journal article·2013-05

Control of H2O generated during the CO2 hardening process in a casting mold

Eun-Hee Kim, Je-Hyun Lee, Yeon-Gil Jung, Jung-Chel Jang, Ungyu Paik

Ceramics International· Volume 39· Issue 4
Publisher page

Abstract

Abstract An additive reagent was introduced into a water glass binder system for enhancing the mechanical properties and dimension stability of a casting mold, and for improving the surface quality of a cast product. Two different processes with three different additive reagents were employed to investigate the relation between fracture strength of the mold and water (H2O) existed in the mold. In processes I and II, the mold samples were coated with a water glass binder, and then dipped into different solutions with additive reagent after and before carbon dioxide (CO2) hardening, respectively. The fracture strength of the mold was enhanced by reducing H2O content in the mold, achieved by a hydrolysis reaction of additive reagents. In process I, the H2O movement was restricted in the mold by the solid phase, converted from the water glass during CO2 hardening. When employing process II, especially in the TEOS used as additive reagent, the fracture strength was significantly increased due to the effective reduction of H2O content in the mold and the homogeneous generation of glass phase by a sol–gel reaction of the additives.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Materials Engineering and Processing · Injection Molding Process and Properties · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Modeling transient slag-layer phenomena in the shell/mold gap in continuous casting of steel10.1007/s11663-003-0041-x ↗
2. An investigation into stainless-steel/structure-alloy-steel bimetal produced by shell mould casting10.1016/j.matdes.2008.04.074 ↗
3. Properties of ceramic casting molds produced with two different binders10.1016/j.ceramint.2004.10.004 ↗
4. Accelerated curing of cementitious system by carbon dioxide10.1016/0008-8846(72)90111-1 ↗
5. Investigations on the influence of the addition of carbon dioxide on the production and properties of rapidly set wood–cement composites10.1016/0958-9465(95)00009-2 ↗
6. Reid · 1877
7. E.B. Stuart, Method for Producing a Hard Paving or Surfacing Materials, U.S. Patent no. 352, 172, 1970.
8. L.G. Imperato, Methods and Composition for the Manufacture of Portland Cement, U.S. Patent no. 360, 737, 1971.
9. A contribution to study of process on the steel cast–sand mould contact surface during casting10.1016/S0167-577X(00)00111-7 ↗
10. ASTM Standards C 1161–02C, Standard Test Method for Flexural Strength of Advanced Ceramic at Ambient Temperature, American Society of Testing and Materials, Philadelphia, PA, USA.
11. Barsoum · 1997
12. Callister · 1997
13. Ege · 1994
14. A new binder system for preparing high strength inorganic molds in precision casting10.1016/j.matchemphys.2010.11.015 ↗
15. A new in situ process in precision casting for mold fabrication10.1016/j.jeurceramsoc.2011.03.013 ↗
16. Powder preparation for a shell mold using a new coating process10.1016/j.ceramint.2011.11.044 ↗