Hydrothermal synthesized AZO Nanorods layer as a high potential buffer layer for inverted polymer solar cell
Source abstract
Abstract
Abstract In this study, the performance of inverted polymer solar cell was improved using optically and electrically tuned Zn 1-x Al x O (x = 0, 0.005, 0.01 and 0.015) nanorods (AZO) as a high potential electron transporting layer. AZO nanorods with different compositions were synthesized using facile, low temperature, and low cost hydrothermal method that was confirmed by energy dispersive x- ray spectroscopy (EDS) analysis. As revealed, the optical transmittance and optical band gap increased by increasing the Al concentration in AZO nanorods. The fabricated device with ITO/Zn 1-x Al x O nanorods / P 3 HT: PCBM /WO 3 /Ag structure showed ascending trend for its short-circuit current density (J sc ) by increasing the amount of Al doping. The inverted polymer solar cell with 1% Al doped ZnO nanorods showed a power conversion efficiency of 3.64% that is around 40% higher than that of the device with pure ZnO nanorods (2.58%). The performance enhancement was attributed to the combined effects of the improvement in charge collection and the higher optical transmittance of AZO in the visible range.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Acceptor-rich bulk heterojunction polymer solar cells with balanced charge mobilities10.1016/j.orgel.2017.08.031 ↗
2. Indacenodithiophene-based D-A conjugated polymers for application in polymer solar cells10.1016/j.orgel.2017.06.059 ↗
3. High efficiency inverted polymer solar cells with solution-processed ZnO buffer layer10.1007/s10971-014-3514-2 ↗
4. The effect of post-annealing on the interface between the aluminum electrode and the active layer in polymer/fullerene solar cells10.1007/s00339-014-8550-9 ↗
5. Inverted polymer solar cells including ZnO electron transport layer fabricated by facile spray pyrolysis10.1016/j.solmat.2013.05.062 ↗
6. Inverted polymer solar cells integrated with a low- temperature-annealed sol-gel-derived ZnO film as an electron transport layer10.1002/adma.201004301 ↗
7. Performance improvement of inverted polymer solar cells with different top electrodes by introducing a MoO3 buffer layer10.1063/1.3026741 ↗
8. Efficient inverted polymer solar cells10.1063/1.2212270 ↗
9. Enhanced electrical and optical properties based on stress reduced graded structure of Al-doped ZnO thin films10.1016/j.ceramint.2017.09.240 ↗
10. Effect of Co doping on structural and optical properties of zinc oxide nanoparticles synthesized by sol-gel method10.4236/anp.2016.51010 ↗
11. Highly efficient flexible inverted organic solar cells using atomic layer deposited ZnO as electron selective layer10.1039/B921396A ↗
12. Structural, electrical, and optical properties of Ti-doped ZnO films fabricated by atomic layer deposition10.1186/1556-276X-8-108 ↗
13. Effects of H2 plasma treatment on properties of ZnO:Al thin films prepared by RF magnetron sputtering10.1016/j.surfcoat.2011.05.033 ↗
14. Electrodeposition of semiconductors for optoelectronic devices: results on zinc oxide10.1016/S0013-4686(00)00405-9 ↗
15. Growth and characterization of ZnO thin films prepared by electrodeposition technique10.1016/j.solmat.2005.10.010 ↗
16. Tailoring energy bandgap of Al doped ZnO thin films grown by vacuum thermal evaporation method10.1166/jnn.2015.11619 ↗
17. Effect of tin doping on optical properties of nanostructured ZnO thin films grown by spray pyrolysis technique10.1016/j.jallcom.2014.07.086 ↗
18. Growth and optical properties of ZnO nanorod arrays on Al-doped ZnO transparent conductive film10.1186/1556-276X-8-158 ↗
19. Density-controlled ZnO nanorod arrays in polymer solar cells based on poly(3-hexylthiophene) and indene-C60 bis-adduct10.1007/s13391-013-2240-1 ↗
20. Efficiency enhancement of polymer photovoltaic devices hybridized with ZnO nanorod arrays by the introduction of a vanadium oxide buffer layer10.1063/1.2972113 ↗
21. Comparison between ZnO nanowires grown by chemical vapor deposition and hydrothermal synthesis10.1007/s00339-013-7838-5 ↗
22. Electrochemically grown ZnO nanorods for hybrid solar cell applications10.1016/j.solener.2009.12.013 ↗
23. Growth of well-aligned ZnO nanorod arrays on Si substrates by thermal evaporation of Cu–Zn alloy powders10.1166/jnn.2010.1699 ↗
24. Effects of doping with Al, Ga, and In on structural and optical properties of ZnO nanorods grown by hydrothermal method10.5012/bkcs.2013.34.4.1205 ↗
25. Synthesis and conductivity enhancement of Al-doped ZnO nanorod array thin films10.1088/0957-4484/21/28/285603 ↗
26. Performance enhancement of inverted polymer solar cells using roughened Al-doped ZnO nanorod array10.1143/APEX.5.122302 ↗
27. Improved photovoltaic performance of inverted polymer solar cells through a sol-gel processed Al-doped ZnO electron extraction layer10.1364/OE.23.0A1334 ↗
28. Sol–gel synthesized zinc oxide nanorods and their structural and optical investigation for optoelectronic application10.1186/1556-276X-9-429 ↗
29. ZnO nanorods on ZnO seed layer derived by sol–gel process10.1007/s10971-009-2138-4 ↗
30. Influence of Al doping on structural and optical properties of hydrothermally grown ZnO nanorods
31. Effects of aluminium doping and electrode distance on the performance of aligned zinc oxide nanorod array-based ultraviolet photoconductive sensors10.1143/JJAP.51.06FE04 ↗
32. Hydrothermal growth and characterization of Al-doped ZnO nanorods10.1016/j.matpr.2016.04.061 ↗
33. Optimization and characterization of NiO thin film and the influence of thickness on the electrical properties of n-ZnO nanorods/p-NiO heterojunction10.1088/0268-1242/29/11/115009 ↗
34. Synthesis and conductivity enhancement of Al-doped ZnO nanorod array thin films10.1088/0957-4484/21/28/285603 ↗
35. Electrical and optical properties of aluminium doped zinc oxide transparent conducting oxide films prepared by dip coating technique10.1108/MI-06-2015-0058 ↗