film and the substrate. For comparison purposes unconstrained alumina pellets sintered at 1300 °C-1600 °C were also examined. Overall, the constrained alumina densified less than the free alumina, as expected, although at intermediate temperatures densification rates were comparable. Sintering in the direction perpendicular to the substrate was enhanced with respect to that parallel to the substrate as a means of stress relaxation. Using fluorescence spectroscopy the residual stresses of the films parallel to the substrates were measured; residual tensile stresses as high as 450±40 MPa were exhibited by the films. The considerable stress development resulted in cracking and delamination of the film from the substrate, subsequently film constraint was reduced and densification was not impeded. © 2014 The Authors.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Electronic Packaging and Soldering Technologies · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. On constrained sintering-III: Rigid inclusions.10.1016/0001-6160(88)90191-5 ↗
2. Crack growth and damage in constrained sintering films10.1111/j.1151-2916.1993.tb03969.x ↗
3. Rahaman · 1995
4. Sintering behaviour of ceramic films constrained by a rigid substrate10.1111/j.1151-2916.1985.tb15227.x ↗
5. A sintering model for plasma-sprayed zirconia thermal barrier coatings. Part II: coatings bonded to a rigid substrate10.1016/j.actamat.2008.10.058 ↗
6. Electroceramic thick film fabrication for MEMS10.1023/B:JECR.0000033999.74149.a3 ↗
7. Deposition and sintering of particle films on a rigid substrate10.1111/j.1151-2916.1987.tb05645.x ↗
8. The effect of a substrate on the sintering of constrained films10.1016/j.actamat.2008.09.041 ↗
9. Measurement of residual stress distributions in Al2O 3/3Y-TZP multilayered composites by fluorescence and Raman microprobe piezo-spectroscopy10.1016/j.actamat.2004.12.003 ↗
10. Development of residual stress in sol–gel derived Pb (Zr,Ti) O3 films: an experimental study10.1063/1.2890142 ↗
11. Origin of compressive residual stress in alkoxide derived PbTiO3 thin film on Si wafer10.1143/JJAP.47.7514 ↗
12. The tension of metallic films deposited by electrolysis10.1098/rspa.1909.0021 ↗
13. In-depth analysis of residual stress in an alumina coating on silicon nitride substrate using confocal Raman piezo-spectroscopy10.1016/j.actamat.2006.05.038 ↗
14. Residual stress distributions around indentations and scratches in polycrystalline Al2O3 and Al2O3/SiC nanocomposites measured using fluorescence probes10.1016/j.actamat.2007.09.014 ↗
15. Piezospectroscopic study of residual stresses in Al2O3-ZrO2 directionally solidified eutectics10.1111/j.1151-2916.2000.tb01626.x ↗
16. Determination of fibre strength distributions from bundle tests using optical luminescence spectroscopy10.1098/rspa.1997.0101 ↗
17. Piezo-spectroscopic mapping of the thermally grown oxide in thermal barrier coatings10.1016/j.msea.2007.04.081 ↗
18. Potential use of the ruby R2 line shift for static high-pressure calibration10.1063/1.104594 ↗
19. Focus effect of photoluminescence piezospectroscopy and its influence on the stress measurement of thermally grown oxide in thermal barrier coatings10.1016/j.scriptamat.2007.06.046 ↗
20. Residual stresses and constrained sintering of YSZ/Al2O3 composite coatings10.1016/j.actamat.2004.02.007 ↗
21. Confocal fluorescence microscopy in alumina-based ceramics: where does the signal come from?10.1016/j.jeurceramsoc.2009.08.020 ↗
22. Linear intercept technique for measuring grain size in two-phase polycrystalline ceramics10.1111/j.1151-2916.1972.tb11224.x ↗
23. Microstructural characterization of alumina films during constrained sintering10.1111/j.1551-2916.2009.03471.x ↗
24. Constrained sintering of 8mol% Y2O3 stabilised zirconia films10.1016/j.jeurceramsoc.2012.05.036 ↗
25. Constrained densification of alumina/zirconia hybrid laminates, II: viscoelastic stress computation.10.1111/j.1151-2916.1997.tb03076.x ↗
26. Shape distortion and delamination during constrained sintering of ceramic stripes: discrete element simulations and experiments10.1111/j.1551-2916.2011.04939.x ↗